Last updated at 05/13/2026 11:27:50
2g (2.20mm) Zinc Pan Phillips (PH1) Self Tapping Screws ANSI B18.6.4
Next-day delivery $5
2g (2.20mm) x 1/4" Pan Phillips (PH1) Self Tapping Screw Zinc Plated ANSI B18.6.4
Next-day delivery $5
Zinc Plated 4g (2.9mm) Pan Head Phillips Self Tapping Tapper Screw
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
2g-32 X 1/4" Pan Phillips (ph1) Self Tapper Screw Zinc Plated Ansi
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Hobsons - #2-32 x 1/4 Zinc Plated (Rohs Compliant) Ansi B18.6.3 Type Ab Self-Tapper Pan Phil | Tzpp02025 (Pack Of 1000)
Delivery between 14–22 May $7.95
No. 2-32 x 1/4" Phillips Pan Head Self Tapping Screw Zinc - Box of 1000
Delivery between 18–25 May $12.61
| Size | 2g (2.20mm) |
| Drive Type | Phillips |
| System of Measurement | Screw Gauge |
| Head Type | Pan Head |
| Finish | Zinc Plated |
2g (2.20mm) Zinc Pan Phillips (PH1) Self Tapping Screws ANSI B18.6.4
Next-day delivery $5
2g (2.20mm) x 1/4" Pan Phillips (PH1) Self Tapping Screw Zinc Plated ANSI B18.6.4
Next-day delivery $5
Zinc Plated 4g (2.9mm) Pan Head Phillips Self Tapping Tapper Screw
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
2g-32 X 1/4" Pan Phillips (ph1) Self Tapper Screw Zinc Plated Ansi
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Hobsons - #2-32 x 1/4 Zinc Plated (Rohs Compliant) Ansi B18.6.3 Type Ab Self-Tapper Pan Phil | Tzpp02025 (Pack Of 1000)
Delivery between 14–22 May $7.95
| Size | 2g (2.20mm) |
| Drive Type | Phillips |
| System of Measurement | Screw Gauge |
| Head Type | Pan Head |
| Finish | Zinc Plated |
Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally whilst some people use it externally it isnt recommended if corrosion may be a concern instead search our Stainless steel range Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally whilst some people use it externally it isnt recommended if corrosion may be a concern instead search our Stainless steel range Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally whilst some people use it externally it isnt recommended if corrosion may be a concern instead search our Stainless steel range Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally whilst some people use it externally it isnt recommended if corrosion may be a concern instead search our Stainless steel range Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
