The Bambu Lab Hotend features a unique all-in-one design that combines the heat sink, neck, heating block and nozzle into one unit. This design offers several advantages, including faster heat-up times compared to conventional hotends and a reduction in filament leakage or spillage at the interface between the nozzle and heat break. By integrating all components, the Bambu Lab hotend minimises the number of potential failure points and simplifies maintenance and assembly. Overall, this innovative design can provide a more efficient and reliable 3D printing experience. Bambu Lab offers hotends in two configurations: a single hotend with nozzle and a complete hotend assembly. The complete hotend assembly includes the hotend with nozzle, a fan, a ceramic heater, a thermistor and a silicone sock. It comes pre-assembled and ready to use with your Bambu Lab 3D printer. If you need to change your nozzle diameter, you can replace the hotend with the nozzle on your original complete hotend assembly or purchase a new complete hotend assembly. Please confirm your printer model before purchasing as the connections may differ between the X1 series version and the P1P version. Installation: With its robust and long service life, the complete hotend assembly can be easily installed and replaced.
The Bambu Lab Hotend features a unique all-in-one design that combines the heat sink, neck, heating block and nozzle into one unit. This design offers several advantages, including faster heat-up times compared to conventional hotends and a reduction in filament leakage or spillage at the interface between the nozzle and heat break. By integrating all components, the Bambu Lab hotend minimises the number of potential failure points and simplifies maintenance and assembly. Overall, this innovative design can provide a more efficient and reliable 3D printing experience. Bambu Lab offers hotends in two configurations: a single hotend with nozzle and a complete hotend assembly. The complete hotend assembly includes the hotend with nozzle, a fan, a ceramic heater, a thermistor and a silicone sock. It comes pre-assembled and ready to use with your Bambu Lab 3D printer. If you need to change your nozzle diameter, you can replace the hotend with the nozzle on your original complete hotend assembly or purchase a new complete hotend assembly. Please confirm your printer model before purchasing as the connections may differ between the X1 series version and the P1P version. Installation: With its robust and long service life, the complete hotend assembly can be easily installed and replaced.
There are no live offers for Bambu Hotend - P1 Series - Bambu Lab AU 0.2mm Stainless Steel / Complete Hotend right now. The all-time low we recorded was $2.13 on 22 June 2026. Set a price alert to hear when it's back in stock.
Prices last updated 3 Sept 2026.
Bambu Hotend - P1 Series - Bambu Lab AU 0.2mm Stainless Steel / Complete Hotend
The Bambu Lab Hotend features a unique all-in-one design that combines the heat sink, neck, heating block and nozzle into one unit. This design offers several advantages, including faster heat-up times compared to conventional hotends and a reduction in filament leakage or spillage at the interface between the nozzle and heat break. By integrating all components, the Bambu Lab hotend minimises the number of potential failure points and simplifies maintenance and assembly. Overall, this innovative design can provide a more efficient and reliable 3D printing experience. Bambu Lab offers hotends in two configurations: a single hotend with nozzle and a complete hotend assembly. The complete hotend assembly includes the hotend with nozzle, a fan, a ceramic heater, a thermistor and a silicone sock. It comes pre-assembled and ready to use with your Bambu Lab 3D printer. If you need to change your nozzle diameter, you can replace the hotend with the nozzle on your original complete hotend assembly or purchase a new complete hotend assembly. Please confirm your printer model before purchasing as the connections may differ between the X1 series version and the P1P version. Installation: With its robust and long service life, the complete hotend assembly can be easily installed and replaced.
The Bambu Lab Hotend features a unique all-in-one design that combines the heat sink, neck, heating block and nozzle into one unit. This design offers several advantages, including faster heat-up times compared to conventional hotends and a reduction in filament leakage or spillage at the interface between the nozzle and heat break. By integrating all components, the Bambu Lab hotend minimises the number of potential failure points and simplifies maintenance and assembly. Overall, this innovative design can provide a more efficient and reliable 3D printing experience. Bambu Lab offers hotends in two configurations: a single hotend with nozzle and a complete hotend assembly. The complete hotend assembly includes the hotend with nozzle, a fan, a ceramic heater, a thermistor and a silicone sock. It comes pre-assembled and ready to use with your Bambu Lab 3D printer. If you need to change your nozzle diameter, you can replace the hotend with the nozzle on your original complete hotend assembly or purchase a new complete hotend assembly. Please confirm your printer model before purchasing as the connections may differ between the X1 series version and the P1P version. Installation: With its robust and long service life, the complete hotend assembly can be easily installed and replaced.
Last updated at 09/03/2026 11:22:56
Stainless Steel Nozzle Assembly Hotend Kit Compatible for Bambu Lab P1S P1P X1C X1 Carbon 3D Printer(Hotend Kit-0.2mm)
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Bambu Lab Accessories Hotend with hardened steel nozzle - 0.8 mm For Printer X Series, P Series
7-day returns
Bambu Lab Hardened Nozzle Hotend for P1 S | Australian Stock 0.4 (Hotend Only)
Free delivery
Bambu Lab Nozzle for X1 and P1 Series 0.8mm Hardened Steel
Delivery between 7–11 Sept $12.70
Bambu Lab P1 Series Hotend Australia 0.8mm Hardened Steel / Hotend
Delivery $9.95
Bambu Hotend - P1 Series - 0.8mm Hardened Steel / Hotend
Delivery $50
Bambu Lab Hotend for P1S / X1C Australia | 3D BRO 0.2mm
Delivery between 7–10 Sept $9.70
Bambu Lab Hotend - X1C/P1S/P1P - 0.8mm Hardened Steel [FAH003-N-1]
Bambu Lab Hotend with Hardened Steel Nozzle 0.8mm P1S/P1P/X1C
Delivery by Mon $7.95
Bambu Lab Hotend w/ Stainless Steel Nozzle 0.2mm P1S/P1P/X1C
Delivery between 5–16 Sept $7.95
originally posted on technologyoutlet.co.uk
Pleasure to deal with as always easy ordering and fast delivery
originally posted on atome3d.com
Genuine part
originally posted on technologyoutlet.co.uk
Needed a hard steel nozzle for my X1E and Technology Outlet didn't disappoint
Stainless Steel Nozzle Assembly Hotend Kit Compatible for Bambu Lab P1S P1P X1C X1 Carbon 3D Printer(Hotend Kit-0.2mm)
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Bambu Lab Accessories Hotend with hardened steel nozzle - 0.8 mm For Printer X Series, P Series
7-day returns
Bambu Lab Hardened Nozzle Hotend for P1 S | Australian Stock 0.4 (Hotend Only)
Free delivery
Bambu Lab Nozzle for X1 and P1 Series 0.8mm Hardened Steel
Delivery between 7–11 Sept $12.70
Bambu Lab P1 Series Hotend Australia 0.8mm Hardened Steel / Hotend
Delivery $9.95
Pleasure to deal with as always easy ordering and fast delivery
Genuine part
Needed a hard steel nozzle for my X1E and Technology Outlet didn't disappoint
Seems to have been a good buy
Used it a few times wanted a 4mm harder steel nozzle did of have any in stock
Nice and easy swap that's all I can say !
Great performance, easy to install, great results much more detail.
Good service
au top
