METRIC (Coarse and Fine) Chrome Alloy Hand TapsAngle of thread is 60. The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimeters). Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
METRIC (Coarse and Fine) Chrome Alloy Hand TapsAngle of thread is 60. The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimeters). Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
METRIC (Coarse and Fine) Chrome Alloy Hand TapsAngle of thread is 60. The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimeters). Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
METRIC (Coarse and Fine) Chrome Alloy Hand TapsAngle of thread is 60. The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimeters). Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
| Diameter | 24 mm |
| Pitch | 3.0 mm |
| Lead | Intermediate |
| Overall Length | 124 mm |
| Tapping Drill | 21 mm |
| Diameter | 24 mm |
| Pitch | 3.0 mm |
| Lead | Intermediate |
| Overall Length | 124 mm |
| Tapping Drill | 21 mm |
