Features: Angle of thread is 60 degrees. ; The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well. ; Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. ; The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres). ; BOTTOMING TAPS have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole. ; Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap. ; Specifications:Diameter9 mmPitch1.25 mmLeadingBottomingOverall Length72 mmTapping Drill7.9 mm
Features: Angle of thread is 60 degrees. ; The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well. ; Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. ; The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres). ; BOTTOMING TAPS have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole. ; Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap. ; Specifications:Diameter9 mmPitch1.25 mmLeadingBottomingOverall Length72 mmTapping Drill7.9 mm
Features: Angle of thread is 60 degrees. ; The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well. ; Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. ; The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres). ; BOTTOMING TAPS have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole. ; Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap. ; Specifications:Diameter9 mmPitch1.25 mmLeadingBottomingOverall Length72 mmTapping Drill7.9 mm
Features: Angle of thread is 60 degrees. ; The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well. ; Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. ; The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres). ; BOTTOMING TAPS have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole. ; Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap. ; Specifications:Diameter9 mmPitch1.25 mmLeadingBottomingOverall Length72 mmTapping Drill7.9 mm
Last updated at 03/10/2026 23:44:20
Bordo - 7/8" x 14 BSPF Bottoming HSS Tap | 3046-7/8B
Delivery between 11–19 Mar $7.95
| Diameter (inch) | 7/8 |
| Pitch/TPI | 14 |
| Drill Size (mm) | 28.25 |
| Thread Form Type | BSPF (G Series) |
| Overall Length (OAL) mm | 102 |
Bordo - 7/8" x 14 BSPF Bottoming HSS Tap | 3046-7/8B
Delivery between 11–19 Mar $7.95
| Diameter (inch) | 7/8 |
| Pitch/TPI | 14 |
| Drill Size (mm) | 28.25 |
| Thread Form Type | BSPF (G Series) |
| Overall Length (OAL) mm | 102 |
