The GAM 220 MF Digital Angle Measurer provides automatic calculation of single and double mitre angles without any other tools. Rapid calculation and transfer of angles by means of memory function for frequently used angle dimensions. The main arm houses the digital display and horizontal and plumb levelling vials. The vials allow the angle measurement of variations from the vertical or the horizontal. It has a range of 0° to 220°. The digital read-out displays the angle with an accuracy of ±0.1°. The display automatically flips when using the GAM 220 MF upside-down. Simple push button controls offer an illuminated display when working in poorly lit areas and there is a hold function for cases where the display is difficult to see. There is a button for the built-in angle-cutting calculator. This function divides the measured angle to give the mitre angle for setting a mitre saw. It can also calculate the mitre and bevel cutting angles for compound cuts required when fitting cornices or crown mouldings. Operating the mechanical lock between the two arms allows you to transfer angles. The GAM 220 MF comes with a leg extension for measuring difficult-to-reach angles. It is IP54 protected against dust and splash water.
The GAM 220 MF Digital Angle Measurer provides automatic calculation of single and double mitre angles without any other tools. Rapid calculation and transfer of angles by means of memory function for frequently used angle dimensions. The main arm houses the digital display and horizontal and plumb levelling vials. The vials allow the angle measurement of variations from the vertical or the horizontal. It has a range of 0° to 220°. The digital read-out displays the angle with an accuracy of ±0.1°. The display automatically flips when using the GAM 220 MF upside-down. Simple push button controls offer an illuminated display when working in poorly lit areas and there is a hold function for cases where the display is difficult to see. There is a button for the built-in angle-cutting calculator. This function divides the measured angle to give the mitre angle for setting a mitre saw. It can also calculate the mitre and bevel cutting angles for compound cuts required when fitting cornices or crown mouldings. Operating the mechanical lock between the two arms allows you to transfer angles. The GAM 220 MF comes with a leg extension for measuring difficult-to-reach angles. It is IP54 protected against dust and splash water.
The GAM 220 MF Digital Angle Measurer provides automatic calculation of single and double mitre angles without any other tools. Rapid calculation and transfer of angles by means of memory function for frequently used angle dimensions. The main arm houses the digital display and horizontal and plumb levelling vials. The vials allow the angle measurement of variations from the vertical or the horizontal. It has a range of 0° to 220°. The digital read-out displays the angle with an accuracy of ±0.1°. The display automatically flips when using the GAM 220 MF upside-down. Simple push button controls offer an illuminated display when working in poorly lit areas and there is a hold function for cases where the display is difficult to see. There is a button for the built-in angle-cutting calculator. This function divides the measured angle to give the mitre angle for setting a mitre saw. It can also calculate the mitre and bevel cutting angles for compound cuts required when fitting cornices or crown mouldings. Operating the mechanical lock between the two arms allows you to transfer angles. The GAM 220 MF comes with a leg extension for measuring difficult-to-reach angles. It is IP54 protected against dust and splash water.
The GAM 220 MF Digital Angle Measurer provides automatic calculation of single and double mitre angles without any other tools. Rapid calculation and transfer of angles by means of memory function for frequently used angle dimensions. The main arm houses the digital display and horizontal and plumb levelling vials. The vials allow the angle measurement of variations from the vertical or the horizontal. It has a range of 0° to 220°. The digital read-out displays the angle with an accuracy of ±0.1°. The display automatically flips when using the GAM 220 MF upside-down. Simple push button controls offer an illuminated display when working in poorly lit areas and there is a hold function for cases where the display is difficult to see. There is a button for the built-in angle-cutting calculator. This function divides the measured angle to give the mitre angle for setting a mitre saw. It can also calculate the mitre and bevel cutting angles for compound cuts required when fitting cornices or crown mouldings. Operating the mechanical lock between the two arms allows you to transfer angles. The GAM 220 MF comes with a leg extension for measuring difficult-to-reach angles. It is IP54 protected against dust and splash water.
Last updated at 06/11/2026 20:00:30
Bosch Digital Angle Measurer Gam220mf 0601076600
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Bosch Gam 220 Mf Angle Measurer
Bosch Digital Angle Measurer GAM220MF Inclinometer With Illuminated Display IP54
Free delivery between 18–23 June
Bosch GAM 220MF (0.601.076.600) 400mm (15-3/4") Digital Angle Measurer
Free delivery between 18–26 June
Bosch GAM-220 Digital Angle Finder Angle Finder Miter Calculator Protractor Level Angle Tester Range
Free delivery
Digital goniometer gam 220 mf professional with 4 batteries (aa) and accessories set
Delivery $50.64
BOSCH GAM 220 MF 4-in-1 Digital Angle Finder, Includes Leg Extension, 4 AA Batteries,
Delivery between 18–24 June $14.22
Robert Bosch 0601076600 Unclassified
Delivery between Sat – Wed $56.89
BOSCH GAM 220 MF 4-in-1 Digital Angle Finder, Includes Leg Extension, 4 AA Batteries,
Delivery between 16–20 June $14.01
Robert Bosch 0601076600
Delivery between Fri – Wed $71.11
originally posted on howetools.co.uk
Not tried it out properly yet but did a quick test and it seems to be okVery good sturdy build and sits in hand comfortably
originally posted on howetools.co.uk
It’s expensive especially in comparison to the diy version from the same brand, but I am glad I paid up. Good slider which is packed separately in the excellent padded sleeve supplied to protect it. Seemingly very accurate, and though I can do the maths worth having a mitre angle readout. A bit heavier than I imagined it needs to be.
originally posted on howetools.co.uk
So far have used for a couple of jobs & should have had one years ago as it saves a lot of hassle. Great for making small adjustments & fine tuning. Cutters are good quality but should be at the price.
| Arm length (cm) | 40 |
| Measure of measurement, bubbles | ± 0,05° |
| Measurement precision, corner | ± 0,1° |
| Measuring range | 0 - 220° |
Bosch Digital Angle Measurer Gam220mf 0601076600
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Bosch Gam 220 Mf Angle Measurer
Bosch Digital Angle Measurer GAM220MF Inclinometer With Illuminated Display IP54
Free delivery between 18–23 June
Bosch GAM 220MF (0.601.076.600) 400mm (15-3/4") Digital Angle Measurer
Free delivery between 18–26 June
Bosch GAM-220 Digital Angle Finder Angle Finder Miter Calculator Protractor Level Angle Tester Range
Free delivery
Not tried it out properly yet but did a quick test and it seems to be okVery good sturdy build and sits in hand comfortably
It’s expensive especially in comparison to the diy version from the same brand, but I am glad I paid up. Good slider which is packed separately in the excellent padded sleeve supplied to protect it. Seemingly very accurate, and though I can do the maths worth having a mitre angle readout. A bit heavier than I imagined it needs to be.
So far have used for a couple of jobs & should have had one years ago as it saves a lot of hassle. Great for making small adjustments & fine tuning. Cutters are good quality but should be at the price.
Great! As you would expect from Bosch, does exactly what it should.
Another first class bit of kit from Bosch. Very easy to use and has a lot of very good features that make cutting mitres etc very simple and very accurate.
I have the older model of this tool. Works great every time. Bought it for measuring angle windows for blinds. Never let my down. Have used for crown molding +++ great tool. Do not let someone hard on tools borrowed this great little toy
Nice to see a very accurate angle grinder. Plus it was 80$ less than what I saw around.
Very robust, accurate and easy to use. It speeds up the process no end with the useful features for calculation/splitting angles. Transferring angles to get an average where required is also much easier with this. You can work without one, but having one makes the job quicker and easier.
Super appliance, finished the head for the installation of moldings on the ceiling, especially in the renovation or no angle is the same.
birthday present was rely appropriated great tool will be used every day as brought for a carpenter to make bespoke furniture.delivered in good time easy and very pleased.
| Arm length (cm) | 40 |
| Measure of measurement, bubbles | ± 0,05° |
| Measurement precision, corner | ± 0,1° |
| Measuring range | 0 - 220° |
