The famous Clipsal RCD (also known as ‘Safety Switch’) is an absolute must for every home. In fact, it is a legal requirement for all new homes in Australia to have RCD protection for all final sub-circuits. Why? Because in the case of faulty appliances or wiring, this little device in your switchboard will help to disconnect power and help to save your loved ones from a potentially fatal electric shock. Electrical cables can get extremely hot due to overload and short circuit and potentially damage your home due to electrical fires. To help protect cables from damage, you need to have MCB installed at the switchboard. Instead of having a separate MCB and RCD for each circuit, make the smart choice with Clipsal SLIM RCBO. This is a combo device that will provide RCD & MCB functions in 1 device and save valuable space in your switchboard. The complete MAX9 system is type tested to AS/NZS 61439- 3, so you don’t have to think twice about compliance to this standard if you use complete MAX9 system. All the RCDs and RCBOs in MAX9 range are Type A and hence future ready for the requirements of Amendment 2 to AS/NZS 3000:2018 (Known as ‘Wiring Rules’). Features and Benefits Top and bottom line and load compatible for ease of installation Short circuit breaking capacity of 6kA Rated at 240V, 30mA, type A, C-Curve Special Function (F) – 40ms Tripping Time One module width – ideal for retrofit installations where space is limited Two-pole safety feature allows switching of both Active and Neutral contacts Trip free locking device (lockable ‘ON’ or ‘OFF’ position) Compatible with Clipsal’s 4LD Lock Dog AS/NZS 61009 compliance Ideal for retrofit installations where pole space is a problem Small width allows a greater number of RCBOs to be installed in one enclosure