Feel the Rush of Ripjaws V As the latest addition to the classic Ripjaws family, Ripjaws V series is the newest DDR4 memory designed for maximum compatibility and cutting-edge performance with the latest Intel Core processors. Built with the finest components, tested under the most rigorous conditions, and offered in five color options, Ripjaws V is the perfect choice for building a new performance system or for a simple memory upgrade. Blazing Fast Transfer Speed Available in a wide range of frequency options from standard DDR4-2133MHz to a blistering DDR4-4000MHz, Ripjaws V lets you enjoy a faster computing experience for gaming, video & image editing, rendering, and data processing. Rigorously Tested for Compatibility and Reliability Each and every Ripjaws V DDR4 memory kit is tested with G.SKILL's rigorous validation process on all major performance motherboard brands to ensure the best-in-class reliability and compatibility across the widest selection of motherboards. Color It Up Not only is the Ripjaws V designed with a sleek new look, but also available in five different colors: Blazing Red, Steel Blue, Radiant Silver, Gunmetal Gray, and Classic Black. Whether you're a modder seeking matching hues or looking to build a stunning new system, Ripjaws V is a superb selection. 42mm Module Height Continuing the tradition of aftermarket CPU cooler compatibility, Ripjaws V is designed with a 42mm module height suitable for most oversized CPU heatsinks. Up to 128GB Ultra High Capacity Ripjaws V offers various capacity configurations, not only with modules of 4GB and 8GB, but also in ultra-high 16GB capacities for up to 128GB (16GBx8). The possibilities are endless! Power Efficient Designed with a low voltage of 1.2V~1.35V at DDR4 standard, this lowers the memory voltage requirement by 20% from DDR3 memory kits! Now your system can perform even faster without becoming an expensive appliance heater. XMP 2.0 Support Just set and go. Programmed with the latest Intel XMP 2.0 profiles, the only thing between you and extreme performance is a simple setting.
Feel the Rush of Ripjaws V As the latest addition to the classic Ripjaws family, Ripjaws V series is the newest DDR4 memory designed for maximum compatibility and cutting-edge performance with the latest Intel Core processors. Built with the finest components, tested under the most rigorous conditions, and offered in five color options, Ripjaws V is the perfect choice for building a new performance system or for a simple memory upgrade. Blazing Fast Transfer Speed Available in a wide range of frequency options from standard DDR4-2133MHz to a blistering DDR4-4000MHz, Ripjaws V lets you enjoy a faster computing experience for gaming, video & image editing, rendering, and data processing. Rigorously Tested for Compatibility and Reliability Each and every Ripjaws V DDR4 memory kit is tested with G.SKILL's rigorous validation process on all major performance motherboard brands to ensure the best-in-class reliability and compatibility across the widest selection of motherboards. Color It Up Not only is the Ripjaws V designed with a sleek new look, but also available in five different colors: Blazing Red, Steel Blue, Radiant Silver, Gunmetal Gray, and Classic Black. Whether you're a modder seeking matching hues or looking to build a stunning new system, Ripjaws V is a superb selection. 42mm Module Height Continuing the tradition of aftermarket CPU cooler compatibility, Ripjaws V is designed with a 42mm module height suitable for most oversized CPU heatsinks. Up to 128GB Ultra High Capacity Ripjaws V offers various capacity configurations, not only with modules of 4GB and 8GB, but also in ultra-high 16GB capacities for up to 128GB (16GBx8). The possibilities are endless! Power Efficient Designed with a low voltage of 1.2V~1.35V at DDR4 standard, this lowers the memory voltage requirement by 20% from DDR3 memory kits! Now your system can perform even faster without becoming an expensive appliance heater. XMP 2.0 Support Just set and go. Programmed with the latest Intel XMP 2.0 profiles, the only thing between you and extreme performance is a simple setting.
Feel the Rush of Ripjaws V As the latest addition to the classic Ripjaws family, Ripjaws V series is the newest DDR4 memory designed for maximum compatibility and cutting-edge performance with the latest Intel Core processors. Built with the finest components, tested under the most rigorous conditions, and offered in five color options, Ripjaws V is the perfect choice for building a new performance system or for a simple memory upgrade. Blazing Fast Transfer Speed Available in a wide range of frequency options from standard DDR4-2133MHz to a blistering DDR4-4000MHz, Ripjaws V lets you enjoy a faster computing experience for gaming, video & image editing, rendering, and data processing. Rigorously Tested for Compatibility and Reliability Each and every Ripjaws V DDR4 memory kit is tested with G.SKILL's rigorous validation process on all major performance motherboard brands to ensure the best-in-class reliability and compatibility across the widest selection of motherboards. Color It Up Not only is the Ripjaws V designed with a sleek new look, but also available in five different colors: Blazing Red, Steel Blue, Radiant Silver, Gunmetal Gray, and Classic Black. Whether you're a modder seeking matching hues or looking to build a stunning new system, Ripjaws V is a superb selection. 42mm Module Height Continuing the tradition of aftermarket CPU cooler compatibility, Ripjaws V is designed with a 42mm module height suitable for most oversized CPU heatsinks. Up to 128GB Ultra High Capacity Ripjaws V offers various capacity configurations, not only with modules of 4GB and 8GB, but also in ultra-high 16GB capacities for up to 128GB (16GBx8). The possibilities are endless! Power Efficient Designed with a low voltage of 1.2V~1.35V at DDR4 standard, this lowers the memory voltage requirement by 20% from DDR3 memory kits! Now your system can perform even faster without becoming an expensive appliance heater. XMP 2.0 Support Just set and go. Programmed with the latest Intel XMP 2.0 profiles, the only thing between you and extreme performance is a simple setting.
Feel the Rush of Ripjaws V As the latest addition to the classic Ripjaws family, Ripjaws V series is the newest DDR4 memory designed for maximum compatibility and cutting-edge performance with the latest Intel Core processors. Built with the finest components, tested under the most rigorous conditions, and offered in five color options, Ripjaws V is the perfect choice for building a new performance system or for a simple memory upgrade. Blazing Fast Transfer Speed Available in a wide range of frequency options from standard DDR4-2133MHz to a blistering DDR4-4000MHz, Ripjaws V lets you enjoy a faster computing experience for gaming, video & image editing, rendering, and data processing. Rigorously Tested for Compatibility and Reliability Each and every Ripjaws V DDR4 memory kit is tested with G.SKILL's rigorous validation process on all major performance motherboard brands to ensure the best-in-class reliability and compatibility across the widest selection of motherboards. Color It Up Not only is the Ripjaws V designed with a sleek new look, but also available in five different colors: Blazing Red, Steel Blue, Radiant Silver, Gunmetal Gray, and Classic Black. Whether you're a modder seeking matching hues or looking to build a stunning new system, Ripjaws V is a superb selection. 42mm Module Height Continuing the tradition of aftermarket CPU cooler compatibility, Ripjaws V is designed with a 42mm module height suitable for most oversized CPU heatsinks. Up to 128GB Ultra High Capacity Ripjaws V offers various capacity configurations, not only with modules of 4GB and 8GB, but also in ultra-high 16GB capacities for up to 128GB (16GBx8). The possibilities are endless! Power Efficient Designed with a low voltage of 1.2V~1.35V at DDR4 standard, this lowers the memory voltage requirement by 20% from DDR3 memory kits! Now your system can perform even faster without becoming an expensive appliance heater. XMP 2.0 Support Just set and go. Programmed with the latest Intel XMP 2.0 profiles, the only thing between you and extreme performance is a simple setting.
Last updated at 02/16/2025 02:31:27
originally posted on neweggbusiness.com
RAM is probably the easiest thing to upgrade in any system - but I'm going to advise you to buy the RAM you need up front - here is why: There are 3 main manufacturers of RAM (the actual chips soldered to the RAM module). There are manufacturing differences between the 3, which means performance variation. The way RAM controllers work, you will only achieve the best performance of your worst module. The way RAM errors manifest - you will experience anything from intermittent computer crashes to complete inability to post. Matched kits ensure that the actual RAM chips soldered to the module are from a single manufacturer - and everything is tested for compatibility. You're virtually guaranteed to get memory that works as rated, from any manufacturer. But if you buy ... MoreRAM is probably the easiest thing to upgrade in any system - but I'm going to advise you to buy the RAM you need up front - here is why: There are 3 main manufacturers of RAM (the actual chips soldered to the RAM module). There are manufacturing differences between the 3, which means performance variation. The way RAM controllers work, you will only achieve the best performance of your worst module. The way RAM errors manifest - you will experience anything from intermittent computer crashes to complete inability to post. Matched kits ensure that the actual RAM chips soldered to the module are from a single manufacturer - and everything is tested for compatibility. You're virtually guaranteed to get memory that works as rated, from any manufacturer. But if you buy an 8 GB module today with the intent of adding another 8 GB in 6 months, you don't get that same assurance - even if you order the same SKU again - manufacturing revisions are rarely advertised and are not readily apparent to customers in most cases (not just with memory). Here is how to buy RAM: 1) Make sure it will fit in your system - low profile RAM exists for a reason 2) Buy the capacity, frequency, & CAS you need and want up-front 3) Deals happen around memory frequency, more than capacity - example: you will find 3200+ speed priced in the 2400-ish speed range, at times 4) Don't overbuy on Frequency or CAS - extra capacity can be justified as adding to the projected life of a system - Frequency & CAS might add a couple FPS today, but long-term won't mean much 5) Remember aesthetic frills, like RGB lighting, don't improve your gaming or content creation experience 6) Yes, you can overclock memory - don't expect to get significantly more performance than you paid for Boiled down - know the specs you need, buy RAM with those specs.
originally posted on newegg.com
I want to like this memory kit, but I can't recommend it based on my current experience. I bought the 16GB 3600 to better sync with my Ryzen 3600x CPU, and it appeared at first like it was worth it; after installing the new RAM, booting to the BIOS and changing the speed profile to the D.O.C.P. of 18-22-22-42 and speed of 3600, I restarted and booted into Windows. Upon checking the Windows tools, I saw that I was indeed getting the speed advertised, which was great! Then the problems started. After starting up some programs, I started to notice crashes. Sometimes it would just be a single program, sometimes it would be the entire OS and I would get a blue screen and automatic reboot. I went back to the BIOS, checked my clock speeds were correct, shut down everything ... MoreI want to like this memory kit, but I can't recommend it based on my current experience. I bought the 16GB 3600 to better sync with my Ryzen 3600x CPU, and it appeared at first like it was worth it; after installing the new RAM, booting to the BIOS and changing the speed profile to the D.O.C.P. of 18-22-22-42 and speed of 3600, I restarted and booted into Windows. Upon checking the Windows tools, I saw that I was indeed getting the speed advertised, which was great! Then the problems started. After starting up some programs, I started to notice crashes. Sometimes it would just be a single program, sometimes it would be the entire OS and I would get a blue screen and automatic reboot. I went back to the BIOS, checked my clock speeds were correct, shut down everything and reseated the RAM to make sure it was all correct on the hardware side, then tried again. More crashes. So I went back into the BIOS a third time and removed the D.O.C.P., set everything back to Auto, went back to the default clock speeds and rebooted. Reboot successful, and no crashes from then on. But I was only getting a clock speed of 2133 instead of 3600, because that's apparently the default for DDR4. I ran Windows' Memory Diagnostic to make sure, and sure enough there were hardware issues detected. Just to make sure, I shut everything down again, uninstalled the new RAM and reinstalled my old RAM, and my system booted and is running right now (it's how I'm writing this review in fact) without crashing or any memory errors detected. So like I said at the top, I want to like this memory kit, but I cannot get it to run at a 3600 speed without crashes occurring. It appears that the kit I have is defective and can't run at 3600, since I believe that I eliminated every other potential factor for the issue. My relevant system specs are below if that's helpful to someone else browsing here; (this memory kit is on the QVL for my motherboard, so I know that's not the issue.) Motherboard: ASUS TUF-Gaming B550M-Plus CPU: Ryzen 5 3600x RAM: (well, that's what this is about, isn't is?)
originally posted on neweggbusiness.com
I bought this kit primarily to have 32GB of memory because outside of gaming I occasionally work from home and all of my work tools alone use nearly 9GB just to be open. Meanwhile, all of the extra bits of software on my home PC (Corsair Icue, Razer Synapse, etc.) float around 4.5GB idle. Almost maxing out my memory when working didn't sit well with me. An unintended consequence was having mismatched but at the same time somehow matching RAM modules. When I first built my rig back in Dec 2020/Jan 2021 I grabbed a kit Ripjaws V memory to start with. They looked more gun metal grey to me than they did black. Went back and looked at my order history and turns out they are in fact a grey color, something I missed when making the initial purchase. This time I bought the ... MoreI bought this kit primarily to have 32GB of memory because outside of gaming I occasionally work from home and all of my work tools alone use nearly 9GB just to be open. Meanwhile, all of the extra bits of software on my home PC (Corsair Icue, Razer Synapse, etc.) float around 4.5GB idle. Almost maxing out my memory when working didn't sit well with me. An unintended consequence was having mismatched but at the same time somehow matching RAM modules. When I first built my rig back in Dec 2020/Jan 2021 I grabbed a kit Ripjaws V memory to start with. They looked more gun metal grey to me than they did black. Went back and looked at my order history and turns out they are in fact a grey color, something I missed when making the initial purchase. This time I bought the black ones. The neat thing out of the purchase is the alternating DIMM slots on my motherboard are black and grey with the grey being the first two slots to populate. Overall I would recommend these to anyone who has a tighter budget trying to build a new machine. They may be priced a bit higher than some other brands but they look better and more importantly, just as an opinion again, I wouldn't recommend some of these other brands just yet as I don't feel they have been around long enough to warrant absolute trust in them.
| General | |
| Capacity | 16 GB: 2 x 8 GB |
| Upgrade Type | Generic |
| Height | 42 mm |
| Memory |
RAM is probably the easiest thing to upgrade in any system - but I'm going to advise you to buy the RAM you need up front - here is why: There are 3 main manufacturers of RAM (the actual chips soldered to the RAM module). There are manufacturing differences between the 3, which means performance variation. The way RAM controllers work, you will only achieve the best performance of your worst module. The way RAM errors manifest - you will experience anything from intermittent computer crashes to complete inability to post. Matched kits ensure that the actual RAM chips soldered to the module are from a single manufacturer - and everything is tested for compatibility. You're virtually guaranteed to get memory that works as rated, from any manufacturer. But if you buy ... MoreRAM is probably the easiest thing to upgrade in any system - but I'm going to advise you to buy the RAM you need up front - here is why: There are 3 main manufacturers of RAM (the actual chips soldered to the RAM module). There are manufacturing differences between the 3, which means performance variation. The way RAM controllers work, you will only achieve the best performance of your worst module. The way RAM errors manifest - you will experience anything from intermittent computer crashes to complete inability to post. Matched kits ensure that the actual RAM chips soldered to the module are from a single manufacturer - and everything is tested for compatibility. You're virtually guaranteed to get memory that works as rated, from any manufacturer. But if you buy an 8 GB module today with the intent of adding another 8 GB in 6 months, you don't get that same assurance - even if you order the same SKU again - manufacturing revisions are rarely advertised and are not readily apparent to customers in most cases (not just with memory). Here is how to buy RAM: 1) Make sure it will fit in your system - low profile RAM exists for a reason 2) Buy the capacity, frequency, & CAS you need and want up-front 3) Deals happen around memory frequency, more than capacity - example: you will find 3200+ speed priced in the 2400-ish speed range, at times 4) Don't overbuy on Frequency or CAS - extra capacity can be justified as adding to the projected life of a system - Frequency & CAS might add a couple FPS today, but long-term won't mean much 5) Remember aesthetic frills, like RGB lighting, don't improve your gaming or content creation experience 6) Yes, you can overclock memory - don't expect to get significantly more performance than you paid for Boiled down - know the specs you need, buy RAM with those specs.
I want to like this memory kit, but I can't recommend it based on my current experience. I bought the 16GB 3600 to better sync with my Ryzen 3600x CPU, and it appeared at first like it was worth it; after installing the new RAM, booting to the BIOS and changing the speed profile to the D.O.C.P. of 18-22-22-42 and speed of 3600, I restarted and booted into Windows. Upon checking the Windows tools, I saw that I was indeed getting the speed advertised, which was great! Then the problems started. After starting up some programs, I started to notice crashes. Sometimes it would just be a single program, sometimes it would be the entire OS and I would get a blue screen and automatic reboot. I went back to the BIOS, checked my clock speeds were correct, shut down everything ... MoreI want to like this memory kit, but I can't recommend it based on my current experience. I bought the 16GB 3600 to better sync with my Ryzen 3600x CPU, and it appeared at first like it was worth it; after installing the new RAM, booting to the BIOS and changing the speed profile to the D.O.C.P. of 18-22-22-42 and speed of 3600, I restarted and booted into Windows. Upon checking the Windows tools, I saw that I was indeed getting the speed advertised, which was great! Then the problems started. After starting up some programs, I started to notice crashes. Sometimes it would just be a single program, sometimes it would be the entire OS and I would get a blue screen and automatic reboot. I went back to the BIOS, checked my clock speeds were correct, shut down everything and reseated the RAM to make sure it was all correct on the hardware side, then tried again. More crashes. So I went back into the BIOS a third time and removed the D.O.C.P., set everything back to Auto, went back to the default clock speeds and rebooted. Reboot successful, and no crashes from then on. But I was only getting a clock speed of 2133 instead of 3600, because that's apparently the default for DDR4. I ran Windows' Memory Diagnostic to make sure, and sure enough there were hardware issues detected. Just to make sure, I shut everything down again, uninstalled the new RAM and reinstalled my old RAM, and my system booted and is running right now (it's how I'm writing this review in fact) without crashing or any memory errors detected. So like I said at the top, I want to like this memory kit, but I cannot get it to run at a 3600 speed without crashes occurring. It appears that the kit I have is defective and can't run at 3600, since I believe that I eliminated every other potential factor for the issue. My relevant system specs are below if that's helpful to someone else browsing here; (this memory kit is on the QVL for my motherboard, so I know that's not the issue.) Motherboard: ASUS TUF-Gaming B550M-Plus CPU: Ryzen 5 3600x RAM: (well, that's what this is about, isn't is?)
I bought this kit primarily to have 32GB of memory because outside of gaming I occasionally work from home and all of my work tools alone use nearly 9GB just to be open. Meanwhile, all of the extra bits of software on my home PC (Corsair Icue, Razer Synapse, etc.) float around 4.5GB idle. Almost maxing out my memory when working didn't sit well with me. An unintended consequence was having mismatched but at the same time somehow matching RAM modules. When I first built my rig back in Dec 2020/Jan 2021 I grabbed a kit Ripjaws V memory to start with. They looked more gun metal grey to me than they did black. Went back and looked at my order history and turns out they are in fact a grey color, something I missed when making the initial purchase. This time I bought the ... MoreI bought this kit primarily to have 32GB of memory because outside of gaming I occasionally work from home and all of my work tools alone use nearly 9GB just to be open. Meanwhile, all of the extra bits of software on my home PC (Corsair Icue, Razer Synapse, etc.) float around 4.5GB idle. Almost maxing out my memory when working didn't sit well with me. An unintended consequence was having mismatched but at the same time somehow matching RAM modules. When I first built my rig back in Dec 2020/Jan 2021 I grabbed a kit Ripjaws V memory to start with. They looked more gun metal grey to me than they did black. Went back and looked at my order history and turns out they are in fact a grey color, something I missed when making the initial purchase. This time I bought the black ones. The neat thing out of the purchase is the alternating DIMM slots on my motherboard are black and grey with the grey being the first two slots to populate. Overall I would recommend these to anyone who has a tighter budget trying to build a new machine. They may be priced a bit higher than some other brands but they look better and more importantly, just as an opinion again, I wouldn't recommend some of these other brands just yet as I don't feel they have been around long enough to warrant absolute trust in them.
Memory worked as advertised, and was extremely forgiving when pushing timings and subtimings. The new ryzen cpus are limited by the infinity fabric, and anything out of 1:1:1 sync suffers terribly in a variety of metrics. Knowing this ahead of time, I was really looking to buy a better kit so I could try and achieve CL14 at 3800mhz 1:1:1. There isn't a good guide on how to set the timings and subtimings for CL14 @ 3800mhz so it took some research trial and error, many bios resets, and a lot of patience but I believe I was able to squeeze almost everything out of this spectacular kit. I had to bump my kit up to 1.48v in bios to get CL14 to stick, otherwise I had to reset the bios due to memory failure at bootup. I would recommend this product to anyone running a 3xxx ... MoreMemory worked as advertised, and was extremely forgiving when pushing timings and subtimings. The new ryzen cpus are limited by the infinity fabric, and anything out of 1:1:1 sync suffers terribly in a variety of metrics. Knowing this ahead of time, I was really looking to buy a better kit so I could try and achieve CL14 at 3800mhz 1:1:1. There isn't a good guide on how to set the timings and subtimings for CL14 @ 3800mhz so it took some research trial and error, many bios resets, and a lot of patience but I believe I was able to squeeze almost everything out of this spectacular kit. I had to bump my kit up to 1.48v in bios to get CL14 to stick, otherwise I had to reset the bios due to memory failure at bootup. I would recommend this product to anyone running a 3xxx or 5xxx series AMD ryzen cpu if you want the most possible performance available today on the platform. Not sure how this kit performs on Intel so best of luck to you. I'm adding a screen cap of the Zen Timings for prospective buyers if you want to try your kit at CL14 3800mhz. I've manually adjusted almost every subtiming available to further improve performance. Unless dropping to a preposterous CL12, it doesn't get much better for new ryzen cpus.
I was having issues with my previous RAM not by this brand. I bought this set of 4x8 since my research showed improvement with four sticks over two sticks. When I first went and installed the sticks I just inserted all the sticks in serial number order from lowest to highest (left to right). Powering on my computer put me into a constant power cycle until the bios posted in safe mode. I was able to post without DOCP enabled. Tried to boot with DOCP enabled and it threw me into the power cycles again. I then cleared CMOS and tried again. This time it did not post or power cycle, but was stuck on the DRAM light indicating a memory issue. I took out the stick and put two of them in A2/B2 and it posted just fine with DOCP enabled. I then put in all stick pairing the ... MoreI was having issues with my previous RAM not by this brand. I bought this set of 4x8 since my research showed improvement with four sticks over two sticks. When I first went and installed the sticks I just inserted all the sticks in serial number order from lowest to highest (left to right). Powering on my computer put me into a constant power cycle until the bios posted in safe mode. I was able to post without DOCP enabled. Tried to boot with DOCP enabled and it threw me into the power cycles again. I then cleared CMOS and tried again. This time it did not post or power cycle, but was stuck on the DRAM light indicating a memory issue. I took out the stick and put two of them in A2/B2 and it posted just fine with DOCP enabled. I then put in all stick pairing the earlier serial numbers in A1/B1 and later serial numbers in A2/B2. This posted with DOCP enabled. I then ran memtest for 4 passes and everything passed without errors. I no longer have booting issues. I imagine if you have issues, start with posting with two stick in A2/B2 then trying with all four sticks afterwards. Clearing CMOS if necessary.
My set up: MB: Asrock B450M Pro4 CPU: Ryzen 5 3600 (65W TDP) SSD: ADATA XPG SX8100 M.2 PCIe NVME SSD (.33W active) Video Card: MSI GT710 ( Less than 20W ) PSU: Fatality Gaming 550W (An overkill for this system) and of course this pair of G.Skill Ripjaws V 8GBx2 SDRAM add to a total of 16GB RAM for my Linux workstation setup. During the initial set up phase, I didn't try any overclocking as usual, only turn on the XMP2.0 profile in MB which set the memory frequency to 3200 Mhz. Loaded the Linux Kernel 4.15.0.54, everything worked just fine. As soon as upgraded to Kernel 4.15.0.70, the system started to behave with a number of hiccups. The most annoying one is when I power down the computer, the fans are still running until I manually turn off the computer. After a ... MoreMy set up: MB: Asrock B450M Pro4 CPU: Ryzen 5 3600 (65W TDP) SSD: ADATA XPG SX8100 M.2 PCIe NVME SSD (.33W active) Video Card: MSI GT710 ( Less than 20W ) PSU: Fatality Gaming 550W (An overkill for this system) and of course this pair of G.Skill Ripjaws V 8GBx2 SDRAM add to a total of 16GB RAM for my Linux workstation setup. During the initial set up phase, I didn't try any overclocking as usual, only turn on the XMP2.0 profile in MB which set the memory frequency to 3200 Mhz. Loaded the Linux Kernel 4.15.0.54, everything worked just fine. As soon as upgraded to Kernel 4.15.0.70, the system started to behave with a number of hiccups. The most annoying one is when I power down the computer, the fans are still running until I manually turn off the computer. After a couple of days of troubleshooting ruled out all of the potential software causes, I then started to look into each of the hardware components. What a surprise! The memory test shows errors in a number of tests. What? no overclocking, auto adjusted voltages pumps 1.35V to the SDRAMs, running at the advertised 3200 frequency rate, gives errors? As soon as I reduce the clock to 3133Mhz, all of memory test errors are gone! In my twenty years of building and testing hundreds of computers. This is the first time I have had such experience. Typically, RAM are advertised conservatively with a lot of head rooms because there are many potential reasons could impair their actual performance. If one is lucky, such as the system I build a couple of weeks ago. I was able to overclock a 2666Mhz rated RAM to 3200Mhz without increasing the voltage. I would not complain if I was able to run at the nominal 3200Mhz and see no memory test errors. However, if there is 1 Mhz lower than what's advertised, then I would still not complain. But 67Mhz, which is 2% lower than advertised speed. Then I'd definitely voice my opinions. While other SDRAMs give a lot of head rooms, this SDRAM can' t hold the advertised frquency. That means, the quality of this pair SDRAM is lower than many SDRAMs I have used before. I could be the lucky one of receiving this bad pair. Well, originally, I planned to return this item. I managed to placed this pair of SDRAM in another system which reached the advertised 3200Mhz without showing errors. I used a different set of SDRAM of another brand in this system to reach a better clock rate at 3333Mhz. Thus, I decided to cancel the return request in order to meet the project deadlines. Anyway, my experience stands and just like to share my experience here. To be fair, I give it three eggs as a neutal score, instead of 1 egg I gave to it at first.
Running these guys at 3733 @ XMP timings no problem. Ryzen 3600 on MSI B450 Tomahawk. I'm giving them 1.375v but I'm not sure they even need the voltage bump to do it. Been busy enjoying them after initially verifying stability at this speed which is essentially the sweet spot for Ryzen performance. Memtest using test 5 and 8 - 10 passes stable and loving it. I will eventually try bringing the secondary timings to 16 from 19 but for now I'm really digging the performance for the price. Why waste money on b-die? 32gb capacity in a near b-die specced kit @ this price WOWSA this kit somehow gets you everything for less money by far RYZEN 3000 USERS HAVING TROUBLE WITH XMP - NOT ALL BOARDS WILL CORRECTLY AUTO ADJUST VOLTAGE WITH XMP SO MANUALLY SET vDIMM/MEMORY VOLTAGE ... MoreRunning these guys at 3733 @ XMP timings no problem. Ryzen 3600 on MSI B450 Tomahawk. I'm giving them 1.375v but I'm not sure they even need the voltage bump to do it. Been busy enjoying them after initially verifying stability at this speed which is essentially the sweet spot for Ryzen performance. Memtest using test 5 and 8 - 10 passes stable and loving it. I will eventually try bringing the secondary timings to 16 from 19 but for now I'm really digging the performance for the price. Why waste money on b-die? 32gb capacity in a near b-die specced kit @ this price WOWSA this kit somehow gets you everything for less money by far RYZEN 3000 USERS HAVING TROUBLE WITH XMP - NOT ALL BOARDS WILL CORRECTLY AUTO ADJUST VOLTAGE WITH XMP SO MANUALLY SET vDIMM/MEMORY VOLTAGE TO 1.35v-1.4v WHEN YOU ENABLE XMP (before saving and rebooting) RYZEN 2000 and 1000 series users!! YOUR CPU CANNOT SUPPORT MEMORY SPEED OF 3600mhz! This is not this or any other kit's fault, nor your motherboard's, but is a limitation of the cpu's OMC -> those older cpus have less capable onboard memory controllers preventing them from getting memory frequency much above 3000-3200mhz. This is still a great kit for you to get that you can run at higher speeds when you upgrade to Ryzen 3000. Almost all boards will allow you to set XMP and then manually set your memory frequency to what will be stable with Ryzen 1000/2000 cpus (3000mhz is pretty reliably stable on those cpus without tinkering) This way you do not have to mess with timings just to achieve stability. You can of course achieve even tighter timings and slightly higher speeds (3200mhz+) if you are an experienced overclocker. TLDR- TO REACH 3600mhz @ XMP SETTINGS YOU NEED TO BE RUNNING RYZEN 3000 SERIES CPU OR RECENT GEN INTEL. IF RYZEN 2000/1000 SERIES - YOUR CPU LIMITS YOUR MEMORY SPEED - SET XMP TO ENABLE, VDIMM VOLTAGE TO 1.3v AND LOWER FREQ TO 3000MHZ AND ENJOY TILL YOU UPGRADE CPU
UPDATE: I got this RAM. Today's price is now the same and no sale. The date on the sticks' labels were August 2021. I did some pre-install benchmark and stability tests. I found I did have issues with AVX-512 instructions in OCCT causing a couple cores to error, and Prime95 small fft just rebooting the system. I restored some bios defaults, then was stable. The problem was some overclock I had done that seemed to allow unlimited Watts. So my setup can cool up to ~200W hitting 100C. I was seeing an immediate spike to 250W and hitting thermal limits. I installed these two additional sticks in the remaining slots for a total of four. I applied DOCP profile, and set SOC 1.1V. I booted fine usually. Once I got a safe mode boot from the BIOS and had to reapply DOCP. As ... MoreUPDATE: I got this RAM. Today's price is now the same and no sale. The date on the sticks' labels were August 2021. I did some pre-install benchmark and stability tests. I found I did have issues with AVX-512 instructions in OCCT causing a couple cores to error, and Prime95 small fft just rebooting the system. I restored some bios defaults, then was stable. The problem was some overclock I had done that seemed to allow unlimited Watts. So my setup can cool up to ~200W hitting 100C. I was seeing an immediate spike to 250W and hitting thermal limits. I installed these two additional sticks in the remaining slots for a total of four. I applied DOCP profile, and set SOC 1.1V. I booted fine usually. Once I got a safe mode boot from the BIOS and had to reapply DOCP. As long as I was able to boot to my OS for stability tests everything is stable. I upgraded my bios from 2802 to 4021. The 4021 BIOS for some reason enables CSM mode stating my VGA is not supported in UEFI mode. (I have 1x1070 and 1xr9 290 installed). I'm not sure which card is unsupported, but it's a new complaint from the BIOS I haven't seen before. I enabled DOCP and stress tested fine. Next, I enabled PBO and still stress tested fine. I think CSM enabled mode increases boot time and so many people turn it off unless they need it. I verified secure boot still works so this is acceptable to me. I stress test with Prime95 small, OCCT small extreme steady, TestMem5 with Extreme1 @anta777, and CB20. CB20 score is 7240, and is about +120 better than PBO disabled. OCCT benchmark scores are 61.6/782/124.6/1437. I think limits reached are PPT 186W, TDC 130A, EDC 160A. I'm on an XSPC Rasa waterblock from 2011, rx360 v1 rad, Asus tuf x570 gaming (wi-fi), r9 3900x. Ram tuning is next. I really hesitate to try any higher frequency than 3600. I was able to boot 3733 on two sticks. I think I'll just try to tighten things up at 3600. I'd like to be able to cool a bit better. I know a bit of thermodynamics and I think the only way to do much improvement would be to lower the temperature of the waterblock fins and coolant. Radiator reviewers' tests show raising flow rates has little impact and I've noticed that as well. I guess what I'm saying is I'd like to be able to soak 250W instantaneous from the CPU without hitting a thermal limit and I'm not sure how a waterblock needs to be fixed to do that. I suspect maybe a very thin wall or better thermal conductivity- eg more surface area to the water and less distance to heat source. Oh, I need to find a better benchmark than CB20 anyway. Something that measures work done per time. Because you can throw 142W or 180W at CB20 and not see much difference. But if you throw 180W at a more appropriate workload like AVX, you would see gains, I'm thinking. Anyway, strong ram IMO.
I originally have 32Gb of Corsair RGB Vengences 3200Mhz installed on my system and quickly start running out of memory with the number of VM and Docker images running at the same time. When I had 2 Corsair RGB 3200Mhz kits installed on my system I couldn't even post if I had XMP 2.0 profile enabled. The fastest stable speed was 3066 Mhz with 1.42V with both Corsair kits installed. I decided to return one of the kit but ultimately realize I need more RAM to support my daily workflow. I took a chance with G.Skill 64Gb 3600Mhz and really just looking to get more capacity into my system. As soon as the kit arrived, I ran the system with the kit installed on B2/A2 slot and it booted up right away. I enabled the XMP 2.0 profile in the BIOS, restart and the computer and it ... MoreI originally have 32Gb of Corsair RGB Vengences 3200Mhz installed on my system and quickly start running out of memory with the number of VM and Docker images running at the same time. When I had 2 Corsair RGB 3200Mhz kits installed on my system I couldn't even post if I had XMP 2.0 profile enabled. The fastest stable speed was 3066 Mhz with 1.42V with both Corsair kits installed. I decided to return one of the kit but ultimately realize I need more RAM to support my daily workflow. I took a chance with G.Skill 64Gb 3600Mhz and really just looking to get more capacity into my system. As soon as the kit arrived, I ran the system with the kit installed on B2/A2 slot and it booted up right away. I enabled the XMP 2.0 profile in the BIOS, restart and the computer and it is running at 3600Mhz without any problem. I had a lot of doubts so I ran MemTest86 from USB and ran the test overnight and it found absolutely 0 errors. I was impressed. I then decided to leave the 64Gb on A2/B2 and inserted Corsair RGB 32Gb back into the system and pretty much don't expect much except it might be able to run with both kit installed at maybe around 3000Mhz. Boy was I surprised. I was able to run this kit at 3200Mhz with all 96Gb installed in the system at 1.4V and I ran MemTest86 from USB overnight with 0 error. The result is better than if I had 2 Corsair RGB vengence kit installed at the same time. The compatibility of this kit is amazing. If I need to, I would not hesitate to buy this kit again.
| General | |
| Capacity | 16 GB: 2 x 8 GB |
| Upgrade Type | Generic |
| Height | 42 mm |
| Memory |
