This stand is so convenient for quick setups. I have only one issue, the base is wide enough that it is hard to get through smaller doors. I understand that the width of the wheels are to provide stability wall moving. I don’t have a good solution. I just know it’s hard to get through some of the smaller doors.

I bought the table saw on sale online and then bought this separately when it went on sale. Saved a lot of money rather than buying it together. This stand works great. Heavy duty but not heavy in weight. Would highly recommend for DeWalt table saws.

I originally bought the Dewalt 7485 table saw bundle that includes a basic stand and guess what? it didn't fit the Dewalt 7485 (the bolts do not line up/fit.) I ended up getting this stand instead and it is AWESOME. Folds easily & sets up in seconds. It was a pain to set up with the saw (needed a person to help me lift it upside down) but otherwise this is the right stand for the job.

The assembly instructions were a little sketchy but no worries, there are lot of good You Tube videos out there to assist, and overall it was easy to put together. Once fully assembled the table is very stable, folds up easily and takes up very little storage with the table saw attached. The wheels allow it to be moved around with very little effort even over rough or uneven terrain. I couldn’t be happier with it and it completes the portable table saw ensemble. I would purchase it again!

This is my third stand. They are of pretty good quality but I have it tied down in my trailer and the frame seems to always get bent from the constant jarring. Probably not the stands fault but there is a couple weak spots. It does make it easier to transport the table saw. Be aware that not all Dewalt table saws fit on this stand. They do have an adaptor in the box that fits the majority though.

DeWalt Table Saw Stand - Great Stand

I purchased this saw stand for my Sawstop CTS. The assembly went fairly quicky. The instructions wernt that great, but the hardware bags are labeled for each step so with a little bit of common sense it goes together pretty fast. You will need a 1/2 inch socket, they supply an allen wrench for the bolt heads. It also comes with a bunch of mounting bolts to use with different dewalt table saws. The saw i put on here is 68 lbs, the legs seem plenty sturdy when tipping it off the wheels onto the legs. When upright it is very sturdy, and the wheels easily go over the bumps on the ramp up to my trailer. To get my sawstop mounted on it, I used the mounting holes already in the frame to bolt a piece of 3/4 plywood to it, then bolted my saw to the plywood I like how theres ... MoreI purchased this saw stand for my Sawstop CTS. The assembly went fairly quicky. The instructions wernt that great, but the hardware bags are labeled for each step so with a little bit of common sense it goes together pretty fast. You will need a 1/2 inch socket, they supply an allen wrench for the bolt heads. It also comes with a bunch of mounting bolts to use with different dewalt table saws. The saw i put on here is 68 lbs, the legs seem plenty sturdy when tipping it off the wheels onto the legs. When upright it is very sturdy, and the wheels easily go over the bumps on the ramp up to my trailer. To get my sawstop mounted on it, I used the mounting holes already in the frame to bolt a piece of 3/4 plywood to it, then bolted my saw to the plywood I like how theres less moving pieces than a gravity type stand.

Great product, easy to roll and easy to lift. It...

Great product, easy to roll and easy to lift. It supports power tools safely and securely. I have one of these stands under a Dewalt DWE7491RS job site circular saw and have no complaints. This one is being used to support a custom-built router table and I anticipate no problems with this application either. Highly recommended!

I should have ordered this long ago.

I only had to basic stand that came with my DeWalt 745 table saw. I didn't think I needed the rolling stand. After waiting too long, I finally pulled the trigger and am I ever glad I did. It was delivered quickly, was easy to assemble and has improved my small shop dramatically. It folds up perfectly to conserve space in my small shop, is easy to move around (if needed) and is the perfect height to work (unlike the generic stand I had which was uncomfortable on the lower back). I wish I had purchased this much, much sooner. I can't recommend this rolling stand enough, especially if you space is limited like mine is.

I tried two of these (one manufactured in 2020 and the other in 2021), and in both cases, the sta...

I tried two of these (one manufactured in 2020 and the other in 2021), and in both cases, the stand frame was not parallel to the floor. The leg height is not adjustable, so it requires you to prop up the left (wheel) side almost half an inch to level it out if you want to use it with a level outfeed table. If it were going to be short on one side, it should've been shorter on the opposite side to keep the work piece against the fence. I thought my first one was defective so I got a replacement, but that had the same problem, so this seems like a design flaw. If you don't care about your table saw table being parallel to the ground and want the mobility, then this stand works great. Otherwise, be prepared to prop up one side or purchase a different stand.

Problem with loose blade

We bought our Dewalt 7491 Job site table saw 3/19/2019. It was awesome until I changed the blade out from the original Dewalt blade to Diablo blade. We have always used Diablo blades in our table saws. This is not our first table saw but it is our first Dewalt table saw. Most of our tools are Dewalt, so we thought we would go with the Dewalt table saw. Very disappointed after changing out the blade after two years of use, it was pretty dull as you can imagine. No matter what I do, the arbor nut keeps coming loose after about 4-6 cuts. I have made sure I have the nut on correctly, first thing I checked. I'm going to call Dewalt to see if I have options. We love Dewalt tools