Carnauba Polish is a fast-drying surface finish, rich in carnauba wax and beeswax. Very soft and easy to apply, it hardens quickly and when buffed, imparts a beautiful hard, high sheen. It is Step 3 of our 3 Step Waxing Process. Used For A surface finish for waxed or oiled timber. Also suitable for non-porous surfaces such as metal, marble, slate and concrete. Ideal for use over chalk paint and Venetian plaster. Surface Preparation Ensure the surface is clean and dry before application. Timber needs to be previously waxed or oiled before application. Not suitable for raw timber. How to Apply Dip a clean, lint-free cloth and spread sparingly over the surface, not more than one square metre at a time, in a circular motion. Buff back vigorously with a soft, lint-free cloth or buffing pads. Use up to three coats, buffing well between each coat. Allow 20 - 30 minutes between coats. Dry Time 20 minutes provided excess is wiped away. Maintenance Depending on wear, apply if the waxed area becomes dull or faded. Clean Up Warm, soapy water for hands or cloth. Excess wax on timber; dampen a cloth with d-limonene or mineral turpentine.