The Godox X3 flash trigger is a modern Godox X 2.4GHz system transmitter with touchscreen and TTL support. With a compact, lightweight, and simple design, the X3 features an intuitive touchscreen and controls for easy access and quick setting changes. Nano scale revolution Godox X3 is a groundbreaking, minimalist TTL radio trigger with a touchscreen, designed to combine lightness and small size with intuitive operation. The X3 allows easy control of devices in the Godox X 2.4GHz system. Touch and swipe The touch interface, combined with physical buttons, makes operation intuitive after just a few moments. Like other Godox flash triggers such as XPro and X2, the X3 supports TTL, manual, multi-flash modes, as well as HSS, front, and rear curtain sync. OLED screen With a clear OLED touch screen, the X3 offers high contrast and fast refresh rate information. Perfect for both indoor and outdoor sessions, it allows you to adjust screen brightness by swiping left or right. There is also a screen lock function to prevent accidental touches. Precision The X3's bidirectional TCM mode allows for instant and easy conversion and transfer of parameters between TTL and manual modes. Whether you prefer automated operation or precise manual control, the X3 enables quick switching between them. Interference-free The X3 allows control and triggering of devices in the Godox X 2.4GHz system. The backup channel scan feature prevents interference from other users working in the same system. New is also the quick synchronization function. Fast charging Equipped with a lithium battery, the X3 transmitter can be charged from 0% to 100% in just 2 hours via USB-C. The USB-C port is also used for firmware updates.
The Godox X3 flash trigger is a modern Godox X 2.4GHz system transmitter with touchscreen and TTL support. With a compact, lightweight, and simple design, the X3 features an intuitive touchscreen and controls for easy access and quick setting changes. Nano scale revolution Godox X3 is a groundbreaking, minimalist TTL radio trigger with a touchscreen, designed to combine lightness and small size with intuitive operation. The X3 allows easy control of devices in the Godox X 2.4GHz system. Touch and swipe The touch interface, combined with physical buttons, makes operation intuitive after just a few moments. Like other Godox flash triggers such as XPro and X2, the X3 supports TTL, manual, multi-flash modes, as well as HSS, front, and rear curtain sync. OLED screen With a clear OLED touch screen, the X3 offers high contrast and fast refresh rate information. Perfect for both indoor and outdoor sessions, it allows you to adjust screen brightness by swiping left or right. There is also a screen lock function to prevent accidental touches. Precision The X3's bidirectional TCM mode allows for instant and easy conversion and transfer of parameters between TTL and manual modes. Whether you prefer automated operation or precise manual control, the X3 enables quick switching between them. Interference-free The X3 allows control and triggering of devices in the Godox X 2.4GHz system. The backup channel scan feature prevents interference from other users working in the same system. New is also the quick synchronization function. Fast charging Equipped with a lithium battery, the X3 transmitter can be charged from 0% to 100% in just 2 hours via USB-C. The USB-C port is also used for firmware updates.
The Godox X3 flash trigger is a modern Godox X 2.4GHz system transmitter with touchscreen and TTL support. With a compact, lightweight, and simple design, the X3 features an intuitive touchscreen and controls for easy access and quick setting changes. Nano scale revolution Godox X3 is a groundbreaking, minimalist TTL radio trigger with a touchscreen, designed to combine lightness and small size with intuitive operation. The X3 allows easy control of devices in the Godox X 2.4GHz system. Touch and swipe The touch interface, combined with physical buttons, makes operation intuitive after just a few moments. Like other Godox flash triggers such as XPro and X2, the X3 supports TTL, manual, multi-flash modes, as well as HSS, front, and rear curtain sync. OLED screen With a clear OLED touch screen, the X3 offers high contrast and fast refresh rate information. Perfect for both indoor and outdoor sessions, it allows you to adjust screen brightness by swiping left or right. There is also a screen lock function to prevent accidental touches. Precision The X3's bidirectional TCM mode allows for instant and easy conversion and transfer of parameters between TTL and manual modes. Whether you prefer automated operation or precise manual control, the X3 enables quick switching between them. Interference-free The X3 allows control and triggering of devices in the Godox X 2.4GHz system. The backup channel scan feature prevents interference from other users working in the same system. New is also the quick synchronization function. Fast charging Equipped with a lithium battery, the X3 transmitter can be charged from 0% to 100% in just 2 hours via USB-C. The USB-C port is also used for firmware updates.
The Godox X3 flash trigger is a modern Godox X 2.4GHz system transmitter with touchscreen and TTL support. With a compact, lightweight, and simple design, the X3 features an intuitive touchscreen and controls for easy access and quick setting changes. Nano scale revolution Godox X3 is a groundbreaking, minimalist TTL radio trigger with a touchscreen, designed to combine lightness and small size with intuitive operation. The X3 allows easy control of devices in the Godox X 2.4GHz system. Touch and swipe The touch interface, combined with physical buttons, makes operation intuitive after just a few moments. Like other Godox flash triggers such as XPro and X2, the X3 supports TTL, manual, multi-flash modes, as well as HSS, front, and rear curtain sync. OLED screen With a clear OLED touch screen, the X3 offers high contrast and fast refresh rate information. Perfect for both indoor and outdoor sessions, it allows you to adjust screen brightness by swiping left or right. There is also a screen lock function to prevent accidental touches. Precision The X3's bidirectional TCM mode allows for instant and easy conversion and transfer of parameters between TTL and manual modes. Whether you prefer automated operation or precise manual control, the X3 enables quick switching between them. Interference-free The X3 allows control and triggering of devices in the Godox X 2.4GHz system. The backup channel scan feature prevents interference from other users working in the same system. New is also the quick synchronization function. Fast charging Equipped with a lithium battery, the X3 transmitter can be charged from 0% to 100% in just 2 hours via USB-C. The USB-C port is also used for firmware updates.
Last updated at 06/28/2026 06:06:58
Godox X3-N X3N TTL Wireless Flash Trigger Compatible with Nikon Camera, Touchscreen Flash Transmitter, 2.4GHz HSS 1/8000s, Built-in 850mAh Li-ion
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Wholesale godox x3 ttl wireless flash trigger touch creen flash transmitter transmitter for canon/nikon/so.ny/so.ny/olympus camera,1 Unit
Delivery $14.74
Wholesale Godox X3 TTL Flash Trigger Transmitter Wireless Flash Trigger Touch creen Flash Transmitter Flash Trigger For Nikon professional camera
Delivery $14.17
Godox X3-N TTL Wireless Flash Trigger for Nikon
Godox X3 Touchscreen TTL Wireless Flash Trigger For Nikon
Delivery $78.98
Godox X3 Transmitter For Nikon
Delivery $40.96
Godox X3 N TTL Wireless Flash Trigger for Nikon Touchscreen Xnano
Delivery $14.45
Godox X3-N Touchscreen TTL Wireless Flash Trigger for Nikon Camera, 1
Free delivery
Godox X3 N Xnano Touchscreen TTL Wireless Flash Trigger for Nikon
Delivery $43.51
Godox X3 Nikon Touch Screen Flash Trigger
Delivery $25
originally posted on essentialphoto.co.uk
I've shot with the X-Pro S for a few years now and it's great. As soon as I saw this X3 Trigger on PixaPro's Instagram for pre-order, I dived straight in to purchase it.I've used it a few times now and its seamless, small and doesn't take up hardly any space in the camera bag. It did come in Chinese but a simple setting in the language got me to English in seconds.I like the touch screen and the ability to increase flash power with a slide of your finger and individual or as a group. The updating process seems very simple to do and I look forward to future updates.I'm keen to see if Godox and PixaPro embrace the OLED touch screens built into their flashes next.Would recommend for anyone :)
originally posted on bhphotovideo.com
The Xnano has been a massive upgrade over the Xpro because of its simple design, internal USB C rechargeable battery, touch screen and hot shoe locking design. I am a professional real estate and architecture photographer and this has changed the game for me.The simple design and smaller footprint has made this a much easier system to work with than the larger Xpro controller. I love the feel of the buttons and control dial. They are far more professional grade than the plastic of the Xpro.The USB C has such a welcomed change. I no longer need numerous sets of AA batteries to get through my day. I can charge it from so many sources if I need to and the battery lasts all day.The touch screen is responsive and fast. It makes navigating all the menus and options ... MoreThe Xnano has been a massive upgrade over the Xpro because of its simple design, internal USB C rechargeable battery, touch screen and hot shoe locking design. I am a professional real estate and architecture photographer and this has changed the game for me.The simple design and smaller footprint has made this a much easier system to work with than the larger Xpro controller. I love the feel of the buttons and control dial. They are far more professional grade than the plastic of the Xpro.The USB C has such a welcomed change. I no longer need numerous sets of AA batteries to get through my day. I can charge it from so many sources if I need to and the battery lasts all day.The touch screen is responsive and fast. It makes navigating all the menus and options super easy. I love that you can pause the flash for when I am shooting brackets and then with a simple touch re-enable it for a flash frame.By far my favorite feature is the locking hot shoe. I hate the screw-down type on the Xpro and this one is a locking metal pin that is far more secure and easy to remove.If I had a con it would be that the touch screen is a little too precise and because of the smaller size if you have larger fingers it can fail to activate because you didn't touch perfectly on the small area I wanted you to.
originally posted on bhphotovideo.com
When I first turned it on the sub-menu appeared in Japanese Characters. There is a place where you can switch all menu’s to English. The geniuses at BPH figured it out within 10 minutes even though they had not gotten one in yet.Takes some getting used to because it’s so different from the original. I’m hoping to get used to it quickly as right now I line the old one better…Time will tell..
| Variant | |
| title | Default Title |
Godox X3-N X3N TTL Wireless Flash Trigger Compatible with Nikon Camera, Touchscreen Flash Transmitter, 2.4GHz HSS 1/8000s, Built-in 850mAh Li-ion
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Wholesale godox x3 ttl wireless flash trigger touch creen flash transmitter transmitter for canon/nikon/so.ny/so.ny/olympus camera,1 Unit
Delivery $14.74
Wholesale Godox X3 TTL Flash Trigger Transmitter Wireless Flash Trigger Touch creen Flash Transmitter Flash Trigger For Nikon professional camera
Delivery $14.17
Godox X3-N TTL Wireless Flash Trigger for Nikon
Godox X3 Touchscreen TTL Wireless Flash Trigger For Nikon
Delivery $78.98
I've shot with the X-Pro S for a few years now and it's great. As soon as I saw this X3 Trigger on PixaPro's Instagram for pre-order, I dived straight in to purchase it.I've used it a few times now and its seamless, small and doesn't take up hardly any space in the camera bag. It did come in Chinese but a simple setting in the language got me to English in seconds.I like the touch screen and the ability to increase flash power with a slide of your finger and individual or as a group. The updating process seems very simple to do and I look forward to future updates.I'm keen to see if Godox and PixaPro embrace the OLED touch screens built into their flashes next.Would recommend for anyone :)
The Xnano has been a massive upgrade over the Xpro because of its simple design, internal USB C rechargeable battery, touch screen and hot shoe locking design. I am a professional real estate and architecture photographer and this has changed the game for me.The simple design and smaller footprint has made this a much easier system to work with than the larger Xpro controller. I love the feel of the buttons and control dial. They are far more professional grade than the plastic of the Xpro.The USB C has such a welcomed change. I no longer need numerous sets of AA batteries to get through my day. I can charge it from so many sources if I need to and the battery lasts all day.The touch screen is responsive and fast. It makes navigating all the menus and options ... MoreThe Xnano has been a massive upgrade over the Xpro because of its simple design, internal USB C rechargeable battery, touch screen and hot shoe locking design. I am a professional real estate and architecture photographer and this has changed the game for me.The simple design and smaller footprint has made this a much easier system to work with than the larger Xpro controller. I love the feel of the buttons and control dial. They are far more professional grade than the plastic of the Xpro.The USB C has such a welcomed change. I no longer need numerous sets of AA batteries to get through my day. I can charge it from so many sources if I need to and the battery lasts all day.The touch screen is responsive and fast. It makes navigating all the menus and options super easy. I love that you can pause the flash for when I am shooting brackets and then with a simple touch re-enable it for a flash frame.By far my favorite feature is the locking hot shoe. I hate the screw-down type on the Xpro and this one is a locking metal pin that is far more secure and easy to remove.If I had a con it would be that the touch screen is a little too precise and because of the smaller size if you have larger fingers it can fail to activate because you didn't touch perfectly on the small area I wanted you to.
When I first turned it on the sub-menu appeared in Japanese Characters. There is a place where you can switch all menu’s to English. The geniuses at BPH figured it out within 10 minutes even though they had not gotten one in yet.Takes some getting used to because it’s so different from the original. I’m hoping to get used to it quickly as right now I line the old one better…Time will tell..
I was concerned when these were announced. The use of a rechargeable battery that takes 2hours to recharge…what happens if it dies during a shoot? Would I need to carry an AA back up option?Well they finally arrived and after a quick charge we were off. After a handful of jobs over about a week, I’d managed to get 27 hours of shooting time out of one charge nearly 3000 flashes and it only missed a handful. I’ve quickly got used to the interface and am moving around it quickly. I really like that you can not only turn of groups but you can also remove them from the screen if your not using them. Making for a much cleaner interface. I will absolutely be updating the studios triggers with more X3 as and when I need to.
Finally, a flash trigger with a good UI and quick function. I am able to quickly see and adjust my flashes independently without having to fuddle with any buttons. Just click the interface and turn the wheel. Operates similarly to Apple's Smart Watch. The design is sleek and small, and is very impressive. The build quality feels great, it doesn't want to fall off my hot shoe, despite not locking on either.
I've had this for a couple of weeks now, but only recently was in a situation that required HSS. I set this trigger for HSS, the camera was set for HSS (Nikon D850) but the shutter speed will not go above 1/250. Just to make sure the issue was not with the camera, I attached my Pro II trigger, the one that this was supposed to replace, and HSS started working fine immediately. So, I don't know what the issues is, it's firmly seated, I can't find any other setting in the menu that affects HSS, it just doesn't work.
I have used this trigger on Hasselblad cameras (Nikon). The trigger works well with no glitches, however, with the screen being so small I found myself using the scroll wheel for all the adjustments and I do not have big hands. If the screen was slightly larger, then I could make use of the touchscreen. I can't say anything about the battery life yet as after two shoots with it, there is still a good battery level left.
This trigger lacks support for the Sekonic L-858-G light meter and does not have support for center-pin or a Legacy Hot Shoe either. Oddly, the later model for Olympus has both. Lack of one star for the lack of meter support in the menu, and another for no legacy hot shoe support for using on another brand of camera needing only a center-pin hot shoe to trigger the flash. Hopefully Godox will fix this in some future firmware as the Olympus model does support both in its menu.Initially, it came with Chinese language on starting. The manual shows the menu symbol and how to change it so not too much of an issue once set. This has also been firmware updated too to version 1.09 with the G3 II firmware updater off the Godox site.
It’s small and sleek. I’m a person who prefers tactile buttons. I liked my Blackberry more than any iPhone since. But, didn’t notice these issues on trigger because I’m not typing. Only used once. Set it up and tested fine. Event ready to start and I looked down to a blank screen. Buttons didn’t work. On/off didn’t change anything. Had my Proii also, switched to that. Next day I turned it on and it worked fine. No idea what happened. Haven’t used it since. Maybe I’ll try again next shoot.
Have been using the Godax X-Pro and X-2 with a 3 light setup, all lights on Manual. Tried the new Xnano and immediately had misfires, flashes changing power, etc. Had to take it off after a few minutes. Probably because the D3 is such an old (but mighty!) model. For the D3 use the X-pro or X2. They work flawlessly. Rated it high because it works great on my Nikon mirrorless.
| Variant | |
| title | Default Title |
