Gyprock Pro-Repair 10 is a lightweight plaster based compound with a 10 minute working time, ideal for small-scale jointing jobs, patching holes and defects in Gyprock Plasterboard and Cemintel Fibre Cement. It is tinted for easy identification. The compound can be used as a base and topping coat, or as a base coat only, providing good tape adhesion while being easy to sand. When used for all three coats with a fibreglass, open fibre jointing tape such as FibaFuse, it is possible to sand the topcoat on the same day after sufficient drying time.
Gyprock Pro-Repair 10 is a lightweight plaster based compound with a 10 minute working time, ideal for small-scale jointing jobs, patching holes and defects in Gyprock Plasterboard and Cemintel Fibre Cement. It is tinted for easy identification. The compound can be used as a base and topping coat, or as a base coat only, providing good tape adhesion while being easy to sand. When used for all three coats with a fibreglass, open fibre jointing tape such as FibaFuse, it is possible to sand the topcoat on the same day after sufficient drying time.
Gyprock Pro-Repair 10 is a lightweight plaster based compound with a 10 minute working time, ideal for small-scale jointing jobs, patching holes and defects in Gyprock Plasterboard and Cemintel Fibre Cement. It is tinted for easy identification. The compound can be used as a base and topping coat, or as a base coat only, providing good tape adhesion while being easy to sand. When used for all three coats with a fibreglass, open fibre jointing tape such as FibaFuse, it is possible to sand the topcoat on the same day after sufficient drying time.
Gyprock Pro-Repair 10 is a lightweight plaster based compound with a 10 minute working time, ideal for small-scale jointing jobs, patching holes and defects in Gyprock Plasterboard and Cemintel Fibre Cement. It is tinted for easy identification. The compound can be used as a base and topping coat, or as a base coat only, providing good tape adhesion while being easy to sand. When used for all three coats with a fibreglass, open fibre jointing tape such as FibaFuse, it is possible to sand the topcoat on the same day after sufficient drying time.
Last updated at 07/23/2026 11:28:51
Gyprock Pro-Repair 10 8kg Bag
Delivery $149
CSR Gyprock 8kg Pro-Repair 10 Patch And Repair
Delivery $10
Csr Gyprock 8kg Pro-repair 10 Patch And Repair
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
originally posted on bunnings.com.au
We use this to repair wall patches in a school environment where we need it to dry quickly. It good to trowel on and finish off. Fine enough to use as a finish coat but doesn't shrink back like premix patching products
originally posted on bunnings.com.au
great for patching and painting on the same day. Slightly less easy to sand than premixed drying type top coat compounds -ie dry product is a little bit harder
originally posted on bunnings.com.au
Had to do some plaster board patch work, this product did a good job can not see where the repair was.
Gyprock Pro-Repair 10 8kg Bag
Delivery $149
CSR Gyprock 8kg Pro-Repair 10 Patch And Repair
Delivery $10
Csr Gyprock 8kg Pro-repair 10 Patch And Repair
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
We use this to repair wall patches in a school environment where we need it to dry quickly. It good to trowel on and finish off. Fine enough to use as a finish coat but doesn't shrink back like premix patching products
great for patching and painting on the same day. Slightly less easy to sand than premixed drying type top coat compounds -ie dry product is a little bit harder
Had to do some plaster board patch work, this product did a good job can not see where the repair was.
