Item came in quick time. Quality is great for its price, and compact. Quite long, but to be expected due to how compatible it is. Mesh all around except the front, so cooling is not a problem. Very happy with this case.

Great case, good air flow and excellent compatibility!

Great but Hard work, not quite as compatible as it suggests

Using this case with a ITX mobo and sfx. Psu at the front, wires don’t reach. 1 of the ways to fit the psu that would help with the wire length of sfx is atx psu only….Barely any width fitting a 360mm aio. Aio fans are squished right upto the ram sticks.Apart from that the case is awesome, plenty of gpu clearance, have a 4070 with t30s fans in the bottom and still a finger gap between the fans and gpu.Highly recommended, custom cables are needed for a tidy job if using sfx psu but it’s workable without. Psu can only be fitted to the side if using six cables.

Great case

Great case with lots of possibilities to modify.even though the case does have many vents it's quiet, providing you use decent parts.Happy with the purchase.

Ohhhh Yes, what else is there to say

For a long time ive been wondering why mATX cases were so big, up until now I was using a Corsair 2500X case which I thought was huge for an mATX case, and even considered just moving to ITX instead, I had been debating the Lian Li A3 for a while now, wondering if I could fit everything I wanted in it, and after watching and reading many reviews on it I decided to bite the bullet, at the price point it wouldnt of been such a hard loss if I couldnt get in it what I wanted, however, that wasnt the case.It was a bit tricky to get everything to fit and you really have to think about where (above all things) you are going to mount the PSU and how you are going to mount it, I removed the PSU and GPU from my old build to work this out before stripping everything else out ... MoreFor a long time ive been wondering why mATX cases were so big, up until now I was using a Corsair 2500X case which I thought was huge for an mATX case, and even considered just moving to ITX instead, I had been debating the Lian Li A3 for a while now, wondering if I could fit everything I wanted in it, and after watching and reading many reviews on it I decided to bite the bullet, at the price point it wouldnt of been such a hard loss if I couldnt get in it what I wanted, however, that wasnt the case.It was a bit tricky to get everything to fit and you really have to think about where (above all things) you are going to mount the PSU and how you are going to mount it, I removed the PSU and GPU from my old build to work this out before stripping everything else out of my old system, I ended up using the SSD bracket at the front of the case and using the SFX-L to ATX bracket to mount it with the supplied stand-off's to the SSD bracket, this allowed me to then mount my pump res combo to the other side of the SSD bracket, overall this was about an hour and a half of work, once I knew these 3 parts would fit, the rest was easy, you just have to remember to fit things in a certain order, so for me it was motherboard, then any wiring required at the top of the board before fitting my radiator and fans as this then blocks any access to to top ports of the board, its the same situation for the bottom end of the board, make sure you wire everything up before fitting any fans and GPU in the bottom end of the case.Overall, im over the moon with this case, such a small footprint for such a large system and half the size of anything ive owed before, thank you Lian Li and OCuk: https://imgur.com/kVt8KtH

Probably the best case for someone who wants itx

I love the look and size of this case, it’s also great for airflow, just wish the front had something better going on

Top!

Top!