I was looking to do an all white build with the new 12th Gen intel platform and this case whilst on the higher priced side, allows for the best cable management along with being able to mount the GPU in the upright mode to show it off more.Alongside the Lian Li AL-120 white fans it looks amazing and is very easy to run all cables where you need them.I would recommend the front mesh panel if you are planning on running a high end GPU with the upright kit, temps with the glass front and 3080 Ti were sitting around 85degrees immediately when gaming in 2k Ultra on Forza Horizon 5 but with the mesh front never went above 76degrees.This is a heavy case and due to the dual chamber is wider than you might expect.

Awesome case, easy to build on.

Amazing re-design, now this case offers full compatibility with lowe mounted fans and usb 3 headers that are lower positioned. Removable fan brackets for easy access and mount. Cable routing grommets are more flexible and less prone to go out of the frame. Dual psu options, included rgb and the flexibility to install your system to the left or right of the case makes overall the best option out there.

Brooklyn Micro Center FOREVER..

..Lian Li is cool too.I placed an online order for the Lian Li O11 Dynamic EVO at the Brooklyn location of Micro Center. I arrived a few minutes after closing, as the final customers were finishing up at the registers. The manager, with absolutely no hassle, let me in through the exit, to pick up my order. The store and staff DID NOT have to do that and would have been completely justified in saying "no".As for the case. It was an amazing, and much needed upgrade. I had built my first PC a few months prior and scored at the time I decided to buy parts. The only thing lacking was my case. I initially had the Apevia Genesis, which was too small, with not enough air flow, for my components. I had no idea how poor the airflow and termps were until I upgraded to the ... More..Lian Li is cool too.I placed an online order for the Lian Li O11 Dynamic EVO at the Brooklyn location of Micro Center. I arrived a few minutes after closing, as the final customers were finishing up at the registers. The manager, with absolutely no hassle, let me in through the exit, to pick up my order. The store and staff DID NOT have to do that and would have been completely justified in saying "no".As for the case. It was an amazing, and much needed upgrade. I had built my first PC a few months prior and scored at the time I decided to buy parts. The only thing lacking was my case. I initially had the Apevia Genesis, which was too small, with not enough air flow, for my components. I had no idea how poor the airflow and termps were until I upgraded to the Lian Li. It has tons of room, quality parts made from excellent material and designed perfectly for cable management.My Rig:intel i9 12900kASUS B-660 Prime D4 Plus MoBoGigabyte RTX 3090 TI32gb DDR4 Corsair Vengeance RGB Ram1tb WD Black SSD1tb WD Blue SSDAlseye Digital Temp CPU Cooler w/ 2 fans10 RGB FansLian Li Strimer v2 RGB GPU cableRGB 24-pin MoBo cableWiFI CardRGB light strips

Great case and service from B&H!

The Lian Li O11 Dynamic EVO seemed to be the golden standard across reviewers online, so I decided to make the jump and glad I did! You can tell everything was very well thought through when it comes to building in this case. What especially interested me is the ability to vertically mount the GPU (waiting for a 90 degree power adapter to come out for the Nvidia 40 series cards with 12VHPWR.) Cable management is great, everything can be managed and hidden in the back. It comes with many accessories and mounting screws, so you'll be able to configure it a number of ways out of the box. There are extra accessories you can buy to upgrade down the road which is nice flexibility to have.This was my first time ordering from B&H across the border to Canada and the ... MoreThe Lian Li O11 Dynamic EVO seemed to be the golden standard across reviewers online, so I decided to make the jump and glad I did! You can tell everything was very well thought through when it comes to building in this case. What especially interested me is the ability to vertically mount the GPU (waiting for a 90 degree power adapter to come out for the Nvidia 40 series cards with 12VHPWR.) Cable management is great, everything can be managed and hidden in the back. It comes with many accessories and mounting screws, so you'll be able to configure it a number of ways out of the box. There are extra accessories you can buy to upgrade down the road which is nice flexibility to have.This was my first time ordering from B&H across the border to Canada and the process was flawless. Duties pre-paid and reasonable shipping rates, the package arrived within days of ordering. If you're Canadian don't hesitate! I'll be ordering again in the future.

Great case for enthusiasts

I was looking for case that would accommodate a custom cooling loop, and this has worked out extremely well for my build.MSI Meg Z790 AceMSI 4090 SuprimAlphacool Eisblock Aurora Acryl GPX-N RTX 4090 Suprim GPU Water BlockCorsair Hydro X Series, XC7 RGB PRO CPU Water Block2 - Corsair Hydro X Series, XR5-360mm Radiators6 - Corsair QL Series, iCUE QL120 RGB1 - Corsair Hydro X Series XD7 RGB Pump/Reservoir Combo

Love the case

The case took awhile to get here but once it arrived I loved my purchase. It was worth the wait. First of all, if your looking for a case I would definitely recommend this because of the customizable options. Super easy to work on, I like how that you can take it apart easily and access any side of it. The airflow is awesome also. The quality is top notch. The durability seems super sturdy. Pretty heavy case coming in just around 33 pounds without any parts in there. The glass on the front and side are solid. Plenty ways you can mount your fans, radiator, and gpu. The only thing I am bummed about is that is doesnt come with mesh front for more airflow but oh well. The led in the front of the case was a nice touch, you can see the led on the side of the glass. The ... MoreThe case took awhile to get here but once it arrived I loved my purchase. It was worth the wait. First of all, if your looking for a case I would definitely recommend this because of the customizable options. Super easy to work on, I like how that you can take it apart easily and access any side of it. The airflow is awesome also. The quality is top notch. The durability seems super sturdy. Pretty heavy case coming in just around 33 pounds without any parts in there. The glass on the front and side are solid. Plenty ways you can mount your fans, radiator, and gpu. The only thing I am bummed about is that is doesnt come with mesh front for more airflow but oh well. The led in the front of the case was a nice touch, you can see the led on the side of the glass. The small detail on the case are nice! such as, the two screws up top to hold the glass in place while you transport it, Bunch of ways to route your cables to make it look neat and how you can move the usb/ usb-c mounts on the bottom. The box comes with many parts. It is all about how you want your case to be and not be limited with less options. Hope yall love it as much is I do.

O11 Dynamic Lian Li

I had built my pc from the ground up. This case is not only aesthetically pleasing, it is very easy to slide off panels. The glass panels and back panel don’t need screws. They lock in place with a few pins and bang bang, secured. I also like if you wish to install additional storage, specifically SATA ssd drives, you can simply open a slot at the back of the pc without removing an entire panel. I am very bad at cable management, but thanks the orientation of the back part of the case, it is easily hidden and stuffed in premade wire slots. For a $200 case, it is well made! It is very forgiving for beginner pc builders for sure. I can say that because it’s my first pc ever I had build it in.

Only one flaw..

Absolutely no problems with micro center, extremely quick processing and shipping. No problems with the case itself either, it’s perfect. It’s so clean and clear, spacious enough for all components (RTX 4090), and easy to work with/in with great cable management functionality built in. This was my first PC build I did myself and this case made it truly easy to do. My ONLY knock on this case and it’s not even their fault is that it’s so wide that there is not a SINGLE under desk mount that is wide enough for it except for one for a specific Secret Labs gaming sit/stand desk. That’s the only mount on the whole market wide enough, I scoured the internet for hours. So if you want a mountable PC, stay away but if you have the desk room then it’s well worth the purchase!

Solid construction with multiple configurations

I haven't bought a PC case in over 10 years. After seeing multiple eye-catching builds on PC Part Picker, this case really caught my eye. It seems to be quite popular and rightfully so. I'm still in the process of installing the components, but so far, I am very impressed with the well thought out design and engineering behind it! Highly recommended.

performance and looks

This is all in all a terrific case. Obviously it will perform very well. You can watch the Gamers Nexus reviews if you're in doubt. Given the level of machining that goes into the side panel design, the interesting modding options including reverse build, the beautiful aesthetics, and the thermal performance, a price tag of $200 is not unreasonable. One star off for the cable management space, though I would only take a half star off if I could. I honestly recommend removing the drive cage to free up space and finding a side mounting solution for the SSDs. Absent that tiny mod, I think you'd be starving for cable space. Other than that, this is a perfect case for water cooling. You're going to want to display that rig, and this is the best choice. Sadly, it does not ... MoreThis is all in all a terrific case. Obviously it will perform very well. You can watch the Gamers Nexus reviews if you're in doubt. Given the level of machining that goes into the side panel design, the interesting modding options including reverse build, the beautiful aesthetics, and the thermal performance, a price tag of $200 is not unreasonable. One star off for the cable management space, though I would only take a half star off if I could. I honestly recommend removing the drive cage to free up space and finding a side mounting solution for the SSDs. Absent that tiny mod, I think you'd be starving for cable space. Other than that, this is a perfect case for water cooling. You're going to want to display that rig, and this is the best choice. Sadly, it does not come with a vertical GPU mount, like its competitor, the Hyte y60. So, if that's in your theme, be prepared to pay an extra $90 for the Lian Li. However, while people complain about the lack of dust filters here, the Hyte case has those on bottom and top and they are not removable. You don't build a high end rig in a case like either of these without giving it a good dusting every couple months. The overboard dust filtering in the Hyte case does nothing but add impedance. I'd take this case over the Hyte seven days a week and twice on Sunday. If you want a beautiful display chassis for your show piece that doesn't perform like a hotbox, and actually performs well, this is the one you want.