Lian Li PC-O11 Dynamic Tempered Glass Mini Tower Case - White

One of the best cases I've built in. Very good quality and looks amazing and is compact. Only slight gripe I have is that if you are installing an ATX motherboard you can't fully access the backplate to remove the cpu cooler while the motherboard is installed in the case unless I'm doing something wrong.

Good looking and easy to build case. Only problems are screws from factory come way too tight and require significant force to unscrew.

Awesome case with heaps of

Awesome case with heaps of space for its size. Great time all round!

Best Case I've Ever Worked With

Good build experience for such a small-feeling case. Only supports SFX PSUs, so grab yourself a Corsair SF750 (or something).

Fantastic for ATX mobo owners wanting an ITX feel.

Firstly - you must know that it's a wide-mATX sized (ATX capable) case masquerading as ITX - but that's perfectly okay."ATX to ITX: Like you (perhaps) I chose this case because it's the gateway to ITX when you have ATX parts. With just this case and a new SFX sized PSU (you can't use your old ATX PSU) you can transition into ITX in a logical way.Wide:: The case sits on your desk wider than usual, since the ITX power supply sits invisibly behind the motherboard not on top. So if width isn't an issue, it's great, but don't expect it to sit low and tiny like a true 'ITX' case (i.e. the NR200P).Showcase your Parts: You'll enjoy looking at it, it showcases your parts better than almost any case on the market (hence the 011's popularity).Quality design: It has ... MoreFirstly - you must know that it's a wide-mATX sized (ATX capable) case masquerading as ITX - but that's perfectly okay."ATX to ITX: Like you (perhaps) I chose this case because it's the gateway to ITX when you have ATX parts. With just this case and a new SFX sized PSU (you can't use your old ATX PSU) you can transition into ITX in a logical way.Wide:: The case sits on your desk wider than usual, since the ITX power supply sits invisibly behind the motherboard not on top. So if width isn't an issue, it's great, but don't expect it to sit low and tiny like a true 'ITX' case (i.e. the NR200P).Showcase your Parts: You'll enjoy looking at it, it showcases your parts better than almost any case on the market (hence the 011's popularity).Quality design: It has high quality construction and materials. Logical and simple to build in, plenty of room for neat cable management.Drive space: Lots of drive space for a big-ITX style case (Dedicated rack for 2 large HDD's and a removeable plate for 2 smaller SSDs / and then there's your NVME's too, of course).Cooling: Even with 2 glass panels, cooling is not an issue: I filled it with 3 fans along the bottom and a 240 AiO at the rear (with an overclocked Aorus 1080ti) and temps were very good 35-40 for both CPU and GPU, so I was pleased since the two glass panels do take away ventilation opportunities.I reccomend this case. It looks great, is easy to build in, will hold its value and offers an affordable way to transition to ITX parts.

Lian Li PC-O11

Great little PC, well built. Its just a shame mine come with a red mark scratched in to one of the panels. But, still happy with it over all

Lian Li, what can you say?

As always Lian Li make amazing cases and this is one. Although alittle wider the size is suitable for full atx or anything smaller. Has heaps or room for AIO 240/280 or if a smaller board a 320. Make sure you get SFX PSU.

Nirmal's review of Lian-li O11 Dynamic Mini Case - White

Pros: It's a very versatile case. You can fit a lot into a very small form factor because of how well optimized it is for various configurations.Cons: The build quality. Not sure if it was just my case or if it's on all but I would expect better tolerances for the parts, especially the rear of the case that requires you to move certain parts to suit your configuration. I found that some of the parts were slightly too big by about 1mm, which meant that I had to use quite a bit of force to get certain parts in place. Because of this, the part where the motherboard I/o cover is supposed to fit, is actually bowed outwards. Resulting in the motherboard I/o shield not actually touching it at all, there is about a 1mm on either side of the cover and about 2-2.5mm gap in ... MorePros: It's a very versatile case. You can fit a lot into a very small form factor because of how well optimized it is for various configurations.Cons: The build quality. Not sure if it was just my case or if it's on all but I would expect better tolerances for the parts, especially the rear of the case that requires you to move certain parts to suit your configuration. I found that some of the parts were slightly too big by about 1mm, which meant that I had to use quite a bit of force to get certain parts in place. Because of this, the part where the motherboard I/o cover is supposed to fit, is actually bowed outwards. Resulting in the motherboard I/o shield not actually touching it at all, there is about a 1mm on either side of the cover and about 2-2.5mm gap in the middle.

So Nice !!!

HelloThe syze of this case is just perfectI recommand to go for a micro atx or mini-itxif you are building a custom watercoolingCable management is easyVery good value for the prizeFD

The Hype is Accurate

Everything I've watched on YouTube about this case, is accurate. It's really a little gem. Simple, adaptable, small form factor and well ventilated. Configuration is unbelievable and it all just works easily. Highly recommend this case.