Kayak Scupper Transducer Mount Lowrance’s transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmerr transducers, both 83/200 kHz and 455/800 kHz DownScan Imaging (DSI) models alike, as well as earlier 2.5cm 200 kHz transducers. It’s easy to instal in most any scupper opening, with few tools, and without messy adhesives as with shoot-thru-hull transducer mountings. Best of all, the Lowrance Scupper Mount positions the Skimmerr transducer, so it’s totally submerged in the water you’re fishing. That guarantees maximum sonar signal return sensitivity, producing the absolute clearest underwater returns of structure and fish possible.
Kayak Scupper Transducer Mount Lowrance’s transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmerr transducers, both 83/200 kHz and 455/800 kHz DownScan Imaging (DSI) models alike, as well as earlier 2.5cm 200 kHz transducers. It’s easy to instal in most any scupper opening, with few tools, and without messy adhesives as with shoot-thru-hull transducer mountings. Best of all, the Lowrance Scupper Mount positions the Skimmerr transducer, so it’s totally submerged in the water you’re fishing. That guarantees maximum sonar signal return sensitivity, producing the absolute clearest underwater returns of structure and fish possible.
Kayak Scupper Transducer Mount Lowrance’s transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmerr transducers, both 83/200 kHz and 455/800 kHz DownScan Imaging (DSI) models alike, as well as earlier 2.5cm 200 kHz transducers. It’s easy to instal in most any scupper opening, with few tools, and without messy adhesives as with shoot-thru-hull transducer mountings. Best of all, the Lowrance Scupper Mount positions the Skimmerr transducer, so it’s totally submerged in the water you’re fishing. That guarantees maximum sonar signal return sensitivity, producing the absolute clearest underwater returns of structure and fish possible.
Kayak Scupper Transducer Mount Lowrance’s transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmerr transducers, both 83/200 kHz and 455/800 kHz DownScan Imaging (DSI) models alike, as well as earlier 2.5cm 200 kHz transducers. It’s easy to instal in most any scupper opening, with few tools, and without messy adhesives as with shoot-thru-hull transducer mountings. Best of all, the Lowrance Scupper Mount positions the Skimmerr transducer, so it’s totally submerged in the water you’re fishing. That guarantees maximum sonar signal return sensitivity, producing the absolute clearest underwater returns of structure and fish possible.
Last updated at 07/24/2024 09:48:09
originally posted on bcf.com.au
Bought this, its a great product and fits well. But the bungs supplied do not seal around the thread or cable, and water will come up the scupper hole and into the kayak. The way mine is set up, it nearly sunk. Had to use expanding foam and sealer to prevent water come in up again.
originally posted on homeessentialsdirect.com
I installed the Lowrance Transducer mount kit on my 2020 Perception Pescadore Pro 120 Kayak. Use caution when installing, as materials are light duty. My Kayak has a molded in cavity under the hull for a transducer, so installing was simple. A couple of mods were required as the front tank well will fill with water because the Lowrance mount acts as a scupper plug when installed according to instructions. I removed the (round) foam disk/plug that slides over the threaded screw prior to installing and this allows for water to drain through fairly quickly. Save the foam disk for future use. I also drilled several holes through the side of the plastic Lowrance cover/cap to facilitate faster water drain. A 8 plastic zip tie was needed to secure the cap in my case ... MoreI installed the Lowrance Transducer mount kit on my 2020 Perception Pescadore Pro 120 Kayak. Use caution when installing, as materials are light duty. My Kayak has a molded in cavity under the hull for a transducer, so installing was simple. A couple of mods were required as the front tank well will fill with water because the Lowrance mount acts as a scupper plug when installed according to instructions. I removed the (round) foam disk/plug that slides over the threaded screw prior to installing and this allows for water to drain through fairly quickly. Save the foam disk for future use. I also drilled several holes through the side of the plastic Lowrance cover/cap to facilitate faster water drain. A 8 plastic zip tie was needed to secure the cap in my case because the hull shape around the scupper hole wouldnt allow the cap to snap in place.
originally posted on homeessentialsdirect.com
I use this with my Ascend sit on top kayak. I know other kayakers that have had the wiring from their depth finders damaged by heat when using in-hull mounts, so I decided to go with this option. It's a slight hassle to take in and out every time, but I'm hoping it will extend the life of the product.
Bought this, its a great product and fits well. But the bungs supplied do not seal around the thread or cable, and water will come up the scupper hole and into the kayak. The way mine is set up, it nearly sunk. Had to use expanding foam and sealer to prevent water come in up again.
I installed the Lowrance Transducer mount kit on my 2020 Perception Pescadore Pro 120 Kayak. Use caution when installing, as materials are light duty. My Kayak has a molded in cavity under the hull for a transducer, so installing was simple. A couple of mods were required as the front tank well will fill with water because the Lowrance mount acts as a scupper plug when installed according to instructions. I removed the (round) foam disk/plug that slides over the threaded screw prior to installing and this allows for water to drain through fairly quickly. Save the foam disk for future use. I also drilled several holes through the side of the plastic Lowrance cover/cap to facilitate faster water drain. A 8 plastic zip tie was needed to secure the cap in my case ... MoreI installed the Lowrance Transducer mount kit on my 2020 Perception Pescadore Pro 120 Kayak. Use caution when installing, as materials are light duty. My Kayak has a molded in cavity under the hull for a transducer, so installing was simple. A couple of mods were required as the front tank well will fill with water because the Lowrance mount acts as a scupper plug when installed according to instructions. I removed the (round) foam disk/plug that slides over the threaded screw prior to installing and this allows for water to drain through fairly quickly. Save the foam disk for future use. I also drilled several holes through the side of the plastic Lowrance cover/cap to facilitate faster water drain. A 8 plastic zip tie was needed to secure the cap in my case because the hull shape around the scupper hole wouldnt allow the cap to snap in place.
I use this with my Ascend sit on top kayak. I know other kayakers that have had the wiring from their depth finders damaged by heat when using in-hull mounts, so I decided to go with this option. It's a slight hassle to take in and out every time, but I'm hoping it will extend the life of the product.
Installed this on my 2016 Jackson Big Rig kayak. It works perfectly. It sits the transducer low enough into the water, but tucked into the scupper hole enough that it is protected against dragging.
I Haven't used this product yet. I am still waiting for the weather to warm up , so we can get out in our KAYAKS & do some fishing. At the moment the water temp is still 8 Deg C, so a little bit on the cool side for KAYAKING.
I bought this item to fit the 83/200 hdi transducer to a Viking pf400 kayak. The bulky slide mount can be replaced by the low profile one in this kit. Perfect.
This mount worked perfect on my Kayak, Very easy to install and is also very well made. I installed it in a Wilderness System's Ride 135. It come with very easy instructions. It took me about 15 to 20 minutes to install. I love it.
This scupper mount is meant for the Lowrance transducer. I however used it to mount the Garmin Echo 151dv transducer instead. It takes a little rigging but works perfectly for what I used it for. I can only imagine that it would work even better with the correct transducer!
This product works great. I have it installed on a Native Watercraft Magic 12 using the Lowrance Elite-4x DSI. I did have to modify the bottom of the bracket so that it would work with the hull of my kayak but this was easy to do and now works perfectly. I have seen other post about the item being cheaply made and easy to break. I feel that once the bracket is installed as long as you don't over tighten it that it is pretty much protected by the scupper hole and there for not a issue. really the weak link to the bracket is the plastic threaded rod but once again this is inside the scupper hole so I do not see it as an issue.
Works great for my new 2017 Predator PDL. There is a YouTube video I would recommend for installing , but it is fairly easy an takes about 10 minutes. Nice fit, sealed into scupper nicely, tightens well and a cap snaps over the exposed part inside the kayak to give it a professional look. One thing I would like to add, the first word in the description says: LOWRANCE, which means that is what it fits. Also, one reviewer stated he had to drill two holes. On my kayak ZERO holes had to be drilled, no bracket hung down to shear off and it fit flush enough I did and do not have to worry about any possible damage. I would recommend before you install this on ANY kayak that you check how your transducer fits in your particular scupper area without the bracket, then you ... MoreWorks great for my new 2017 Predator PDL. There is a YouTube video I would recommend for installing , but it is fairly easy an takes about 10 minutes. Nice fit, sealed into scupper nicely, tightens well and a cap snaps over the exposed part inside the kayak to give it a professional look. One thing I would like to add, the first word in the description says: LOWRANCE, which means that is what it fits. Also, one reviewer stated he had to drill two holes. On my kayak ZERO holes had to be drilled, no bracket hung down to shear off and it fit flush enough I did and do not have to worry about any possible damage. I would recommend before you install this on ANY kayak that you check how your transducer fits in your particular scupper area without the bracket, then you have an idea if this is going to work. It pulls it snug, but you have to have the space for the transducer first, this mount doesn't build a suitable space for you. It's a common sense thing. Check what you have and know what you are getting. Good Luck!
