Dowel Pins are a hardened and precisely shaped pin used to keep machine components in accurate alignment they are also used as location guides for adjacent machine parts and to keep the two sections of a punch and die in alignment. For a tight fit your hole should be equal to or slightly smaller than the diameter shown. The length of the dowel pin is the overall measurement Length: Dowel Pins length is measured overall Material / Coating: Black or plain finish is unfinished (bare steel) has no actual protective coating. There may be an oil residue which provides some shelf life but no real corrosion protection when in use. The term “black” is an old industry term for plain. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Dowel Pins are a hardened and precisely shaped pin used to keep machine components in accurate alignment they are also used as location guides for adjacent machine parts and to keep the two sections of a punch and die in alignment. For a tight fit your hole should be equal to or slightly smaller than the diameter shown. The length of the dowel pin is the overall measurement Length: Dowel Pins length is measured overall Material / Coating: Black or plain finish is unfinished (bare steel) has no actual protective coating. There may be an oil residue which provides some shelf life but no real corrosion protection when in use. The term “black” is an old industry term for plain. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Dowel Pins are a hardened and precisely shaped pin used to keep machine components in accurate alignment they are also used as location guides for adjacent machine parts and to keep the two sections of a punch and die in alignment. For a tight fit your hole should be equal to or slightly smaller than the diameter shown. The length of the dowel pin is the overall measurement Length: Dowel Pins length is measured overall Material / Coating: Black or plain finish is unfinished (bare steel) has no actual protective coating. There may be an oil residue which provides some shelf life but no real corrosion protection when in use. The term “black” is an old industry term for plain. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Dowel Pins are a hardened and precisely shaped pin used to keep machine components in accurate alignment they are also used as location guides for adjacent machine parts and to keep the two sections of a punch and die in alignment. For a tight fit your hole should be equal to or slightly smaller than the diameter shown. The length of the dowel pin is the overall measurement Length: Dowel Pins length is measured overall Material / Coating: Black or plain finish is unfinished (bare steel) has no actual protective coating. There may be an oil residue which provides some shelf life but no real corrosion protection when in use. The term “black” is an old industry term for plain. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Last updated at 05/13/2026 00:01:43
M2 X 6mm Metric Dowel Pin Parallel Hardened Plain Din 6325
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
M2 x 6mm Metric Dowel Pin Parallel Hardened Plain DIN 6325
Free delivery between Thu – Mon
originally posted on ebay.com
The item is accurate to the description
originally posted on ebay.com
100mm Pins Im using for the bunk bed. Good.
originally posted on mscdirect.com
No surprises, finish is as expected threads are uniform and smooth.
| Alternative Brands | Hobson Enginnering |
| Brand | Brighton Best |
| Class Grade | High Tensile |
| Closest size in imperial | 5/64" |
| Corrosion Protection Level | Poor |
M2 X 6mm Metric Dowel Pin Parallel Hardened Plain Din 6325
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
M2 x 6mm Metric Dowel Pin Parallel Hardened Plain DIN 6325
Free delivery between Thu – Mon
The item is accurate to the description
100mm Pins Im using for the bunk bed. Good.
No surprises, finish is as expected threads are uniform and smooth.
Listed as a pull out pin but it does not have a threaded end. Just FYI
M4 dowel pins as described.
| Alternative Brands | Hobson Enginnering |
| Brand | Brighton Best |
| Class Grade | High Tensile |
| Closest size in imperial | 5/64" |
| Corrosion Protection Level | Poor |
