The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased, but it is also considerably shorter. At 178mm in length, this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications. Compact Design – for improved handling and control, the overall length has been reduced by 27mm vs. the previous model 3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even, consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) for drilling in masonry up to a maximum 16mm hole diameter. LED Job light – high brightness twin LED job light with pre-glow and after-glow functions. Illuminating the working area for greater visibility during the application High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. 2 Speed Mechanical Gearing – high-speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation All metal gear construction – allow for smoothly transfer of power in high-load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest job site conditions, increasing durability Impact Rate: Hi: 0 - 31,500ipm, Lo: 0 - 8,250ipm Max. drilling capacities in masonry: 16mm Max. drilling capacities in steel: 13mm Max. drilling capacities in wood: Auger bit: 50mm, Self-feeding bit: 76mm, Hole saw: 152mm Max. lock torque: 125Nm Max. tightening torque: Hard: 130Nm, Soft: 65Nm No Load Speed: Hi: 0 - 2,100rpm, Lo: 0 - 550rpm Skin weight: 2.1kg Voltage: 18V Weight (with battery): 2.7kg