Mechpro Blue Low Profile Car Ramp Set Whether you've got the perfect slammed Euro, sport a Rocket Bunny lip on your JDM classic, or just got a little bit enthusiastic with the Makita lowering your Commodore, sooner or later you are going to need to jack your car up to work on it. With minimal ground clearance you can't risk smashing your trolley jack into sill panels or fibreglass lips so you need the convenience and ease of a pair of low profile car ramps. Simply drive your vehicle onto the ramps to provide that extra 63mm of ride height to enable clear access to the jacking points for your trolley jack. There is simply no easier option and the Mechpro Blue Low Profile Car Ramps are the solution to your woes! These ramps are designed to not slide forward when driven onto, have a lip on the edge so you don't drive off the ramp and are very lightweight. Specifications: Working Load Limit: 1000kg per ramp Maximum tyre width: 250mm Maximum tyre diameter: 760mm Length: 700mm Maximum Height: 80mm Width: 200mm Net Weight: 2.94kg per pair Repco have an impressive range of axle stands & ramps as well as garage and trolley jacks to ensure that anytime you need to work on your car you have the right equipment handy to keep your vehicle elevated and stable.
Mechpro Blue Low Profile Car Ramp Set Whether you've got the perfect slammed Euro, sport a Rocket Bunny lip on your JDM classic, or just got a little bit enthusiastic with the Makita lowering your Commodore, sooner or later you are going to need to jack your car up to work on it. With minimal ground clearance you can't risk smashing your trolley jack into sill panels or fibreglass lips so you need the convenience and ease of a pair of low profile car ramps. Simply drive your vehicle onto the ramps to provide that extra 63mm of ride height to enable clear access to the jacking points for your trolley jack. There is simply no easier option and the Mechpro Blue Low Profile Car Ramps are the solution to your woes! These ramps are designed to not slide forward when driven onto, have a lip on the edge so you don't drive off the ramp and are very lightweight. Specifications: Working Load Limit: 1000kg per ramp Maximum tyre width: 250mm Maximum tyre diameter: 760mm Length: 700mm Maximum Height: 80mm Width: 200mm Net Weight: 2.94kg per pair Repco have an impressive range of axle stands & ramps as well as garage and trolley jacks to ensure that anytime you need to work on your car you have the right equipment handy to keep your vehicle elevated and stable.
Mechpro Blue Low Profile Car Ramp Set Whether you've got the perfect slammed Euro, sport a Rocket Bunny lip on your JDM classic, or just got a little bit enthusiastic with the Makita lowering your Commodore, sooner or later you are going to need to jack your car up to work on it. With minimal ground clearance you can't risk smashing your trolley jack into sill panels or fibreglass lips so you need the convenience and ease of a pair of low profile car ramps. Simply drive your vehicle onto the ramps to provide that extra 63mm of ride height to enable clear access to the jacking points for your trolley jack. There is simply no easier option and the Mechpro Blue Low Profile Car Ramps are the solution to your woes! These ramps are designed to not slide forward when driven onto, have a lip on the edge so you don't drive off the ramp and are very lightweight. Specifications: Working Load Limit: 1000kg per ramp Maximum tyre width: 250mm Maximum tyre diameter: 760mm Length: 700mm Maximum Height: 80mm Width: 200mm Net Weight: 2.94kg per pair Repco have an impressive range of axle stands & ramps as well as garage and trolley jacks to ensure that anytime you need to work on your car you have the right equipment handy to keep your vehicle elevated and stable.
Mechpro Blue Low Profile Car Ramp Set Whether you've got the perfect slammed Euro, sport a Rocket Bunny lip on your JDM classic, or just got a little bit enthusiastic with the Makita lowering your Commodore, sooner or later you are going to need to jack your car up to work on it. With minimal ground clearance you can't risk smashing your trolley jack into sill panels or fibreglass lips so you need the convenience and ease of a pair of low profile car ramps. Simply drive your vehicle onto the ramps to provide that extra 63mm of ride height to enable clear access to the jacking points for your trolley jack. There is simply no easier option and the Mechpro Blue Low Profile Car Ramps are the solution to your woes! These ramps are designed to not slide forward when driven onto, have a lip on the edge so you don't drive off the ramp and are very lightweight. Specifications: Working Load Limit: 1000kg per ramp Maximum tyre width: 250mm Maximum tyre diameter: 760mm Length: 700mm Maximum Height: 80mm Width: 200mm Net Weight: 2.94kg per pair Repco have an impressive range of axle stands & ramps as well as garage and trolley jacks to ensure that anytime you need to work on your car you have the right equipment handy to keep your vehicle elevated and stable.
Last updated at 06/09/2026 16:36:33
Mechpro Low Profile Car Ramps Set 2000kg - MPBLPR
Delivery $12
Mechpro Low Profile Car Ramp Set MPBLPR
Delivery between 15–23 June $9.90
Mechpro Low Profile Car Ramp Set Mpblpr
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
originally posted on repco.com.au
Excellent for making room under a lowered car for a jack. Small enough to go under the sills (i.e. backing onto them with the front wheels or driving on with the back wheels).The only issue is that the honeycomb design is a pre-fab spider home. If storing outside or in a funnel web-friendly shed, it might be worth filling the holes with expanding foam and cutting that flush with the top and bottom so they don't get much heavier but also don't fill up with spiders between uses.
originally posted on repco.com.au
If what you're looking for is a sturdy set of ramps you can drive your car up onto so that you have enough room to roll a jack under it, you won't do better than this. That's exactly what they're for, it's exactly what they do, and you're not paying any extra for any unnecessary bells and whistles.The product is basically a couple of cheap plastic ramps that look like they were designed and built by the same guy that came up with the milk crate. They have a few key features - a honeycomb grid for strength and rigidity, but with holes for lightness, portability and ease of drainage/cleaning, and a slight dip and lip at the top so that the car has an obvious resting point and, when you're behind the wheel, you can feel when it's time to stop.If you don't want to ... MoreIf what you're looking for is a sturdy set of ramps you can drive your car up onto so that you have enough room to roll a jack under it, you won't do better than this. That's exactly what they're for, it's exactly what they do, and you're not paying any extra for any unnecessary bells and whistles.The product is basically a couple of cheap plastic ramps that look like they were designed and built by the same guy that came up with the milk crate. They have a few key features - a honeycomb grid for strength and rigidity, but with holes for lightness, portability and ease of drainage/cleaning, and a slight dip and lip at the top so that the car has an obvious resting point and, when you're behind the wheel, you can feel when it's time to stop.If you don't want to spend much, but you want something slightly better than the two by four cutoffs you've been using so far, these are a great upgrade.
originally posted on repco.com.au
Lightweight and sturdy, I use these when detailing my car to reduce the amount of bending. Perfect for the job.
| Length (cm) | 70 |
| Warranty | Manufacturers Warranty |
Mechpro Low Profile Car Ramps Set 2000kg - MPBLPR
Delivery $12
Mechpro Low Profile Car Ramp Set MPBLPR
Delivery between 15–23 June $9.90
Mechpro Low Profile Car Ramp Set Mpblpr
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Excellent for making room under a lowered car for a jack. Small enough to go under the sills (i.e. backing onto them with the front wheels or driving on with the back wheels).The only issue is that the honeycomb design is a pre-fab spider home. If storing outside or in a funnel web-friendly shed, it might be worth filling the holes with expanding foam and cutting that flush with the top and bottom so they don't get much heavier but also don't fill up with spiders between uses.
If what you're looking for is a sturdy set of ramps you can drive your car up onto so that you have enough room to roll a jack under it, you won't do better than this. That's exactly what they're for, it's exactly what they do, and you're not paying any extra for any unnecessary bells and whistles.The product is basically a couple of cheap plastic ramps that look like they were designed and built by the same guy that came up with the milk crate. They have a few key features - a honeycomb grid for strength and rigidity, but with holes for lightness, portability and ease of drainage/cleaning, and a slight dip and lip at the top so that the car has an obvious resting point and, when you're behind the wheel, you can feel when it's time to stop.If you don't want to ... MoreIf what you're looking for is a sturdy set of ramps you can drive your car up onto so that you have enough room to roll a jack under it, you won't do better than this. That's exactly what they're for, it's exactly what they do, and you're not paying any extra for any unnecessary bells and whistles.The product is basically a couple of cheap plastic ramps that look like they were designed and built by the same guy that came up with the milk crate. They have a few key features - a honeycomb grid for strength and rigidity, but with holes for lightness, portability and ease of drainage/cleaning, and a slight dip and lip at the top so that the car has an obvious resting point and, when you're behind the wheel, you can feel when it's time to stop.If you don't want to spend much, but you want something slightly better than the two by four cutoffs you've been using so far, these are a great upgrade.
Lightweight and sturdy, I use these when detailing my car to reduce the amount of bending. Perfect for the job.
Good set of low profile ramps, even with a low profile floor jack I still needed that little bit extra clearance, these were well made and a great price.
Easy online purchase with the item shipped the same day.The ramps are perfect for my needs. The car rolls on easily and sits nicely at he top. Perfect for getting a jack under the from of my track car. The ramps are light and portable and a great upgrade to the bit of timber I was using before. Good price too.
Great low car ramps that can fit under body kit and bumpers easily, easily lifts car to fit a jack under a subframe or even change the oil under a car.
These ramps are perfect for trying to get my trolley jack under my lowered Fairlane would highly recommend these ramps
For me as a first time repco online shopper, I will not do it again ever.Ordered it Nov.27 2022 and until now the item is still in progress...looks like no progress.Good job RECKPCO.
The right tool for the job!My car is lowered and these mean I can get the car up enough to do oils and fluids without the drama of jacks and stands.Great price for how much impact they’ve had on time and efficiency in the garage.10/10
Used them about 30 or 40 times over the last couple months I got them, and they're still holding up as they should.
| Length (cm) | 70 |
| Warranty | Manufacturers Warranty |
