The Milwaukee 48-22-2761 11in1 Screwdriver SQ is the ideal tool for driving screws. It has a tri-lobe handle that provides a secure grip and also makes it easy to rotate the screwdriver while in use. The 11-in-1 design allows you to store all your bits in one place so you can access them easily when needed. The Milwaukee Multi-Bit Screwdriver SQ is the ideal solution for any job that requires you to drive screws.
The Milwaukee 48-22-2761 11in1 Screwdriver SQ is the ideal tool for driving screws. It has a tri-lobe handle that provides a secure grip and also makes it easy to rotate the screwdriver while in use. The 11-in-1 design allows you to store all your bits in one place so you can access them easily when needed. The Milwaukee Multi-Bit Screwdriver SQ is the ideal solution for any job that requires you to drive screws.
The Milwaukee 48-22-2761 11in1 Screwdriver SQ is the ideal tool for driving screws. It has a tri-lobe handle that provides a secure grip and also makes it easy to rotate the screwdriver while in use. The 11-in-1 design allows you to store all your bits in one place so you can access them easily when needed. The Milwaukee Multi-Bit Screwdriver SQ is the ideal solution for any job that requires you to drive screws.
The Milwaukee 48-22-2761 11in1 Screwdriver SQ is the ideal tool for driving screws. It has a tri-lobe handle that provides a secure grip and also makes it easy to rotate the screwdriver while in use. The 11-in-1 design allows you to store all your bits in one place so you can access them easily when needed. The Milwaukee Multi-Bit Screwdriver SQ is the ideal solution for any job that requires you to drive screws.
Last updated at 06/09/2026 16:51:11
Milwaukee 11-in-1 Multi-Tip Screwdriver with Square Drive Bits and 13-in-1 Multi-Tip Cushion Grip Screwdriver Sets (48-22-2880-2761)
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
(O) 11-IN-1 MULTI BIT DRIVER
Delivery $15
Milwaukee 11in1 Multi-bit Screwdriver
Delivery between 16–19 June $14.50
originally posted on homedepot.com
The 11 and 1 is a good tool to use. It's very handy to have the only problem with is it when you lose a tip you've lost a tip. There's no getting just the tips replaced so you end up having to buy a whole new screwdriver. This gets expensive in the long run. If you could get replacement tips and be a lot better product.
originally posted on homedepot.com
I bought this to replace a similar Milwaukee Multi-Tip Screwdriver that has mysteriously disappeared. I like this one even better than my old one. Not only does it have screwdriver bits that I use frequently, but also commonly found Torx and nut driver sizes. It also has a more comfortable tri-lobe handle which feels more ergonomic.
originally posted on homedepot.com
Milwaukees Multi tip is a good tool to have. Its affordability and design are great. WIll last long if you dont abuse it and use it for other purposes than what its meant to do. The 5/16 socket always comes in handy on the field.
| Variant | |
| title | Default Title |
Milwaukee 11-in-1 Multi-Tip Screwdriver with Square Drive Bits and 13-in-1 Multi-Tip Cushion Grip Screwdriver Sets (48-22-2880-2761)
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
(O) 11-IN-1 MULTI BIT DRIVER
Delivery $15
Milwaukee 11in1 Multi-bit Screwdriver
Delivery between 16–19 June $14.50
The 11 and 1 is a good tool to use. It's very handy to have the only problem with is it when you lose a tip you've lost a tip. There's no getting just the tips replaced so you end up having to buy a whole new screwdriver. This gets expensive in the long run. If you could get replacement tips and be a lot better product.
I bought this to replace a similar Milwaukee Multi-Tip Screwdriver that has mysteriously disappeared. I like this one even better than my old one. Not only does it have screwdriver bits that I use frequently, but also commonly found Torx and nut driver sizes. It also has a more comfortable tri-lobe handle which feels more ergonomic.
Milwaukees Multi tip is a good tool to have. Its affordability and design are great. WIll last long if you dont abuse it and use it for other purposes than what its meant to do. The 5/16 socket always comes in handy on the field.
Hands down, this is the best multi-function driver on the market. I have 3 of them and keep them in toolboxes and vehicles to have one on me at all times. The multi purpose and function has saved me so many times on important jobs. I love how the slots that hold the bits also act as drivers for small nuts. Hands down great tool!
A truly versatile screwdriver.Everything stores in the driver shank; 2) slotted, 2) phillips (#1 & #2), 2) square bits, 2) Torx (#10 & #15), then the shank also has 1/4" nut driver and 5/16" nut driver on one end and 3/8" on the other end.Nearly an entire toolbox of drivers in one handle and no fumbling with loose driver bits that are usually stored in the driver handle cavity. These all store right in the shank. To change bits just flip the tip or the shank.Also added is a wire loop hole for wiring solid wire (down to 12 ga. solid wire).This driver is easily an electricians best tool but is great for anyone that wants most driver bits in one driver and fits in your pocket.A very comfortable handle grip!About 8 inches overall length.
I love this tool! The feel and weight in-hand is good. The handle shape and the rubber partial coating makes it really easy to get a grip and twist. The rubber coating is also the one down side for me-I put my hand tools into my back pockets often, especially when up on a ladder; the rubber coating means I have to be a little bit more intentional about it when I put it in my pocket, but that's a small thing for the convenience this tool offers. The nut drivers are really well integrated into the tool. I like that the ¼" on one of the inserts is really thin-walled, allowing me to get to recessed nuts on a few motion-activated floodlights I have been switching out. That's a small thing, but I like not scratching the painted surface on the fixture with pliers. They put ... MoreI love this tool! The feel and weight in-hand is good. The handle shape and the rubber partial coating makes it really easy to get a grip and twist. The rubber coating is also the one down side for me-I put my hand tools into my back pockets often, especially when up on a ladder; the rubber coating means I have to be a little bit more intentional about it when I put it in my pocket, but that's a small thing for the convenience this tool offers. The nut drivers are really well integrated into the tool. I like that the ¼" on one of the inserts is really thin-walled, allowing me to get to recessed nuts on a few motion-activated floodlights I have been switching out. That's a small thing, but I like not scratching the painted surface on the fixture with pliers. They put a small hole in the shaft for bending a loop in wire-it's such a small thing, but it's so handy. Regular drill-driver bits will fit in case of blowing out a bit or dropping one, but they sit a little bit deeper than I'd like. That's not a big deal, and I have yet to strip out a bit, but as will all bits they fail eventually. Luckily the tool comes as a two-pack, and they're inexpensive enough to replace when needed. This is going to be my go-to small Christmas present to people this year. It's stocking-stuffer size if you give just one, and keep the other for your kitchen drawer, and get another set to put in each glove box you're around, etc. I keep one in my closet for the little things on that side of the house. It sounds lazy, but there are things I have disregarded because I didn't want to go to the other side of the house to grab a screwdriver from the garage. I'm a big fan, and come Christmas time, we'll have more fans in my immediate circle.
This screwdriver is probably best used by someone who's going to leave it in the junk drawer, and pull it out occasionally to use on minor tasks around the house like tightening screws in a chair or a desk. Bought it to save me lugging around a lot of drivers at work, but it's unreliable in a professional setting. The bits aren't magnetic and fall out very easily and frequently; even just walking around with it in my hand that has happened. At $10, it's fine for home use, and not much else.
Offers all commonly used bits. Good grip on handle. Would be great if it came with a little something to keep the bits together. Only complaint is that it was so difficult to open the package. Hard plastic sliced into my thumb trying to open it.
The screwdriver works well across all aspects it provides in it's design. I use it daily as a HVAC Service Technician. I find it hard to find anything wrong with this driver it compares very well if not better than my Klein which I think it's an 11in1 driver I don't remember. But the reason I say that is because of a couple of reasons for one it has the loop maker my Klein does not so, maybe they have a new one that has it but I do not. For two its designed so the handle is a little bigger so for my hands I get morr surface to grip and turn. Also the triangle design is similar to my Matco screwdrivers which allows you to get more torque on the driver. For three its Milwaukee and I love their products and quality so far. The last one is kind of a con and a pro the ... MoreThe screwdriver works well across all aspects it provides in it's design. I use it daily as a HVAC Service Technician. I find it hard to find anything wrong with this driver it compares very well if not better than my Klein which I think it's an 11in1 driver I don't remember. But the reason I say that is because of a couple of reasons for one it has the loop maker my Klein does not so, maybe they have a new one that has it but I do not. For two its designed so the handle is a little bigger so for my hands I get morr surface to grip and turn. Also the triangle design is similar to my Matco screwdrivers which allows you to get more torque on the driver. For three its Milwaukee and I love their products and quality so far. The last one is kind of a con and a pro the bits don't slide out as easily as the Klein which I like because when I'm really putting pressure on it to screw something it especially with the torx the bit it can get wedged in the screw which when I pull the driver back the bit can fall out and wherever I'm working in or around the unit it can fall in places I can not access without taking about everything around it so that I like but it still happens just not as much as my Klein. I know it needs to be loose so you can switch it easily I just wish there was a way to lock the bits in and the insert peices the bits go into. Other than that an amazing product and I recommend it.
This 11 in 1 is not worth the $$ to MAKE let alone buy. All the bits, which each are about 3/4" big (read: easy to lose), get stuck in the particular screw you are turning. And since the flippable adapters don't actually LOCK IN, as soon as you're done tightening or loosening the screw, you pull back, and OOPS! There goes your bit, or worse, adapter. The main shaft, which holds all the flippable bits, ALSO doesn't lock in, and that has easily pulled out.
| Variant | |
| title | Default Title |
