Super smooth action. Handle rotates easily on the shaft, but what's remarkable is the geometry - the tip barely moves as you spin the handle. An excellent update of an old-fashioned tool. It's like an electric screwdriver with all the 'feel' of a manual one.

Seems well built and works ok..... but the multi-bit tends to get "stuck" in the receptacle or switch 6/32 screws I'm using it with.... thus it gets pulled out, either fully or partially. Which in turn leads to the bit getting temporary lost or at least dropped.So a good idea, that just doesn't work in practice.... I've already gone back to using my dedicated Slotted or Philips versions of this.

Handy tool but the off set is not deep enough. Lots of tiny turns to get the job done. I have seen other tools like this with more curve so less rotating. Still, it gets the job done.

[Rewarded Review] Handy screw driver for quick repetitive work...

Milwaukee Rotating 2 in 1 Multi-Bit Driver is a new screwdriver design I haven't seen before. It uses hex-end driver bits held in a magnetic holder that is attached to the driver shaft and has an overall length of about 10 - inches to the end of the handle. The 2 in 1 in the description refers to a two sided bit included, #2 Philip and 3/16 - inch flat end, but it will accept standard hex-end bits. What makes it different, it has an angle in the shaft for rotation turning the the bit two times with every rotation of the handle. It's quicker and more comfortable when repetitively driving screws all day on the job. The rotating screw driver turns in both directions forward or reverse like a common screwdriver. Tried it out and works fine, and will come in handy on the ... MoreMilwaukee Rotating 2 in 1 Multi-Bit Driver is a new screwdriver design I haven't seen before. It uses hex-end driver bits held in a magnetic holder that is attached to the driver shaft and has an overall length of about 10 - inches to the end of the handle. The 2 in 1 in the description refers to a two sided bit included, #2 Philip and 3/16 - inch flat end, but it will accept standard hex-end bits. What makes it different, it has an angle in the shaft for rotation turning the the bit two times with every rotation of the handle. It's quicker and more comfortable when repetitively driving screws all day on the job. The rotating screw driver turns in both directions forward or reverse like a common screwdriver. Tried it out and works fine, and will come in handy on the job.

[Rewarded Review] Handy screwdriver

The Milwaukee 2 in 1 rotating muti-bit screwdriver is very handy to have. Often called a speed driver they are great to use for putting in screws very quickly where there is little resistance. They are great for putting in light switches, outlets and faceplate's and a like items. This one is very handy in the way that you can use your regular 1/4" hex bits in it and not have to have a bunch of different styles.

[Rewarded Review] Much faster and easier than a standard screwdriver

I have seen these in use before and decided it was time to own one of my own. This Milwaukee 2-in-1 Rotating Multi-Bit Screwdriver has a standard 1/4 inch hex end with magnetic holder that will work with any standard 1/4 inch bit. It comes with a two sided bit that is Phillips #2 on one side and Slotted 3/16 inch on the other. You will not necessarily get a lot of torque with this driver but you will get speed and when you are trying to fasten long screws or repetitively fasten screws for hours, you will be much happier using this product. The rotation happens at the handle side. The angle of the shaft allows one to spin in a screw with one hand but you will be more stable using two, especially with slotted screws. The handle is cushion grip which helps reduce hand ... MoreI have seen these in use before and decided it was time to own one of my own. This Milwaukee 2-in-1 Rotating Multi-Bit Screwdriver has a standard 1/4 inch hex end with magnetic holder that will work with any standard 1/4 inch bit. It comes with a two sided bit that is Phillips #2 on one side and Slotted 3/16 inch on the other. You will not necessarily get a lot of torque with this driver but you will get speed and when you are trying to fasten long screws or repetitively fasten screws for hours, you will be much happier using this product. The rotation happens at the handle side. The angle of the shaft allows one to spin in a screw with one hand but you will be more stable using two, especially with slotted screws. The handle is cushion grip which helps reduce hand fatigue and it also has a lanyard hole for a tether if you are working up on a ladder, etc. Considering the product has a limited lifetime warranty, it is worth adding to your tool bag!

[Rewarded Review] Nifty Little Tool

I've seen these types of off-set rotating screwdrivers for a while but I never thought it would be useful enough to buy one. When Home Depot offered me this Milwaukee 2-in-1 Rotating Multi-Bit Screwdriver as part of a promotion I decided to try one. Let me tell you, if you don't have your battery powered screwdriver near you grab this guy out of your pouch. I do a lot of outlets and switches and my old arthritic fingers don't like twisting a standard screwdriver. This goofy little thing works great, and it's fast. The included 2 sided bit takes care of common faceplate screws and the Phillips side handles the rest. I use an Ecx bit for final tightening. They even thought to put a hole through the handle for easy hanging. Add one of these to your electrical pouch, ... MoreI've seen these types of off-set rotating screwdrivers for a while but I never thought it would be useful enough to buy one. When Home Depot offered me this Milwaukee 2-in-1 Rotating Multi-Bit Screwdriver as part of a promotion I decided to try one. Let me tell you, if you don't have your battery powered screwdriver near you grab this guy out of your pouch. I do a lot of outlets and switches and my old arthritic fingers don't like twisting a standard screwdriver. This goofy little thing works great, and it's fast. The included 2 sided bit takes care of common faceplate screws and the Phillips side handles the rest. I use an Ecx bit for final tightening. They even thought to put a hole through the handle for easy hanging. Add one of these to your electrical pouch, you won't be disappointed.Milwaukee offers a Limited Lifetime Warranty and Home Depot has their very generous 90 day return policy.