Pair of heavy duty side clamping speaker wall mount brackets for medium to large bookshelf speakers, satellite speakers and studio monitors, surround sound speakers and amplified speakers weighing less than 25kg/55lbs. Built for heavy speakers, bookshelf speakers, surround sound or even lighter smaller speakers. The width of the speakers should be between 5.4. Fits yamaha, bose, klipsch, polk, onkyo, sony and other brand speakers. Constructed with solid steel and decorated with abs cover and cable management, it presents an elegant look especially when installed at home. Curved speaker base can tilt 7.5 Deg down and swivel 180 deg left/right to deliver ideal sound conditions. Base is padded speaker protection. The speaker can be easily installed with front and side holding clamps on the mount and it puts the speakers 11 inches from the wall to give large space for installation.
Pair of heavy duty side clamping speaker wall mount brackets for medium to large bookshelf speakers, satellite speakers and studio monitors, surround sound speakers and amplified speakers weighing less than 25kg/55lbs. Built for heavy speakers, bookshelf speakers, surround sound or even lighter smaller speakers. The width of the speakers should be between 5.4. Fits yamaha, bose, klipsch, polk, onkyo, sony and other brand speakers. Constructed with solid steel and decorated with abs cover and cable management, it presents an elegant look especially when installed at home. Curved speaker base can tilt 7.5 Deg down and swivel 180 deg left/right to deliver ideal sound conditions. Base is padded speaker protection. The speaker can be easily installed with front and side holding clamps on the mount and it puts the speakers 11 inches from the wall to give large space for installation.
Pair of heavy duty side clamping speaker wall mount brackets for medium to large bookshelf speakers, satellite speakers and studio monitors, surround sound speakers and amplified speakers weighing less than 25kg/55lbs. Built for heavy speakers, bookshelf speakers, surround sound or even lighter smaller speakers. The width of the speakers should be between 5.4. Fits yamaha, bose, klipsch, polk, onkyo, sony and other brand speakers. Constructed with solid steel and decorated with abs cover and cable management, it presents an elegant look especially when installed at home. Curved speaker base can tilt 7.5 Deg down and swivel 180 deg left/right to deliver ideal sound conditions. Base is padded speaker protection. The speaker can be easily installed with front and side holding clamps on the mount and it puts the speakers 11 inches from the wall to give large space for installation.
Pair of heavy duty side clamping speaker wall mount brackets for medium to large bookshelf speakers, satellite speakers and studio monitors, surround sound speakers and amplified speakers weighing less than 25kg/55lbs. Built for heavy speakers, bookshelf speakers, surround sound or even lighter smaller speakers. The width of the speakers should be between 5.4. Fits yamaha, bose, klipsch, polk, onkyo, sony and other brand speakers. Constructed with solid steel and decorated with abs cover and cable management, it presents an elegant look especially when installed at home. Curved speaker base can tilt 7.5 Deg down and swivel 180 deg left/right to deliver ideal sound conditions. Base is padded speaker protection. The speaker can be easily installed with front and side holding clamps on the mount and it puts the speakers 11 inches from the wall to give large space for installation.
Last updated at 03/21/2026 05:57:33
Speaker Wall Mounts W/ Sliding Clamps (pair)
Delivery $55.60
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Mount-It! Speaker Wall Mounts, Pair of Universal Side Clamping Bookshelf Speaker Mounting Brackets, Large or Small Speakers, 2 Mounts, 55 Lbs Capacity
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Mount-It! Speaker Wall Mounts, Pair of Universal Side Clamping Bookshelf Speaker Mounting Brackets, Large or Small Speakers, 2 Mounts, 55 Lbs Capacity
Delivery between 27–30 Mar $29
originally posted on mount-it.com
I could not have been happier! Solid build quality and paint. Great look! Tip of cap to engineering as cushioned clamps lovingly hold speaker. Easily adjusted for speaker toe in as well. The mounts do stick out but shouldn't they especially for rear ported speakers? Fair pricing. I successfully used dry wall anchors as studs unavailable. Friendly suggestion to Mount-It... include eight (8) fender washers or include four more SMALLER holes per bracket for those using dry wall anchors with smaller screw heads.I NEVER take the time to write reviews but a winner such as this deserves props!
originally posted on ebay.com
I really was sceptical on clicking buy now because of the extremely low cost with free shipping but I figured what can I loose. I have 2 Klipsch RM 15 bookshelf speakers that are relatively heavy and I wanted to hang them in the two corners of my room for surround sound. I read through the very understandable directions a couple of times and to my surprise they were extreemly easy to assemble and mount to the wall. I would very much recommend finding the studs and using them for a secure anchor but if a wall stud is not available I would highly recommend purchasing a package of 50lbs or even 100lbs drywall anchors instead of the supplied light duty plastic ones. I took about a hour for installation for both mounts with speakers.. I am a very satisfied customer
originally posted on mount-it.com
These speaker mounts are one of the best purchases that I have made in a long time. Fairly easy to mount (just have to have a stud-finder), and securely holds a mid-sized heavy weight speaker. The mount also allows for positioning the speaker in a wide range of positions. These mounts are also well designed and very sturdy since they are made from solid metal. Nope, you can’t go wrong buying these speaker mounts, they are buy far the best I could find on the internet. They exceeded all of my expectations and I would definitely buy them again.
| Compatible Devices | Speakers |
| Colour Screen | No |
| Batteries Included | No |
| Batteries Required | No |
| Mounting type | Wall Mount |
Speaker Wall Mounts W/ Sliding Clamps (pair)
Delivery $55.60
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Mount-It! Speaker Wall Mounts, Pair of Universal Side Clamping Bookshelf Speaker Mounting Brackets, Large or Small Speakers, 2 Mounts, 55 Lbs Capacity
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Mount-It! Speaker Wall Mounts, Pair of Universal Side Clamping Bookshelf Speaker Mounting Brackets, Large or Small Speakers, 2 Mounts, 55 Lbs Capacity
Delivery between 27–30 Mar $29
I could not have been happier! Solid build quality and paint. Great look! Tip of cap to engineering as cushioned clamps lovingly hold speaker. Easily adjusted for speaker toe in as well. The mounts do stick out but shouldn't they especially for rear ported speakers? Fair pricing. I successfully used dry wall anchors as studs unavailable. Friendly suggestion to Mount-It... include eight (8) fender washers or include four more SMALLER holes per bracket for those using dry wall anchors with smaller screw heads.I NEVER take the time to write reviews but a winner such as this deserves props!
I really was sceptical on clicking buy now because of the extremely low cost with free shipping but I figured what can I loose. I have 2 Klipsch RM 15 bookshelf speakers that are relatively heavy and I wanted to hang them in the two corners of my room for surround sound. I read through the very understandable directions a couple of times and to my surprise they were extreemly easy to assemble and mount to the wall. I would very much recommend finding the studs and using them for a secure anchor but if a wall stud is not available I would highly recommend purchasing a package of 50lbs or even 100lbs drywall anchors instead of the supplied light duty plastic ones. I took about a hour for installation for both mounts with speakers.. I am a very satisfied customer
These speaker mounts are one of the best purchases that I have made in a long time. Fairly easy to mount (just have to have a stud-finder), and securely holds a mid-sized heavy weight speaker. The mount also allows for positioning the speaker in a wide range of positions. These mounts are also well designed and very sturdy since they are made from solid metal. Nope, you can’t go wrong buying these speaker mounts, they are buy far the best I could find on the internet. They exceeded all of my expectations and I would definitely buy them again.
High quality product, well manufactured. Excellent instructions and installation flexibility. Fits a wide range of shelf speakers, but u should measure thoroughly
Just installed this speaker mount for my 5.1 surround sound. I only needed one mount for my center speaker. It's well made and easily installed. Came with everything needed for the install. It's heavier than i expected. The only thing is the mounts do stick out further than I would like but it does do a good job for it's purpose just wished it was more flush. Otherwise its a good product.
They're nice and clean brackets for your speakers. My bookshelf units fit easily and the installation was simple. If you're using drywall only to secure these, I'd recommend better wall anchors than what come with the kit. I went with the Toggler brand anchors for peace of mind.
A very well constructed and designed swivel/tilt bracket that firmly holds these relatively large "bookshelf" speakers. Used these for Front L&R and Rear L&R speakers. Nicely packaged with all necessary mounting hardware. Used the 5 small screws per speaker/bracket to securely hold the RP-600M in the mount. If you use these on a similarly large speaker, be sure to position the speaker far enough forward in the mount so that when tilting and swiveling it will clear the "Plastic Cover" that slides over the wall mount flange. I attached these to the wood studs using 1/4" X 3" lag bolts.
The brackets seem strong and should do the job well. I don't have any concerns that they cannot hold my speakers, which weight 11 lbs (5kg) each. I received a good supply of fasteners with the brackets. One of the mounting screws was faulty, but since I was screwing into wall studs I only used 2 per side and the 4 per side allowed for plenty of extras. The plastic covers to go over the wall mounting brackets are plastic but look OK. I was concerned about breaking them as I tried to slip them over the speaker wire I had thread through the holes for the hidden wire installation. They really pinched the wires. You could wait to thread the wire after putting on the cover, but that would be difficult. Also, I used a 13mm socket to tighten the bottom nut rather than the ... MoreThe brackets seem strong and should do the job well. I don't have any concerns that they cannot hold my speakers, which weight 11 lbs (5kg) each. I received a good supply of fasteners with the brackets. One of the mounting screws was faulty, but since I was screwing into wall studs I only used 2 per side and the 4 per side allowed for plenty of extras. The plastic covers to go over the wall mounting brackets are plastic but look OK. I was concerned about breaking them as I tried to slip them over the speaker wire I had thread through the holes for the hidden wire installation. They really pinched the wires. You could wait to thread the wire after putting on the cover, but that would be difficult. Also, I used a 13mm socket to tighten the bottom nut rather than the supplied wrench, but still some of the black paint came off the nut, so be careful or plan to paint (or use magic marker) on the nuts after installation. The thin foam pads that clamp the speakers seem to hold the speakers firm, even with my having them tilting all the way forward. However as others have noted, I will check them periodically to see if the speakers are slipping, as I did not use a screw into the speakers to supply extra security. I installed 75 watt Klipsch Synergy B-2 bookshelf speakers (12.5" H, 7" W, 8" D) (used as my rear channels) and they seem to be held very securely.My only reason to not give 5 stars was the delay in delivery. After submitting my order, I did not receive any confirmation that the mounts had been shipped after several weeks.Then when I sent an email as recommended on their web site, I received a response that asked for my order information, etc., which I had already given in my email to them. Either an automatic response or a person that didn't read my email. Either way, a cheesy non-responsive exchange. Without a proper response to my help inquiry, I finally did get an email that the mounts had shipped from California. They then came within about a week.Summary, good product, bad customer service.
For the price these speaker mounts, I feel, can't be beat. I am using them to hold heavy, nine inch wide speakers and they do the job well. Find a wall stud and no problem supporting them. They are also adjustable, to an extent, for left right and up and down.
Really solid, strong and versatile speaker mounts. Easy to install, easily adjustable for different widths, nice looking and holds the speakers very securely. I love 'em!
| Compatible Devices | Speakers |
| Colour Screen | No |
| Batteries Included | No |
| Batteries Required | No |
| Mounting type | Wall Mount |
