The Pelican 1550 Case has a unique design incorporates a sophisticated pressure valve that allows for equal air pressure inside that case, but prevents water molecules from entering. The latch system allows for quick and easy access to the contents and a when closed maintains a tight seal. The case itself is very durable and is constructed with a very tough Co-polymer Polypropylene. Its internal space is 47.3 x 36 x 19.3 cm. The Pelican 1550 external dimensions are 52.5 x 43.7 x 21.3 cm. The case offers a base depth of 14.9 cm and the lid depth of 4.4 cm. A overall weight of just 5.4 kg (with Foam) makes it the light weight case solution you have been looking for.
The Pelican 1550 Case has a unique design incorporates a sophisticated pressure valve that allows for equal air pressure inside that case, but prevents water molecules from entering. The latch system allows for quick and easy access to the contents and a when closed maintains a tight seal. The case itself is very durable and is constructed with a very tough Co-polymer Polypropylene. Its internal space is 47.3 x 36 x 19.3 cm. The Pelican 1550 external dimensions are 52.5 x 43.7 x 21.3 cm. The case offers a base depth of 14.9 cm and the lid depth of 4.4 cm. A overall weight of just 5.4 kg (with Foam) makes it the light weight case solution you have been looking for.
The Pelican 1550 Case has a unique design incorporates a sophisticated pressure valve that allows for equal air pressure inside that case, but prevents water molecules from entering. The latch system allows for quick and easy access to the contents and a when closed maintains a tight seal. The case itself is very durable and is constructed with a very tough Co-polymer Polypropylene. Its internal space is 47.3 x 36 x 19.3 cm. The Pelican 1550 external dimensions are 52.5 x 43.7 x 21.3 cm. The case offers a base depth of 14.9 cm and the lid depth of 4.4 cm. A overall weight of just 5.4 kg (with Foam) makes it the light weight case solution you have been looking for.
The Pelican 1550 Case has a unique design incorporates a sophisticated pressure valve that allows for equal air pressure inside that case, but prevents water molecules from entering. The latch system allows for quick and easy access to the contents and a when closed maintains a tight seal. The case itself is very durable and is constructed with a very tough Co-polymer Polypropylene. Its internal space is 47.3 x 36 x 19.3 cm. The Pelican 1550 external dimensions are 52.5 x 43.7 x 21.3 cm. The case offers a base depth of 14.9 cm and the lid depth of 4.4 cm. A overall weight of just 5.4 kg (with Foam) makes it the light weight case solution you have been looking for.
Last updated at 06/06/2026 05:33:05
Pelican 1550 Case without Foam (Black)
Delivery $9.90
Pelican 1550 Case without Foam (Orange)
Delivery $8.90
Pelican 1550 Case without Foam (Yellow)
Delivery $8.90
Pelican 1550NF Case without Foam (Olive Drab Green)
Delivery $8.90
Pelican 1550 Case without Foam (Silver)
Delivery $8.90
Pelican 1550 Case Without Foam Black
Delivery between 10–18 June $15
Pelican 1550 Case with Foam - Yellow
Delivery between 10–18 June $15
Pelican 1550 Case With Foam Black
Delivery between 10–18 June $15
Pelican Case 1550 No Foam Black
Delivery $9.90
Pelican Case 1550 No Foam Yellow
Delivery $9.90
originally posted on bhphotovideo.com
A very useful piece of equipment to anyone wanting to protect valuable tools of any trade really. I was referred to B&H by a buddy into photography, but my hobby is RC Helis which brings me to--> My 1550 sees duty as the enclosure for a 1000watt multi-chem battery charger and the dual server power supplies that run it. At no time have I ever felt that the equipment inside was in danger of damage from water or impacts. Tbh, I used it to win a safe bet that I wouldn't toss the case, electronics included, into a pool. Of course I knew my equipment would be just fine. The foam, while not being used in this particular case, is really nice stuff and the pick-n-pluck process is fool proof. I ended up using a layer of it to enclose 600$ worth of long range RC aircraft ... MoreA very useful piece of equipment to anyone wanting to protect valuable tools of any trade really. I was referred to B&H by a buddy into photography, but my hobby is RC Helis which brings me to--> My 1550 sees duty as the enclosure for a 1000watt multi-chem battery charger and the dual server power supplies that run it. At no time have I ever felt that the equipment inside was in danger of damage from water or impacts. Tbh, I used it to win a safe bet that I wouldn't toss the case, electronics included, into a pool. Of course I knew my equipment would be just fine. The foam, while not being used in this particular case, is really nice stuff and the pick-n-pluck process is fool proof. I ended up using a layer of it to enclose 600$ worth of long range RC aircraft transmitters. Really easy to outline the piece you want to cut out and you can literally just knock it loose and pull it with your fingers. Finally, the case itself just looks cool. I've gotten some weird looks carrying around with folks being rather curious as to what could possibly need to be carried in a mil-spec case :) FYI, we use these cases at NASA to protect many of our sensitive devices/tools. You can buy one knowing your stuff isn't going anywhere. :P Con wise, the only thing I can think of is that the case is bulky. However, for the protection that this case provides it's an acceptable loss. Honestly, any case that is going to protect to the level of one of these isn't going to be very compact. That said, the fiber reinforced plastic that these are made of is fairly light.
originally posted on bhphotovideo.com
I received my Pelican 1550 case from B&H Friday. That night I custom shaped the Pluck & Pick foam interior (solid foam is not offered) for my Nikon D4 camera and a couple of lenses. I took the camera and lens out of the case 4 times on Saturday and already the foam Pick and Pluck pieces are starting to come apart! I called Pelican and all they would tell me was that it wasn't a warranty issue and that I should contact B&H. I'm not sure what B&H could or would do at this point. Even if they replaced the foam, it would be the same worthless Pick and Pluck liner! I am now trying to locate a foam supplier who will sell me a solid sheet of 1.3 (or 1.7) charcoal polyurethane foam. I shouldn't have to do this with a brand new case! I had a Halliburton case for 35 years ... MoreI received my Pelican 1550 case from B&H Friday. That night I custom shaped the Pluck & Pick foam interior (solid foam is not offered) for my Nikon D4 camera and a couple of lenses. I took the camera and lens out of the case 4 times on Saturday and already the foam Pick and Pluck pieces are starting to come apart! I called Pelican and all they would tell me was that it wasn't a warranty issue and that I should contact B&H. I'm not sure what B&H could or would do at this point. Even if they replaced the foam, it would be the same worthless Pick and Pluck liner! I am now trying to locate a foam supplier who will sell me a solid sheet of 1.3 (or 1.7) charcoal polyurethane foam. I shouldn't have to do this with a brand new case! I had a Halliburton case for 35 years without any foam problems. The only thing worse than the foam is Pelican's refusal to acknowledge that it is a problem!
originally posted on bhphotovideo.com
I have a smaller Pelican case that I have used for years but I needed a larger case as my amount of photo gear has increased. This case is very durable, crush proof and not too heavy. The 1550 is not an airline case, too big, but for storage, protection and for putting in the trunk of your car it is perfect. The best part is the TrekPak divider system. You can organize your gear with no wasted space, designed any way you want while providing good protection for your gear. Plus you can reorganize the design if you add or change your gear (you can order extra TrekPak dividers if needed).My only complaint is the identification plate. Pelican has an engraving service but they only ship within the US (I'm in Canada).
| External Dimensions | 52.5 x 43.7 x 21.3 cm |
| Internal Dimensions | 47.3 x 36 x 19.6 cm |
| Internal Lid Depth | 4.4cm |
| Internal Bottom Depth | 14.9cm |
| Bouyancy | 37.1 kg |
Pelican 1550 Case without Foam (Black)
Delivery $9.90
Pelican 1550 Case without Foam (Orange)
Delivery $8.90
Pelican 1550 Case without Foam (Yellow)
Delivery $8.90
Pelican 1550NF Case without Foam (Olive Drab Green)
Delivery $8.90
Pelican 1550 Case without Foam (Silver)
Delivery $8.90
A very useful piece of equipment to anyone wanting to protect valuable tools of any trade really. I was referred to B&H by a buddy into photography, but my hobby is RC Helis which brings me to--> My 1550 sees duty as the enclosure for a 1000watt multi-chem battery charger and the dual server power supplies that run it. At no time have I ever felt that the equipment inside was in danger of damage from water or impacts. Tbh, I used it to win a safe bet that I wouldn't toss the case, electronics included, into a pool. Of course I knew my equipment would be just fine. The foam, while not being used in this particular case, is really nice stuff and the pick-n-pluck process is fool proof. I ended up using a layer of it to enclose 600$ worth of long range RC aircraft ... MoreA very useful piece of equipment to anyone wanting to protect valuable tools of any trade really. I was referred to B&H by a buddy into photography, but my hobby is RC Helis which brings me to--> My 1550 sees duty as the enclosure for a 1000watt multi-chem battery charger and the dual server power supplies that run it. At no time have I ever felt that the equipment inside was in danger of damage from water or impacts. Tbh, I used it to win a safe bet that I wouldn't toss the case, electronics included, into a pool. Of course I knew my equipment would be just fine. The foam, while not being used in this particular case, is really nice stuff and the pick-n-pluck process is fool proof. I ended up using a layer of it to enclose 600$ worth of long range RC aircraft transmitters. Really easy to outline the piece you want to cut out and you can literally just knock it loose and pull it with your fingers. Finally, the case itself just looks cool. I've gotten some weird looks carrying around with folks being rather curious as to what could possibly need to be carried in a mil-spec case :) FYI, we use these cases at NASA to protect many of our sensitive devices/tools. You can buy one knowing your stuff isn't going anywhere. :P Con wise, the only thing I can think of is that the case is bulky. However, for the protection that this case provides it's an acceptable loss. Honestly, any case that is going to protect to the level of one of these isn't going to be very compact. That said, the fiber reinforced plastic that these are made of is fairly light.
I received my Pelican 1550 case from B&H Friday. That night I custom shaped the Pluck & Pick foam interior (solid foam is not offered) for my Nikon D4 camera and a couple of lenses. I took the camera and lens out of the case 4 times on Saturday and already the foam Pick and Pluck pieces are starting to come apart! I called Pelican and all they would tell me was that it wasn't a warranty issue and that I should contact B&H. I'm not sure what B&H could or would do at this point. Even if they replaced the foam, it would be the same worthless Pick and Pluck liner! I am now trying to locate a foam supplier who will sell me a solid sheet of 1.3 (or 1.7) charcoal polyurethane foam. I shouldn't have to do this with a brand new case! I had a Halliburton case for 35 years ... MoreI received my Pelican 1550 case from B&H Friday. That night I custom shaped the Pluck & Pick foam interior (solid foam is not offered) for my Nikon D4 camera and a couple of lenses. I took the camera and lens out of the case 4 times on Saturday and already the foam Pick and Pluck pieces are starting to come apart! I called Pelican and all they would tell me was that it wasn't a warranty issue and that I should contact B&H. I'm not sure what B&H could or would do at this point. Even if they replaced the foam, it would be the same worthless Pick and Pluck liner! I am now trying to locate a foam supplier who will sell me a solid sheet of 1.3 (or 1.7) charcoal polyurethane foam. I shouldn't have to do this with a brand new case! I had a Halliburton case for 35 years without any foam problems. The only thing worse than the foam is Pelican's refusal to acknowledge that it is a problem!
I have a smaller Pelican case that I have used for years but I needed a larger case as my amount of photo gear has increased. This case is very durable, crush proof and not too heavy. The 1550 is not an airline case, too big, but for storage, protection and for putting in the trunk of your car it is perfect. The best part is the TrekPak divider system. You can organize your gear with no wasted space, designed any way you want while providing good protection for your gear. Plus you can reorganize the design if you add or change your gear (you can order extra TrekPak dividers if needed).My only complaint is the identification plate. Pelican has an engraving service but they only ship within the US (I'm in Canada).
This thing could survive nuclear winter.I've also had to load and unload camera vans in the rain, and these things held up very well when exposed briefly to moisture.When you're not facing the worst that nature can give you, the other features of this case shine. It's ergonomic, the handle feels great, the two lock straps are very secure and have never broken. This particular size and model is pretty light and easy to carry in one hand.You might ask why a carrying case costs so much. It's because what's inside needs to be protected at all costs.My only gripe is that if you buy the case with foam, the pick-n-pluck foam can get gritty real fast if you're careless.I'd recommend ordering a custom molded or cut foam based on what you're packing 100% of the ... MoreThis thing could survive nuclear winter.I've also had to load and unload camera vans in the rain, and these things held up very well when exposed briefly to moisture.When you're not facing the worst that nature can give you, the other features of this case shine. It's ergonomic, the handle feels great, the two lock straps are very secure and have never broken. This particular size and model is pretty light and easy to carry in one hand.You might ask why a carrying case costs so much. It's because what's inside needs to be protected at all costs.My only gripe is that if you buy the case with foam, the pick-n-pluck foam can get gritty real fast if you're careless.I'd recommend ordering a custom molded or cut foam based on what you're packing 100% of the time. They always fit perfectly in Pelicans and never degrade as fast as the Pick-n-Plucks.If you're purchasing a Pelican without foam, it's an easy choice. If you purchase it with the foam, the entire package leans towards a 4 or 4.5/5I've also used Pelicans that were over 5 years old and the locks
Great, sturdy case. Feels like it is very durable and I feel confident transporting my VH300 head and pedals. I have already taken it on a few trips and my gear was completely safe.My only complaint is the foam - it is 2 large bricks stacked on top of one another, diced in the center so you can form it to the gear you want stored. The issue is that there is no easy way to cut the foam horizontally, so if your item is shorter/larger than the precut foam brick, it either won't fit or jump up and down in the box. I had to remove the foam bricks, and cut each in half horizontally with an xacto knife to get my desired height.
Great quality to protect my most valuable cameras and lenses. Would love a less expensive case but I have a hard time trusting them to protect my essential glass, cameras and drones.
My first case is around 30 years old and I still use it regularly. There's nothing wrong with it which is why I chose to buy Pelican again. The no foam option comes without the lid foam. I knew this before I purchased. I don't need the pick & pluck foam but the lid foam should be standard in my opinion. Still a five star rating because Pelican cases are the toughest cases made. I traveled around the globe with one of my 1650 cases a few years back. It was filled with grip and lighting gear. It's a bit worse for the wear but not a broken bit on it after 36 days of travel. If you want to buy a heavy-duty case once, buy a Pelican.
I have a Roland SPD-SX Pro and this fits perfectly as well as having room to put compartments for power and trigger cables with room to expand for more small accessories. This set-up exceeds any bag or case made specifically by Roland or other third parties because it meets my needs and can fit other people's needs that might be different from mine. I'm pretty sure other case solutions don't have room to leave the mounting bracket on the bottom of the unit whereas with a Pelican case, I can leave it on by plucking out a small hole in the middle for the shaft to go in and then plucking out a shape just big enough for the SPD unit to fit in while still being secure. This saves me set up and tear down time screwing and unscrewing the mounting bracket and keeps me from ... MoreI have a Roland SPD-SX Pro and this fits perfectly as well as having room to put compartments for power and trigger cables with room to expand for more small accessories. This set-up exceeds any bag or case made specifically by Roland or other third parties because it meets my needs and can fit other people's needs that might be different from mine. I'm pretty sure other case solutions don't have room to leave the mounting bracket on the bottom of the unit whereas with a Pelican case, I can leave it on by plucking out a small hole in the middle for the shaft to go in and then plucking out a shape just big enough for the SPD unit to fit in while still being secure. This saves me set up and tear down time screwing and unscrewing the mounting bracket and keeps me from having to pack a screwdriver as well. All in all, I'm really happy with how this case is working out for my slightly unconventional needs.
I have used Pelican products for years on whitewater rivers and in my vehicles. We subject them to more abuse than 95% of people would ever consider. They have all stayed dry in multiple whitewater raft flips on some of the biggest rivers in the world. They get tossed around in trailers and generally shown little respect for the damage that would occur to most cases.I purchased the 1550 as I have outgrown my 1500 for the amount of things that I carry for repairing people when something goes horribly wrong. There is still plenty of space in the new box, meaning I will need to find more lifesaving items to fill it!As to the old case, It gets the kit from my personal vehicle moved into it as that one is also out of space. The r1500 is about 12 years old and still ... MoreI have used Pelican products for years on whitewater rivers and in my vehicles. We subject them to more abuse than 95% of people would ever consider. They have all stayed dry in multiple whitewater raft flips on some of the biggest rivers in the world. They get tossed around in trailers and generally shown little respect for the damage that would occur to most cases.I purchased the 1550 as I have outgrown my 1500 for the amount of things that I carry for repairing people when something goes horribly wrong. There is still plenty of space in the new box, meaning I will need to find more lifesaving items to fill it!As to the old case, It gets the kit from my personal vehicle moved into it as that one is also out of space. The r1500 is about 12 years old and still going strong.
I own a couple of Pelican 1510s, one 1550, and a honking monster 1650.The reason people (including me) buy 1510s is for carrying them on airplanes. They're sized properly to fit on US domestic flights underneath a seat or in any overhead space. They accept TSA locks to deter casual thievery. AND the 1510 has wheels and a telescoping handle, making it easy to travel with—both to bring it on and off a plane and move it around when you're working onsite. I have traveled with the 1510 dozens of times and never had any trouble with it (meaning it always makes it onto the plane with me, which is my main priority when it's full of super-fragile expensive stuff).I got the 1550 because it's just a little bit bigger than the 1510, and has greater interior volume (about ... MoreI own a couple of Pelican 1510s, one 1550, and a honking monster 1650.The reason people (including me) buy 1510s is for carrying them on airplanes. They're sized properly to fit on US domestic flights underneath a seat or in any overhead space. They accept TSA locks to deter casual thievery. AND the 1510 has wheels and a telescoping handle, making it easy to travel with—both to bring it on and off a plane and move it around when you're working onsite. I have traveled with the 1510 dozens of times and never had any trouble with it (meaning it always makes it onto the plane with me, which is my main priority when it's full of super-fragile expensive stuff).I got the 1550 because it's just a little bit bigger than the 1510, and has greater interior volume (about 378 more cubic inches). This comes at the expense of wheels and the roll-aboard handle. But, bright side, there are no cut-outs for wheels inside the 1550, meaning you have more space in the bottom layer. It does hold more stuff, and that's good. In very specific cases, you could get a few more lenses and another camera body into this thing versus a 1510. That could be HUGE for your use case. But if it's not, I wouldn't recommend the 1550.Why? Well, the 1550 is a tricky beast to travel with. It is harder to move around with on a plane—you have to carry it it like a very heavy briefcase. (It is lighter than the 1510, but only by about 1.8 pounds...excluding your gear.)The 1550 also looks to flight personnel more like something that SHOULD be checked (or gate-checked) because it doesn't have the roll-aboard thing. It raises red flags that make people desire throwing your gear onto a conveyer belt.Also, technically the 1550 does NOT meet the size standards for under-seat carry-ons for some US airlines. Some airlines enforce this closely, and in some real-world case you WILL be forced to gate-check this case.So it's dicey. You run a very real risk of being forced to gate-check this thing (due to real airline policy you agreed to when you bought the ticket) versus the 1510, which will always fit under a seat, unless you've chosen an oddball seat. (Note: do not choose an oddball seat. Check a seating site to make sure of this.)Now that I have the spectrum of cases, I find the 1550 nice for local jobs and certain specialized items. For instance, I'm fine putting a medium-sized gimbal and associated hardware in a 1550 and just checking it. It survives that just fine.But for core camera equipment and lenses, I just can't recommend this thing. I'd rather carry a 1510 and cram a lens or two into a pouch in my carry-on backpack than risk a flight with a 1550.
| External Dimensions | 52.5 x 43.7 x 21.3 cm |
| Internal Dimensions | 47.3 x 36 x 19.6 cm |
| Internal Lid Depth | 4.4cm |
| Internal Bottom Depth | 14.9cm |
| Bouyancy | 37.1 kg |
