Simply Slide and Tighten for a reliable connection you can trust Philmac’s range of Australian made metric compression fittings are the solution for the perfect connection every time thanks to Philmac’s unique Slide and Tighten technology. Each fitting is pre-assembled and ready to use so there’s no need to disassemble the fittings or prepare the pipe prior to use. Simply cut the PE pipe square and slide it into the fitting until you feel the first point of resistance and then tighten the nut to the flange on the body of the fitting. With Philmac’s metric compression fittings, just slide and tighten and the job’s done!
Simply Slide and Tighten for a reliable connection you can trust Philmac’s range of Australian made metric compression fittings are the solution for the perfect connection every time thanks to Philmac’s unique Slide and Tighten technology. Each fitting is pre-assembled and ready to use so there’s no need to disassemble the fittings or prepare the pipe prior to use. Simply cut the PE pipe square and slide it into the fitting until you feel the first point of resistance and then tighten the nut to the flange on the body of the fitting. With Philmac’s metric compression fittings, just slide and tighten and the job’s done!
Simply Slide and Tighten for a reliable connection you can trust Philmac’s range of Australian made metric compression fittings are the solution for the perfect connection every time thanks to Philmac’s unique Slide and Tighten technology. Each fitting is pre-assembled and ready to use so there’s no need to disassemble the fittings or prepare the pipe prior to use. Simply cut the PE pipe square and slide it into the fitting until you feel the first point of resistance and then tighten the nut to the flange on the body of the fitting. With Philmac’s metric compression fittings, just slide and tighten and the job’s done!
Simply Slide and Tighten for a reliable connection you can trust Philmac’s range of Australian made metric compression fittings are the solution for the perfect connection every time thanks to Philmac’s unique Slide and Tighten technology. Each fitting is pre-assembled and ready to use so there’s no need to disassemble the fittings or prepare the pipe prior to use. Simply cut the PE pipe square and slide it into the fitting until you feel the first point of resistance and then tighten the nut to the flange on the body of the fitting. With Philmac’s metric compression fittings, just slide and tighten and the job’s done!
Last updated at 07/09/2026 14:24:21
Philmac 3G Metric Compression Joiner Poly x Poly | Blue Bucket 32mm
Delivery $15
Philmac 3G Metric Compression Slip Joiner Poly x Poly | Blue Bucket 32mm
Delivery $15
Compression Poly Metric Joiner- Poly x Poly - 32mm
Compression Poly Metric Joiner- Poly x Poly - 32mm
Compression Poly Metric Slip Joiner- Poly x Poly - 32mm
3G Metric Slip Joiner 32x32
PHILMAC 32MM METRIC SLIP JOINER
Delivery between 16–20 July $25.20
Philmac 32mm Metric Poly x Poly Pipe Joiner
Delivery $12
Philmac 32mm Metric Poly x Poly Pipe Joiner
Delivery $10
JOINER 3G METRIC PHILMAC 32mm x 32mm
Next-day delivery $100
originally posted on bunnings.com.au
This is a robust pipe joiner that looks as if it will last a while.I tried this to overcoming the failure of a hard plastic connector between the hose handle and the steel rod of a Wertheim 5030 vacuum cleaner. We bought the vac in 2007 in NZ and it has worked without fault since then, until the plastic connector cracked.I didn't like the idea of trying the range of '32mm' new rods/connectors advertised on the web as I could not be sure that the mm scale measurements and claims were going to match up in reality (rods being advertised for $100). I do not have calipers and cannot be certain that the apparent narrowing of the hose steel pipe from 32 to 31mm was going to allow successful connection.I will need to add an adhesive to the upstream pipe to avoid the ... MoreThis is a robust pipe joiner that looks as if it will last a while.I tried this to overcoming the failure of a hard plastic connector between the hose handle and the steel rod of a Wertheim 5030 vacuum cleaner. We bought the vac in 2007 in NZ and it has worked without fault since then, until the plastic connector cracked.I didn't like the idea of trying the range of '32mm' new rods/connectors advertised on the web as I could not be sure that the mm scale measurements and claims were going to match up in reality (rods being advertised for $100). I do not have calipers and cannot be certain that the apparent narrowing of the hose steel pipe from 32 to 31mm was going to allow successful connection.I will need to add an adhesive to the upstream pipe to avoid the slipping of the plastic sealer of the upstream end of the connector on the slightly narrowing steel pipe.Not perhaps what the 32mm connector was envisaged for but it saved recycling (as much as possible) an otherwise fully working vacuum cleaner. And as my wife and son remarked, the connector looked as if it was meant to be there in place.Well done Bunnings for selling the connector. Well done designer for creating a versatile connector.Hope that is helpful.
originally posted on ebay.com
Really good product. Easy to use. Recommend watching the Philmac video on YouTube
Philmac 3G Metric Compression Joiner Poly x Poly | Blue Bucket 32mm
Delivery $15
Philmac 3G Metric Compression Slip Joiner Poly x Poly | Blue Bucket 32mm
Delivery $15
Compression Poly Metric Joiner- Poly x Poly - 32mm
Compression Poly Metric Joiner- Poly x Poly - 32mm
Compression Poly Metric Slip Joiner- Poly x Poly - 32mm
This is a robust pipe joiner that looks as if it will last a while.I tried this to overcoming the failure of a hard plastic connector between the hose handle and the steel rod of a Wertheim 5030 vacuum cleaner. We bought the vac in 2007 in NZ and it has worked without fault since then, until the plastic connector cracked.I didn't like the idea of trying the range of '32mm' new rods/connectors advertised on the web as I could not be sure that the mm scale measurements and claims were going to match up in reality (rods being advertised for $100). I do not have calipers and cannot be certain that the apparent narrowing of the hose steel pipe from 32 to 31mm was going to allow successful connection.I will need to add an adhesive to the upstream pipe to avoid the ... MoreThis is a robust pipe joiner that looks as if it will last a while.I tried this to overcoming the failure of a hard plastic connector between the hose handle and the steel rod of a Wertheim 5030 vacuum cleaner. We bought the vac in 2007 in NZ and it has worked without fault since then, until the plastic connector cracked.I didn't like the idea of trying the range of '32mm' new rods/connectors advertised on the web as I could not be sure that the mm scale measurements and claims were going to match up in reality (rods being advertised for $100). I do not have calipers and cannot be certain that the apparent narrowing of the hose steel pipe from 32 to 31mm was going to allow successful connection.I will need to add an adhesive to the upstream pipe to avoid the slipping of the plastic sealer of the upstream end of the connector on the slightly narrowing steel pipe.Not perhaps what the 32mm connector was envisaged for but it saved recycling (as much as possible) an otherwise fully working vacuum cleaner. And as my wife and son remarked, the connector looked as if it was meant to be there in place.Well done Bunnings for selling the connector. Well done designer for creating a versatile connector.Hope that is helpful.
Really good product. Easy to use. Recommend watching the Philmac video on YouTube
