This bolt and nut set is ideal for fastening metal to metal or metal to timber through a pre-threaded hole. It is commonly used to secure two objects where there is access to the backside to install the nut.
This bolt and nut set is ideal for fastening metal to metal or metal to timber through a pre-threaded hole. It is commonly used to secure two objects where there is access to the backside to install the nut.
This bolt and nut set is ideal for fastening metal to metal or metal to timber through a pre-threaded hole. It is commonly used to secure two objects where there is access to the backside to install the nut.
This bolt and nut set is ideal for fastening metal to metal or metal to timber through a pre-threaded hole. It is commonly used to secure two objects where there is access to the backside to install the nut.
Last updated at 03/21/2026 13:41:41
Pinnacle Hardware M6 x 75mm Zinc Plated Hex Head Bolts And Nuts - 2 Pack
Delivery $10
originally posted on bunnings.com.au
Quallity product . I will buy again
originally posted on bunnings.com.au
Works alright for general usage
originally posted on bunnings.com.au
Good bolts. Make sure to use WD40 or something, and take it slow with them to prevent them from cold welding (seizing) when tightening.
| Thread pitch | 1mm |
| Total Weight | 0.144kg |
Pinnacle Hardware M6 x 75mm Zinc Plated Hex Head Bolts And Nuts - 2 Pack
Delivery $10
Quallity product . I will buy again
Works alright for general usage
Good bolts. Make sure to use WD40 or something, and take it slow with them to prevent them from cold welding (seizing) when tightening.
Handy having spares, so I'm happy
Very frustrated. None of your nuts/bolts give the thread pitch size on the packaging or here on your website catalogue.
Best bolt that is very solid. I used it in a wheelbarrow so it is destined for a tough life.
The boltiest bolts you ever did see. Truly the king of all bolts. If Chuck Norris was a bolt, he would be this one.
Several of the bolt heads appear to be failing in terms of integrity as they are marked already and I've just removed them from the packet. Expect that they will be the first to show signs of rust I can't waste the time in taking them back as the job is more important to finish now. Will be passing on the end product and warning my friend to keep an eye on them as they will be exposed to the salt air.
These bolts were visually very appealing and worked exceptionally well with no thread falling.Very pleased with the result and would recommend them.
Becomes work hardend and nut fuses to bolt when used with nylocs (same brand but not supplied and I used rattle gun to fit which probably generated too much heat and fused) the issue I suspect is from my fitting technique and not from the product no problem with the standard nuts supplied, all in all good product
| Thread pitch | 1mm |
| Total Weight | 0.144kg |
