Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 2.85mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour arctic teal has a matte look and is partly of natural origin. The packaging and coil are made from recycled cardboard and Polymaker plants a tree for every coil sold.The ideal print temperature of this filament is 190 to 230 graden. For best results, use a heated bed of 25 to 60 graden.Read more about printing with PLA filament here.
Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 2.85mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour arctic teal has a matte look and is partly of natural origin. The packaging and coil are made from recycled cardboard and Polymaker plants a tree for every coil sold.The ideal print temperature of this filament is 190 to 230 graden. For best results, use a heated bed of 25 to 60 graden.Read more about printing with PLA filament here.
Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 2.85mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour arctic teal has a matte look and is partly of natural origin. The packaging and coil are made from recycled cardboard and Polymaker plants a tree for every coil sold.The ideal print temperature of this filament is 190 to 230 graden. For best results, use a heated bed of 25 to 60 graden.Read more about printing with PLA filament here.
Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 2.85mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour arctic teal has a matte look and is partly of natural origin. The packaging and coil are made from recycled cardboard and Polymaker plants a tree for every coil sold.The ideal print temperature of this filament is 190 to 230 graden. For best results, use a heated bed of 25 to 60 graden.Read more about printing with PLA filament here.
Last updated at 02/20/2026 18:03:11
Polymaker PolyTerra PLA Bioplastic Based 3D Printing Filament, Matte PLA Filament, 1.75mm Filament Arctic Teal 1000g(2.2lb), Fit Most FDM Printer
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
originally posted on lazada.com.my
Carton spool is a little bit deformed but everything is fine. Quite easy to print with temperature around 200°C and build plate temperature as low as 30. Did have some adhesion problem but probably due to the bad surface of the plate. Nice matt look to the parts printed.
originally posted on 3dfilaprint.com
With being new to 3D printing, I was recommended this product, and I am pleased that I purchased the PolyTerra PLA+, as it was a lot better than a a cheap known brand that I first used. So I will be sticking with 3D FilaPrint from now on!
originally posted on galaxus.ch
This is an excellent budget PLA. Easy to print with as it sticks very well to the bed and hardly warps at bigger volumes. However, even though the look is nice, the feel is more grainy than other PLAs I've used. (E.g. FormFutura, Extrudr, and even Ender PLA all feels very silky).The Lava Red color is a bit matt but still nice. The Charcoal Black (labelled just "Black" by Digitec) is actually shiny and almost sparkles. Very nice.Settings: Hotend 195 C ; Bed 55 C ; Worked well with an enclosure.
| Filament Diameter | 2.85 mm |
| Filament Material | PLA |
| Box Dimensions (LxWxH) | 9.3 x 8.4 x 3" |
Polymaker PolyTerra PLA Bioplastic Based 3D Printing Filament, Matte PLA Filament, 1.75mm Filament Arctic Teal 1000g(2.2lb), Fit Most FDM Printer
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Carton spool is a little bit deformed but everything is fine. Quite easy to print with temperature around 200°C and build plate temperature as low as 30. Did have some adhesion problem but probably due to the bad surface of the plate. Nice matt look to the parts printed.
With being new to 3D printing, I was recommended this product, and I am pleased that I purchased the PolyTerra PLA+, as it was a lot better than a a cheap known brand that I first used. So I will be sticking with 3D FilaPrint from now on!
This is an excellent budget PLA. Easy to print with as it sticks very well to the bed and hardly warps at bigger volumes. However, even though the look is nice, the feel is more grainy than other PLAs I've used. (E.g. FormFutura, Extrudr, and even Ender PLA all feels very silky).The Lava Red color is a bit matt but still nice. The Charcoal Black (labelled just "Black" by Digitec) is actually shiny and almost sparkles. Very nice.Settings: Hotend 195 C ; Bed 55 C ; Worked well with an enclosure.
This is an excellent budget PLA. Easy to print with as it sticks very well to the bed and hardly warps at bigger volumes. However, even though the look is nice, the feel is more grainy than other PLAs I've used. (E.g. FormFutura, Extrudr, and even Ender PLA all feels very silky).The Charcoal Black (labelled just "Black" by Digitec) is actually shiny and almost sparkles. Very nice.Settings: Hotend 195 C ; Bed 55 C ; Worked well with an enclosure.
This material is one of my hands down favorites. The color intensity is truly a charcoal black. To me, it beats all other silk materials because of its light diffusing properties. Its rough to the touch and doesn't have the dry time CF does. Fantastic material and I will keep buying it again and again
| Filament Diameter | 2.85 mm |
| Filament Material | PLA |
| Box Dimensions (LxWxH) | 9.3 x 8.4 x 3" |
