Medium Blue - L34W34 - The Detroit TF, tapered fit, men's motorcycle riding jeans offer an on-trend look while staying true to the protective characteristics our denim collection has become famous for. The stretch Cordura denim outer shell is on-par with today’s demand for stretch jeans. And when combined with PWR shield on the high risk zones, these jeans surpass leather when it comes to abrasion resistance. It’s then all put together using PWR yarn, so these jeans mean business when it comes to offering motorcycle-ready protection against undesired road rash. CE-rated impact protection comes from the ultra-thin SEESMART armor at the hips and knees. They offer an extra safeguard in case of an unfortunate mishap while remaining hardly noticeable when riding or strolling down the streets. The Detroit gives you that washed, stretch denim look-and-feel like your everyday jeans, yet ready to roll at any time. The riding pants and trousers of choice.
Medium Blue - L34W34 - The Detroit TF, tapered fit, men's motorcycle riding jeans offer an on-trend look while staying true to the protective characteristics our denim collection has become famous for. The stretch Cordura denim outer shell is on-par with today’s demand for stretch jeans. And when combined with PWR shield on the high risk zones, these jeans surpass leather when it comes to abrasion resistance. It’s then all put together using PWR yarn, so these jeans mean business when it comes to offering motorcycle-ready protection against undesired road rash. CE-rated impact protection comes from the ultra-thin SEESMART armor at the hips and knees. They offer an extra safeguard in case of an unfortunate mishap while remaining hardly noticeable when riding or strolling down the streets. The Detroit gives you that washed, stretch denim look-and-feel like your everyday jeans, yet ready to roll at any time. The riding pants and trousers of choice.
Medium Blue - L34W34 - The Detroit TF, tapered fit, men's motorcycle riding jeans offer an on-trend look while staying true to the protective characteristics our denim collection has become famous for. The stretch Cordura denim outer shell is on-par with today’s demand for stretch jeans. And when combined with PWR shield on the high risk zones, these jeans surpass leather when it comes to abrasion resistance. It’s then all put together using PWR yarn, so these jeans mean business when it comes to offering motorcycle-ready protection against undesired road rash. CE-rated impact protection comes from the ultra-thin SEESMART armor at the hips and knees. They offer an extra safeguard in case of an unfortunate mishap while remaining hardly noticeable when riding or strolling down the streets. The Detroit gives you that washed, stretch denim look-and-feel like your everyday jeans, yet ready to roll at any time. The riding pants and trousers of choice.
Medium Blue - L34W34 - The Detroit TF, tapered fit, men's motorcycle riding jeans offer an on-trend look while staying true to the protective characteristics our denim collection has become famous for. The stretch Cordura denim outer shell is on-par with today’s demand for stretch jeans. And when combined with PWR shield on the high risk zones, these jeans surpass leather when it comes to abrasion resistance. It’s then all put together using PWR yarn, so these jeans mean business when it comes to offering motorcycle-ready protection against undesired road rash. CE-rated impact protection comes from the ultra-thin SEESMART armor at the hips and knees. They offer an extra safeguard in case of an unfortunate mishap while remaining hardly noticeable when riding or strolling down the streets. The Detroit gives you that washed, stretch denim look-and-feel like your everyday jeans, yet ready to roll at any time. The riding pants and trousers of choice.
Last updated at 04/01/2025 17:27:57
originally posted on motorcyclegear.com
Got these for city cruising on my electric scooter. These fit true to size, definitely slim through the legs. This is my first time trying Rev'It protection and I was very surprised how thin the knee and hip guards are. The comfort of these jeans plus the CE rated guards make me a very happy camper!
originally posted on fortnine.ca
Normally wear 34Wx32L and ordered this size. They fit exactly the same as my regular jeans. I'm not a fan of wearing 2 inch longer legs that need rolling up off the bike. These 32" are actually 32.5" which helps a bit. Still ride up but fine for me. Tapered fit is perfect, not too slim or baggy and just fit over my boots. People really can't tell they are riding jeans. Can wear all day, although a bit heavier. A lot of money for a pair a jeans but feel safer and still much less than Klim forty 3 for basically the same thing. The rise is pretty low so using a belt. Protection is comfortable although safety is only level 1. Can't feel the hip armor at all. Knee pads arn't bothersome, they do cover knees when bent but much of the pad is above knee.
originally posted on motorcyclegear.com
Good fit, tasteful styling, aramid fiber cloth inside around the top third protecting your backside and frontside. Sits below the waistline just over the hip bones, like traditional jeans. Thin (level 1?) knee and hip pads installed. Nice lining keeping the scratchy aramid away from your skin. Good look, good fit, knee armor sits where it should. Reasonable protection for reasonable riding, riding to work, wearing at work, etc. Does not look like 'armored ADV riding gear'.
Got these for city cruising on my electric scooter. These fit true to size, definitely slim through the legs. This is my first time trying Rev'It protection and I was very surprised how thin the knee and hip guards are. The comfort of these jeans plus the CE rated guards make me a very happy camper!
Normally wear 34Wx32L and ordered this size. They fit exactly the same as my regular jeans. I'm not a fan of wearing 2 inch longer legs that need rolling up off the bike. These 32" are actually 32.5" which helps a bit. Still ride up but fine for me. Tapered fit is perfect, not too slim or baggy and just fit over my boots. People really can't tell they are riding jeans. Can wear all day, although a bit heavier. A lot of money for a pair a jeans but feel safer and still much less than Klim forty 3 for basically the same thing. The rise is pretty low so using a belt. Protection is comfortable although safety is only level 1. Can't feel the hip armor at all. Knee pads arn't bothersome, they do cover knees when bent but much of the pad is above knee.
Good fit, tasteful styling, aramid fiber cloth inside around the top third protecting your backside and frontside. Sits below the waistline just over the hip bones, like traditional jeans. Thin (level 1?) knee and hip pads installed. Nice lining keeping the scratchy aramid away from your skin. Good look, good fit, knee armor sits where it should. Reasonable protection for reasonable riding, riding to work, wearing at work, etc. Does not look like 'armored ADV riding gear'.
This is my first pair of riding jeans so I don't have much basis for comparison, but I like these jeans a lot. I like that the have both cordura-denim cloth and an aramid liner, for double protection. I was disappointed in the armor, although i suspect it's on par for riding jeans. It seems like it's probably fine CE-1 armor, but I can't imagine it being sufficiently protective in a crash. Also, the leg of the jeans rotates inward on me, so the pads sat toward the inside of my knees and left the outside too exposed. All jeans fit me like this, so it might be how I'm built rather than the jeans. YMMV! I wanted more impact protection than these offered. I ended up keeping the jeans because I really like their fit and their abrasion resistance, but I got some really ... MoreThis is my first pair of riding jeans so I don't have much basis for comparison, but I like these jeans a lot. I like that the have both cordura-denim cloth and an aramid liner, for double protection. I was disappointed in the armor, although i suspect it's on par for riding jeans. It seems like it's probably fine CE-1 armor, but I can't imagine it being sufficiently protective in a crash. Also, the leg of the jeans rotates inward on me, so the pads sat toward the inside of my knees and left the outside too exposed. All jeans fit me like this, so it might be how I'm built rather than the jeans. YMMV! I wanted more impact protection than these offered. I ended up keeping the jeans because I really like their fit and their abrasion resistance, but I got some really nice CE-2 strap-on armor to wear with them. It looks a bit funkier, but I'm all about saving my kneecaps.
Great riding jeans. Included armor is very flexible = comfortable. These are my second pair of REVIT riding jeans (well, other pair is their cargo pants) and I'm consistent with their size 30. My waist is about 30-31" so I would say they run a bit larger than the stated size. YMMV though. And as always, MotorcycleGear.com has very competitive prices and was quick to ship my order. Thanks!
This is my second pair of Revit Detroit jeans. I usually wear a 31 inch waist but I went down to a 30 in and they fit perfectly because of the stretch, and I like a snugger fit. The look great and provide very good protection for a jean. They are a little warm so not ideal for the hot summer weather but they're very versatile otherwise.
I would have given it a 1 star but Seesmart protectors deserve a star for sure. Everything else about this jeans is terribleInstead of tapered fit, a better way to describe these Jeans is "Mom jeans at the top, weird hipster fit at the bottom"But, a bigger issue is that the knee pads are not adjustable. At this price, the jeans should have velcro to adjust the knee pads. Because of the way these are stitched, the knee pads don't sit right over the knee, defeating the entire purpose of the jeans....
I’ve got a few pairs of riding jeans. From Icon - to Alpinestars. But this pair of Revit jeans is the first pair that I haven’t immediately yanked the armour out of. You barely notice it. I really like my Trilobite Taff and Micas for their fit and appearance but the armour sucks. Looks like Revit managed to figure out how to make safe and good looking jeans at the same time. Plus a hint of reflectivity at the cuff. Pricey and they run a tad large in the waist (imho), but they are My new favs!
I was expecting the taper fit to be normal up top, and just a smaller leg opening down towards the bottom. I would consider these to be more of a slim fit throughout. The material has a nice stretch to it so it's still easy to move around. I'm usually a size 30-31waist. I got a 31 and they fit well.Great qualilty and value all around. Their hip and knee armor are light and flexible so it's hard to tell it's even there.
Very satisfied with these pants. The fit in the waist is slightly larger than typical sizing and other jeans but the length is true to size. The material is very soft, comfortable, and does not restrict movement at all. The armor in the hips and the knees is flexible and comfortable as opposed to other hard armor jeans. When in the riding position the armor is well located over the knees and hips. The inclusion of CE level 1 hip armor along with knee armor was a big selling point
