All-in-one sanding and polishing system for painted surfaces. Full Kit Contents: Random orbital polisher Polishing compound coarse 250ml Polishing compound fine 250ml Wool polishing pad 130-145mm Wool polishing pad fine 130-145mm Foam polishing pad coarse 130-150mm Foam polishing pad fine 130-150mm Microfibre cloths x 4 Cable clamp Bigfoot apron Bigfoot tools bag Duetto is equally effective working with soft or interface backing pads teamed with micro-abrasives during the defect correction step or with foam polishing pads and compounds during the polishing stage. Extensive research on random orbital dynamics and exhaustive testing resulted in the choice of a 12mm orbit for Duetto. This orbit length greatly improves the surface rectification abilities of the latest generation of microabrasive discs. The combination of Duetto and microabrasives is especially effective when smoothing orange peel or significant defects. The finish generated by this combination is both homogeneous and predictable, with no deep sanding marks. The use of microabrasive discs to correct severe defects creates a surface that is easily polished, radically reducing the overall time of the full correction process. Duetto is so well balanced and low in vibration that the operator can easily control the sanding step by simply guiding Duetto over the surface. The ability of the operator to control the tool so efficiently minimises the chances of creating rough and uneven surfaces that require time-consuming rework. Duetto has several design features that make it uniquely operator friendly. The anti-spinning device reduces the chances of operator error even for a novice technician. The front hand grip allows the operator to place his/her hand at the virtual balance center of the tool and keeps vibration to a minimum. The electronic module has built-in torque control, reducing the need for the operator to apply significant downward vertical pressure. Another unique Duetto feature is the rubber support that allows the operator to place Duetto on a workbench without the abrasive disc touching a surface that might contain contaminants that could transfer to the workpiece during the sanding process. Compatible with microabrasive discs and the appropriate 5” interface pad. Features: Improved rubberised grip at the head of the machine. Two rubber rests on the top of the machine allow for it to be set down when not in use without falling over. Rubberised speed selector wheel makes it easier and more comfortable to select your working speed Progressive trigger allows for slow starts and extra control at your finger tips. Highly efficient custom wound motor delivering speeds of 3000 - 5200 RPM An extra-long 9 metre power cable also in most cases eliminates the need for an extension lead. Specifications: Backing Plate Diameter: 125mm (5") Cord Length: 9M Orbit: 15mm Power: 500w Speed: 3000-5300RPM Weight: 2.6kg