Ordered on 13 May. Received on 15 May. Secured packaging. Very secured and hard. Used the same brand before & last for 4years. Thats why I repeat the same brand. I also love the high gap around the camera. Recommended

Awkward Fit

iPhone 12 and case came today, but unfortunately I the case fits awkwardly on the phone. It’s a little bit loose on the bottom for some reason and there’s almost too much play around the volume and power buttons. I’ve taken it off and on a couple of times to make sure it wasn’t a fluke. This is the first time I’ve ordered a case at the same time as the release of a phone, not sure if this is just a first run production issue or if it will carry into the future.

Great quality case that needs just small refinements as the side buttons are not very responsive

I’m a huge fan of these cases and every year it’s a struggle to find a case that is aesthetically pleasing, comfortable to hold and functional. Ultimately it’s this clear case that wins. It started out as a quick shopping experience to get something protective on the iPhone while more cases make it to the market. Four years ago when I did that I immediately loved the case and ultimately everyone in the house was using them. The constructive criticism is as much as I love the slim profile, the three buttons are near if not flush with the side of the case and determining volume up or down as well as taking screenshots can be a bit of a challenge. If the buttons were a maybe 2 millimeters higher the buttons would be more responsive. I also believe if Spigen could get ... MoreI’m a huge fan of these cases and every year it’s a struggle to find a case that is aesthetically pleasing, comfortable to hold and functional. Ultimately it’s this clear case that wins. It started out as a quick shopping experience to get something protective on the iPhone while more cases make it to the market. Four years ago when I did that I immediately loved the case and ultimately everyone in the house was using them. The constructive criticism is as much as I love the slim profile, the three buttons are near if not flush with the side of the case and determining volume up or down as well as taking screenshots can be a bit of a challenge. If the buttons were a maybe 2 millimeters higher the buttons would be more responsive. I also believe if Spigen could get the MagSafe in this case it would flat out be so much better than Apple’s clear case which I found too slick and not a fan of the bottom not being covered.Update 11/1 after many attempts it is nearly impossible for my 16 your old to do screen shots and identify buttons due to the low profile. While the low profile helps keep the case form fitting it causes the buttons to be too difficult to respond for volume up and down as well as screen shots. I’ve struggled with it as well but have decided I will keep my case but will have to send his back as he gets too frustrated with the button covers being too flat.

Looks great as always but buttons can be improved

This is my third Spigen clear case, I had one for the iPhone X and 11 Pro. Like usual, this case looks great on the phone and let’s you maintain some of the sleekness and color of the phone without sacrificing durability.With the “new” flat sides again where the screen goes smoothly to the edge, this case does a good job providing a subtle raised edge so when you drop it, the screen has some buffer with the surface.The only reason I’m not giving this 5 stars is because the buttons aren’t as responsive as previous cases. I have to press a lot harder for the volume buttons and also the power button. In the previous cases, it felt like there was more plastic in the button so you didn’t have to squeeze the case as hard to make contact with the button. I have to make a ... MoreThis is my third Spigen clear case, I had one for the iPhone X and 11 Pro. Like usual, this case looks great on the phone and let’s you maintain some of the sleekness and color of the phone without sacrificing durability.With the “new” flat sides again where the screen goes smoothly to the edge, this case does a good job providing a subtle raised edge so when you drop it, the screen has some buffer with the surface.The only reason I’m not giving this 5 stars is because the buttons aren’t as responsive as previous cases. I have to press a lot harder for the volume buttons and also the power button. In the previous cases, it felt like there was more plastic in the button so you didn’t have to squeeze the case as hard to make contact with the button. I have to make a noticeable effort to turn the screen on or off, and the case does slightly move inwards from the side when I do this.

Major flaw overweigh any positives

The case seems to be well-made, but the biggest knock on it from me are the buttons. Instead of having cutouts for the physical buttons on the iPhone 12 Pro, the case covers the buttons with small grooves/divots for the users to know that these are to be pressed. The problem is that it's hard to locate the buttons quickly by feeling around with your fingers. The grooves/divots are subtle, so you can't tell if your fingers are about to press the up volume button, down volume button or right in the middle. Also, the up/down volume buttons on the case are not physically separated (as in, the plastic is one piece, not cut), so when you press either buttons, the feedback is not great.Besides the major gripe detailed above, the case seems well made. But the flaw is just ... MoreThe case seems to be well-made, but the biggest knock on it from me are the buttons. Instead of having cutouts for the physical buttons on the iPhone 12 Pro, the case covers the buttons with small grooves/divots for the users to know that these are to be pressed. The problem is that it's hard to locate the buttons quickly by feeling around with your fingers. The grooves/divots are subtle, so you can't tell if your fingers are about to press the up volume button, down volume button or right in the middle. Also, the up/down volume buttons on the case are not physically separated (as in, the plastic is one piece, not cut), so when you press either buttons, the feedback is not great.Besides the major gripe detailed above, the case seems well made. But the flaw is just too great for me to rate it anything more than 2 stars.

Not great ...

As other reviewers have written, the case doesn’t seem to fit quite right.It’s loose around the volume buttons. Almost as if the case got stretched out a bit on that side.It doesn’t sit flat. There are raised edges on three back corners. But not on the corner by the cameras. There are raised edges around the camera but they aren’t the same height as the corner edges. So it rocks whenever you have the phone sitting flat and push in the upper right corner. This is just poor engineering and design.There is way too much branding and text on the sides of the case. Having “Spigen” (left side, lower corner) I understand. But do I really need to see that it has “Air Cushion Technology” (top side, left corner)? Or “Designed in Irvine California. Made is South Korea” (right ... MoreAs other reviewers have written, the case doesn’t seem to fit quite right.It’s loose around the volume buttons. Almost as if the case got stretched out a bit on that side.It doesn’t sit flat. There are raised edges on three back corners. But not on the corner by the cameras. There are raised edges around the camera but they aren’t the same height as the corner edges. So it rocks whenever you have the phone sitting flat and push in the upper right corner. This is just poor engineering and design.There is way too much branding and text on the sides of the case. Having “Spigen” (left side, lower corner) I understand. But do I really need to see that it has “Air Cushion Technology” (top side, left corner)? Or “Designed in Irvine California. Made is South Korea” (right side)?I’ve had decent luck with Spigen in the past. But not this time. I’d return this if I could but it’s “used” since I peeled off the protective film. So I think I’m just stuck with a mediocre case. It’s ok but far from great or what I’ve come to expect from Spigen.There are probably better cases out there. I would recommend looking at other ones.

Sleek design

This case fits my iPhone 12 pro perfectly. I’m seeing a lot of complaints about the flushed button design on the sides, however, I love the sleek look. The only thing I didn’t like about the case is the raised rubber corners on the backside of the case. I can see a lot of lint being attracted to this. I have a dog and I can see the hairs getting stuck to it already. Yikes.

Spigen is definitely the best OEM aftermarket

Perfect case. Iv had three of these cases from iPhone 7/XS/12pro all keep the phone well protected, each was used for 2 years no issues. Hard back with soft bumpers and 4 little feet which are hardly noticeable but keeps the phone from being flat on a surface and gives that extra bit of room for me to be able to stick a thin magnetic pad on the back for my car holder. A* product i also use the spigen 27w block charger and USBC cables. Very happy