ToolPRO Car Stands Ratchet 3000kg
ToolPRO Car Stands Ratchet 3000kg
Last updated at 03/21/2026 16:03:22
TOOL PRO CAR STANDS
Delivery between 24–30 Mar $10
ToolPRO Car Stands Ratchet 3000kg
Delivery between Tue – Fri $11.99
ToolPRO Car Stands Ratchet | 3000kg Heavy-Duty Vehicle Support – Pair
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
originally posted on supercheapauto.com.au
Big, strong, HEAVY! Jack stands. Much better than my old smaller ones. Had the front end of our surf on these for the last 3 weeks straight and it’s solid as a rock. And thanks to Black Friday sales, saved $60 a pair on them. Bargain.
originally posted on supercheapauto.com.au
Pretty good. Used it to hold my LandCruiser 200 series up while I changed the oil. Very easy to pull up the adjusted height and bring it down when you're finished with it. Definitely a great tool to have.
originally posted on supercheapauto.com.au
Bought 4 for rebuilding a Torana.Jacked to about 3/4 the height these can go, there's plenty of room for this 6'4 120kgs to get under the car and comfortably work
| Working Load Limit | 3000kg |
| Height Lowered | 367mm |
| Height Raised | 522mm |
| Adjustment Type | Ratchet |
TOOL PRO CAR STANDS
Delivery between 24–30 Mar $10
ToolPRO Car Stands Ratchet 3000kg
Delivery between Tue – Fri $11.99
ToolPRO Car Stands Ratchet | 3000kg Heavy-Duty Vehicle Support – Pair
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Big, strong, HEAVY! Jack stands. Much better than my old smaller ones. Had the front end of our surf on these for the last 3 weeks straight and it’s solid as a rock. And thanks to Black Friday sales, saved $60 a pair on them. Bargain.
Pretty good. Used it to hold my LandCruiser 200 series up while I changed the oil. Very easy to pull up the adjusted height and bring it down when you're finished with it. Definitely a great tool to have.
Bought 4 for rebuilding a Torana.Jacked to about 3/4 the height these can go, there's plenty of room for this 6'4 120kgs to get under the car and comfortably work
Bought to ensure I could work under my car safely. My car is standard height, so these were easy to fit after jacking the car up. Haven't had to use the rachet function, but I imagine it would be a convenient feature. I was able to replace my starter motor in half the time, as I was able to get right under the car to see exactly where the bolts were, and it gave me room to manouver tools etc. (I'm not as lean as I used to be!). They were great value for money - apart from the money I saved replacing the starter motor myself.
I’ve always got under my car with a trolley Jack. Literally the day I used these Jack stands saved my life. I used the stands and put the trolley Jack under to slightly hold the car as a safety. Got under the car and heard and “Donk” turned my head to the left and seen my trolley Jack failed. Don’t be cheap like I was!
These ToolPro 2000kg car stands are 100% ROCK SOLID.I doubt whether a sledge hammer would do much damage to these things.I honestly believe that the 2000kg weight holding capacity on these stands is conservative.Id put just about anything on these stands with complete confidence.An absolute brute of a stand...which is what a car stand should be.Excellent product...highly recommended.
I purchased four of these to position under the chassis rails of my 4WD and I am very pleased with the product. They are well built (decent welds), with a wide stable base and a large surface area on which the axle/chassis rests. Great value for money.
Good quality (slight unevenness on concrete, maybe 2mm on the diagonal) however they even out and are fine under load. These are perfect for 4WD owners who need height, and a 2 or 3 tonne stand would be on full extension (which I think is dangerous if you are applying lateral load e.g. shaking suspension parts or muffler parts loose).I use a combination of drive-up ramps on front of my 4WD (2 tonne each) + stands on rear axles. Very solid and peace of mind if you under the vehicle changing transmission or transaxle fluid etc.Good weld and paint, no imperfections.These would not be suitable for a passenger car (maybe not even an SUV) - you would need more clearance to be able to use these, and they are overkill for that size vehicle anyway.On sale it's good value.
Very useful stands and easy to use. I originally bought these but they were too hard to get under my car because they were about 1cm taller than my jack could lift so went back and requested a change to the next size down. The staff were very helpful and the swap was easy. The ones I ended up with are the same but smaller so I have no doubt these ones are just as easy to use.
I used these stands immediately after buying them and found them to be very strong, stable and safe. The ratchet lock is very positive, no chance of slippage. Very satisfied with both quality and price.
| Working Load Limit | 3000kg |
| Height Lowered | 367mm |
| Height Raised | 522mm |
| Adjustment Type | Ratchet |
