A gear puller is an incredibly handy tool for removal of stuck or small tolerance pulleys or gears. The centre of the bolt on the puller has a pointed centre allowing it to locate in the centre point of the shaft that the gear or pulley is mounted on. With the three outer jaws firmly locked behind the gear or pulley, the bolt on the gear puller can then be tightened allowing the jaws to slowly pull the gear off of the shaft. The ToolPRO 3 Jaw 150mm gear puller is made from incredibly tough drop forged vanadium steel to ensure no breakages or bends occur from the high tension experienced during pulling. This puller has a 6" or 150mm capacity which is large enough for many gears or pulleys found in automotive or mechanical applications.
A gear puller is an incredibly handy tool for removal of stuck or small tolerance pulleys or gears. The centre of the bolt on the puller has a pointed centre allowing it to locate in the centre point of the shaft that the gear or pulley is mounted on. With the three outer jaws firmly locked behind the gear or pulley, the bolt on the gear puller can then be tightened allowing the jaws to slowly pull the gear off of the shaft. The ToolPRO 3 Jaw 150mm gear puller is made from incredibly tough drop forged vanadium steel to ensure no breakages or bends occur from the high tension experienced during pulling. This puller has a 6" or 150mm capacity which is large enough for many gears or pulleys found in automotive or mechanical applications.
A gear puller is an incredibly handy tool for removal of stuck or small tolerance pulleys or gears. The centre of the bolt on the puller has a pointed centre allowing it to locate in the centre point of the shaft that the gear or pulley is mounted on. With the three outer jaws firmly locked behind the gear or pulley, the bolt on the gear puller can then be tightened allowing the jaws to slowly pull the gear off of the shaft. The ToolPRO 3 Jaw 150mm gear puller is made from incredibly tough drop forged vanadium steel to ensure no breakages or bends occur from the high tension experienced during pulling. This puller has a 6" or 150mm capacity which is large enough for many gears or pulleys found in automotive or mechanical applications.
A gear puller is an incredibly handy tool for removal of stuck or small tolerance pulleys or gears. The centre of the bolt on the puller has a pointed centre allowing it to locate in the centre point of the shaft that the gear or pulley is mounted on. With the three outer jaws firmly locked behind the gear or pulley, the bolt on the gear puller can then be tightened allowing the jaws to slowly pull the gear off of the shaft. The ToolPRO 3 Jaw 150mm gear puller is made from incredibly tough drop forged vanadium steel to ensure no breakages or bends occur from the high tension experienced during pulling. This puller has a 6" or 150mm capacity which is large enough for many gears or pulleys found in automotive or mechanical applications.
Last updated at 03/21/2026 21:31:30
150Mm 3-Claw Puller Carbon Steel Spiral Bar Remover Tool for Double Hole for Gears Bearings Pullers Pullers Set Versatile Jaw Puller for Easy Removal
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
ToolPRO Gear Puller 3 Jaw 150mm
Delivery between Tue – Fri $8.99
originally posted on supercheapauto.com.au
First use worked perfectly, cranked down on it with a ratcheting socket and the part pulled free with ease. The elation was short lived, as I swapped the arms onto the short length to better fit a second item, cranked down on the socket and the metal tooth on one arm sheared.Would recommend for light duty only. Don't even think of cheating and using an impact driver etc - I managed to break it by hand.
originally posted on supercheapauto.com.au
Would have been good if more information was provided on what the 150mm related to. i.e. the pulling distance or the diameter of the item to be pulled.The item to be pulled (drive shaft) had fixed bolts such that the puller could not be centrally aligned.Despite this the puller did the job. With more information on dimensions we could probable have purchased a smaller puller.
originally posted on supercheapauto.com.au
First time I have ever used this item. So easy to use and does the job 100%. Supercheap store workers did a great job.
150Mm 3-Claw Puller Carbon Steel Spiral Bar Remover Tool for Double Hole for Gears Bearings Pullers Pullers Set Versatile Jaw Puller for Easy Removal
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
ToolPRO Gear Puller 3 Jaw 150mm
Delivery between Tue – Fri $8.99
First use worked perfectly, cranked down on it with a ratcheting socket and the part pulled free with ease. The elation was short lived, as I swapped the arms onto the short length to better fit a second item, cranked down on the socket and the metal tooth on one arm sheared.Would recommend for light duty only. Don't even think of cheating and using an impact driver etc - I managed to break it by hand.
Would have been good if more information was provided on what the 150mm related to. i.e. the pulling distance or the diameter of the item to be pulled.The item to be pulled (drive shaft) had fixed bolts such that the puller could not be centrally aligned.Despite this the puller did the job. With more information on dimensions we could probable have purchased a smaller puller.
First time I have ever used this item. So easy to use and does the job 100%. Supercheap store workers did a great job.
Helped me pull a hub off that was stuck to the axle. Would not have been able to do it without this puller as the bearing was stuffed. Made the job extremely easy.
Quality puller. Variable size. Did a great job, with ease.
To get the rear wheel bearing off a Classic VW swing axle can be a hassle - and it turned out the be just that. However with this Puller I was able to easily remove the bearing by pulling the axle tube (which took the bearing with it) off the axle. It is a nice big stable puller and it was a very safe operation - it got me out of a spot of bother.
Very good gear puller I have used it a lot to do a lot of heavy work very good puller
Great product.Improvement I made was to replace nuts with nylocs.
Bought this because it was on special, used it twice so far, once to depress the clutch fingers while using the torque wrench on the clutch bolts, and the other to pull the gearbox output flange off. Works well, seems durable enough and is quite heavy if you have to hold it up for a while.
The product was good I used it to remove a harmonic balancer on a L67
