A modular DC bus bar, used to connect batteries to the Lynx DC distribution system. The lynx power in module is used to connect batteries via an external fuse. It can be useful if you have multiple parallel strings. Due to the extremely high short circuit current potential of most battery banks, it is suggested to use an external fuse system with an appropriate fault current interruption rating (such as an NH HRC). The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables. It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.
A modular DC bus bar, used to connect batteries to the Lynx DC distribution system. The lynx power in module is used to connect batteries via an external fuse. It can be useful if you have multiple parallel strings. Due to the extremely high short circuit current potential of most battery banks, it is suggested to use an external fuse system with an appropriate fault current interruption rating (such as an NH HRC). The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables. It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.
A modular DC bus bar, used to connect batteries to the Lynx DC distribution system. The lynx power in module is used to connect batteries via an external fuse. It can be useful if you have multiple parallel strings. Due to the extremely high short circuit current potential of most battery banks, it is suggested to use an external fuse system with an appropriate fault current interruption rating (such as an NH HRC). The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables. It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.
A modular DC bus bar, used to connect batteries to the Lynx DC distribution system. The lynx power in module is used to connect batteries via an external fuse. It can be useful if you have multiple parallel strings. Due to the extremely high short circuit current potential of most battery banks, it is suggested to use an external fuse system with an appropriate fault current interruption rating (such as an NH HRC). The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables. It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.
Last updated at 06/22/2026 08:23:22
Victron Lynx Smart Bms 500 - LYN034160200
Free delivery between 25 June – 2 July
Victron Lynx Smart Bms 500
Free delivery between 25 June – 2 July
Victron Lynx Smart BMS 500
Delivery between 24 June – 3 July $44.27
Victron Lynx Smart BMS (LYN034160200)
Free delivery
Victron Energy Lynx Smart BMS 500A | Lithium Battery Management System
Delivery $12
Victron Lynx Smart BMS 500
Delivery $14
Victron Energy Lynx Smart BMS 500A (M8)
Victron Lynx Smart BMS 500 (M8) LYN034160200
Free delivery between Wed – Fri
Victron Energy Lynx Smart Battery Management (BMS) 500 | LYN034160200
Free delivery
Victron Lynx Smart BMS 500 (M8)
Delivery $96.58
| Operating Range (temp) | -40°C to +60° |
| Humidity | Max. 95% (non-condensing) |
| Dimensions | 190 x 180 x 80 mm |
| Net Weight (kg) | 1.9 Kg |
| Protections | IP22 |
Victron Lynx Smart Bms 500 - LYN034160200
Free delivery between 25 June – 2 July
Victron Lynx Smart Bms 500
Free delivery between 25 June – 2 July
Victron Lynx Smart BMS 500
Delivery between 24 June – 3 July $44.27
Victron Lynx Smart BMS (LYN034160200)
Free delivery
Victron Energy Lynx Smart BMS 500A | Lithium Battery Management System
Delivery $12
| Operating Range (temp) | -40°C to +60° |
| Humidity | Max. 95% (non-condensing) |
| Dimensions | 190 x 180 x 80 mm |
| Net Weight (kg) | 1.9 Kg |
| Protections | IP22 |
