Standard type of carbide hole saw. By adopting the step center drill PAT.P, the impact when penetrating the center drill is mitigated. Uses a "10mm / 13mm chuck combined shank" that can be used with any drill chuck diameter. It cannot be used with a drilling machine. * Chuck the three sides of the shank firmly to prevent the shank from shaking or falling off. Do not hit the carbide cutting edge against a hard object or strongly hit the work material when penetrating the center drill, as it will cause the tip to chip. Do not reduce the number of revolutions during drilling extremely as it may cause biting or chipping of the insert.
Standard type of carbide hole saw. By adopting the step center drill PAT.P, the impact when penetrating the center drill is mitigated. Uses a "10mm / 13mm chuck combined shank" that can be used with any drill chuck diameter. It cannot be used with a drilling machine. * Chuck the three sides of the shank firmly to prevent the shank from shaking or falling off. Do not hit the carbide cutting edge against a hard object or strongly hit the work material when penetrating the center drill, as it will cause the tip to chip. Do not reduce the number of revolutions during drilling extremely as it may cause biting or chipping of the insert.
Standard type of carbide hole saw. By adopting the step center drill PAT.P, the impact when penetrating the center drill is mitigated. Uses a "10mm / 13mm chuck combined shank" that can be used with any drill chuck diameter. It cannot be used with a drilling machine. * Chuck the three sides of the shank firmly to prevent the shank from shaking or falling off. Do not hit the carbide cutting edge against a hard object or strongly hit the work material when penetrating the center drill, as it will cause the tip to chip. Do not reduce the number of revolutions during drilling extremely as it may cause biting or chipping of the insert.
Standard type of carbide hole saw. By adopting the step center drill PAT.P, the impact when penetrating the center drill is mitigated. Uses a "10mm / 13mm chuck combined shank" that can be used with any drill chuck diameter. It cannot be used with a drilling machine. * Chuck the three sides of the shank firmly to prevent the shank from shaking or falling off. Do not hit the carbide cutting edge against a hard object or strongly hit the work material when penetrating the center drill, as it will cause the tip to chip. Do not reduce the number of revolutions during drilling extremely as it may cause biting or chipping of the insert.
Last updated at 03/21/2026 17:39:05
HOLEMAKER TCT HOLESAW 28MM DIA X 4.5MM DEPTH OF CUT MCS28
Delivery between 25–31 Mar $12.90
Holesaw Tungsten Carbide Tipped 28mm MCS28 - Holemaker
Free delivery between 26 Mar – 3 Apr
ITM - Holemaker TCT Holesaw 28mm Dia x 4.5mm Depth Of Cut | MCS28
Delivery between 23–31 Mar $7.95
ITM Holemaker Tct Holesaw 28mm Dia X 4.5mm Depth Of Cut
Delivery $10
| Diameter | 28 mm |
| Depth Of Cut | 4.5 mm |
| Shank Diameter | 10 mm |
HOLEMAKER TCT HOLESAW 28MM DIA X 4.5MM DEPTH OF CUT MCS28
Delivery between 25–31 Mar $12.90
Holesaw Tungsten Carbide Tipped 28mm MCS28 - Holemaker
Free delivery between 26 Mar – 3 Apr
ITM - Holemaker TCT Holesaw 28mm Dia x 4.5mm Depth Of Cut | MCS28
Delivery between 23–31 Mar $7.95
ITM Holemaker Tct Holesaw 28mm Dia X 4.5mm Depth Of Cut
Delivery $10
| Diameter | 28 mm |
| Depth Of Cut | 4.5 mm |
| Shank Diameter | 10 mm |
