Standard type of carbide hole saw. By adopting the step center drill PAT.P, the impact when penetrating the center drill is mitigated. Uses a "10mm / 13mm chuck combined shank" that can be used with any drill chuck diameter. It cannot be used with a drilling machine. * Chuck the three sides of the shank firmly to prevent the shank from shaking or falling off. Do not hit the carbide cutting edge against a hard object or strongly hit the work material when penetrating the center drill, as it will cause the tip to chip. Do not reduce the number of revolutions during drilling extremely as it may cause biting or chipping of the insert.
Standard type of carbide hole saw. By adopting the step center drill PAT.P, the impact when penetrating the center drill is mitigated. Uses a "10mm / 13mm chuck combined shank" that can be used with any drill chuck diameter. It cannot be used with a drilling machine. * Chuck the three sides of the shank firmly to prevent the shank from shaking or falling off. Do not hit the carbide cutting edge against a hard object or strongly hit the work material when penetrating the center drill, as it will cause the tip to chip. Do not reduce the number of revolutions during drilling extremely as it may cause biting or chipping of the insert.
Standard type of carbide hole saw. By adopting the step center drill PAT.P, the impact when penetrating the center drill is mitigated. Uses a "10mm / 13mm chuck combined shank" that can be used with any drill chuck diameter. It cannot be used with a drilling machine. * Chuck the three sides of the shank firmly to prevent the shank from shaking or falling off. Do not hit the carbide cutting edge against a hard object or strongly hit the work material when penetrating the center drill, as it will cause the tip to chip. Do not reduce the number of revolutions during drilling extremely as it may cause biting or chipping of the insert.
Standard type of carbide hole saw. By adopting the step center drill PAT.P, the impact when penetrating the center drill is mitigated. Uses a "10mm / 13mm chuck combined shank" that can be used with any drill chuck diameter. It cannot be used with a drilling machine. * Chuck the three sides of the shank firmly to prevent the shank from shaking or falling off. Do not hit the carbide cutting edge against a hard object or strongly hit the work material when penetrating the center drill, as it will cause the tip to chip. Do not reduce the number of revolutions during drilling extremely as it may cause biting or chipping of the insert.
Last updated at 04/14/2026 01:15:54
HOLEMAKER TCT HOLESAW 58MM DIA X 4.5MM DEPTH OF CUT MCS58
Delivery between 16β22 Apr $12.90
ITM Holemaker Tct Holesaw 58mm Dia X 4.5mm Depth Of Cut
Delivery $10
ITM - Holemaker TCT Holesaw 58mm Dia x 4.5mm Depth Of Cut | MCS58
Delivery between 14β22 Apr $7.95
HOLEMAKER Tct Holesaw 58Mm Dia X 4.5Mm Depth Of Cut | MCS58
Delivery between 14β22 Apr $29.10
| Diameter | 58 mm |
| Depth Of Cut | 4.5 mm |
| Shank Diameter | 10 mm |
HOLEMAKER TCT HOLESAW 58MM DIA X 4.5MM DEPTH OF CUT MCS58
Delivery between 16β22 Apr $12.90
ITM Holemaker Tct Holesaw 58mm Dia X 4.5mm Depth Of Cut
Delivery $10
ITM - Holemaker TCT Holesaw 58mm Dia x 4.5mm Depth Of Cut | MCS58
Delivery between 14β22 Apr $7.95
HOLEMAKER Tct Holesaw 58Mm Dia X 4.5Mm Depth Of Cut | MCS58
Delivery between 14β22 Apr $29.10
| Diameter | 58 mm |
| Depth Of Cut | 4.5 mm |
| Shank Diameter | 10 mm |
